Blaupunkt Freiburg RCM 45 User manual

Freiburg
RCM 45
Radio / Cassette
Operating instructions

3
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
103
20 19 18
1491
17 16
1312
15
11874 52 6

17
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Contents
Short instructions ........................ 18
Important notes ............................ 21
Precautions ........................................... 21
Traffic safety ......................................... 21
Installation/Connection.......................... 21
KeyCard theft-protection
system ........................................... 22
Putting the unit into operation ............... 22
Removing the KeyCard......................... 22
“Defining” a second KeyCard/
Replacing a KeyCard ............................ 22
Optical indication for extra security ....... 22
Radio operation with RDS ........... 23
AF - Alternative frequency .................... 23
REG - regional programme................... 23
Automatic tuning................................ 23
Manual tuning .................................... 24
Scrolling through the broadcasting
network ................................................. 24
Changing the memory bank.................. 24
Storing stations ..................................... 24
Automatically storing the strongest
stations with Travelstore ....................... 24
Recalling stored stations....................... 24
Scanning stored stations
with Preset Scan ................................... 25
Sampling all stations to be received
with Scan .............................................. 25
Selecting the seek tuning sensitivity ..... 25
Switching from stereo to mono ............. 25
Receiving traffic programme
stations with RDS-EON................ 26
Traffic announcement priority on/off ..... 26
Warning beep........................................ 26
Switching the warning beep off.......... 26
Automatic seek tuning start................... 26
Adjusting the volume for traffic
announcements and the warning beep . 26
Tape operation.............................. 27
Inserting a tape ..................................... 27
Removing a tape................................... 27
PROG selector...................................... 27
Fast Forward/Rewind............................ 27
Tape equalisation with MTL .................. 27
Switching the audio source with SRC ... 27
Tape care .............................................. 28
DSC programming........................ 28
Overview of the DSC factory settings ... 29
CD changer control (optional)..... 30
Switching to changer operation
with SRC on the car radio ..................... 30
Track using the rocker switch /
selecting a disc ..................................... 30
SCAN .................................................... 30
MIX........................................................ 30
Appendix....................................... 31
Specifications........................................ 31

Freiburg RCM 45
18
Fader front
Fader rear
Balance left
Balance right
To alter a setting,
• press AUD or GEO and then chan-
ge the value with the rocker switch.
The adjusted value is indicated in the
display.
The last setting will be stored automati-
cally.
To finish the setting: Press AUD or
GEO.
If the setting remains unchanged within
8 seconds, the display will switch back
to the previous condition.
4DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings to
suit your personal needs and prefe-
rences. See chapter “DSC pro-
gramming” for more information.
2LD
Loudness - When listening at a low
level, the Loudness function creates a
more natural sound by boosting the low
frequency range.
To switch the Loudness on/off:
Press LD.
For more information, read chapter
“DSC programming”.
3AUD/GEO
AUD –
To adjust the treble and bass frequen-
cies with the rocker switch.
Treble +
Treble –
Bass –
Bass +
GEO –
To adjust the balance (left/right) and
fader (front/rear) with the rocker switch.
Short instructions
1On Off
Volume
This unit can also be switched on and
off with the KeyCard C.
Also, when being connected correctly,
you may turn the radio on and off via
the ignition of your car.
Use one of the following possibilities to
continue operating the set when the
ignition is switched off:
a) Switch on/off with knob 1.
b) Remove/insert the KeyCard.
c) Press AUD 3.
When turning on the unit with the Key-
Card or by pressing the AUD button,
the system will start to play with the
volume adjusted last.
When operating the unit with the igniti-
on being switched off, the system will
automatically shut down after one hour
in order to avoid that the battery goes
flat.

19
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
;Display
Radio operation:
NDR1 NDS- Station abbreviation
FM - Waveband
T-Memory bank (I, II, T)
5-Preset button (1 - 6)
-Stereo
lo - Seek tuning sensitivity
AF - Alternative RDS frequency
TP - Traffic programme identifier
TA - Priority for traffic programme
stations
LD - Loudness
Tape operation:
TR1--PLAY- Side 1 (or 2)
MTL - Metal
CD changer operation (optional):
CD 05 - Disc number
T 02 - Title number
To switch over: Press lo briefly.
For more information, see chapter
“DSC programming”.
7MTL
Press when using metal or CrO2tapes.
“...--MTL” lights up in the display.
To switch the functions on or off:
Press the MTL button during tape ope-
ration until the desired condition is dis-
played.
8MIX
Changer operation (optional)
See chapter “CD changer control”.
9Cassette removal
Press .
:Cassette loading slot
Insert tape (side A or 1 up; the open
side facing to the right).
5AF - Alternative frequency during RDS
operation
When “AF” lights up in the display, the
radio will automatically search for a
frequency offering better reception of
the same RDS programme.
To switch AF on/off: Press AF briefly.
Extra function:
REG ON / REG OFF - With REG ON
the system will only switch to a better
alternative frequency if the latter be-
longs to a linked station offering the
same regional programme (see “REG -
regional programme).
To switch REG on or off: Press AF until
“REG ON” or “REG OFF” appears in
the display (BEEP tone).
6lo
To alter the automatic seek tuning sen-
sitivity.
If lo is displayed, the radio will only pick
up strong, local stations (low sensitivi-
ty).
If lo does not light up, the radio will also
pick up weaker, distant stations (high
sensitivity).

Freiburg RCM 45
20
<PROG button / Fast winding
To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows TR1--... or TR2--...
FR :Fast rewind; stop by pressing FF.
FF :Fast forward; stop by pressing FR.
=SC
Radio operation
Scan (sampling all stations to be recei-
ved): Press SC briefly.
Preset Scan (sampling all stations
stored on the preset buttons): Press SC
for approximately 2 seconds.
Changer operation (optional)
See chapter “CD changer control”.
>SRC (Source)
To switch between the available audio
sources, e.g. tape, radio, CD changer
(optional).
?1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each FM
memory bank (I, II, T).
To store a station: Press button during
radio operation and hold down until the
radio resumes play.
To recall a station: Select the wave-
band and on FM also the desired me-
mory bank (press FM button as many
times as required) or TS selec. Then
press the corresponding preset button
briefly.
@TA (priority for traffic announcements)
If “TA” is displayed, the system will play
traffic stations only.
TA on/off: Press button.
ATS, Travelstore
To store the six most powerful stations
automatically with Travelstore:
Store: Press TS; until seek tuning
starts in the display.
Recall: Press TS. The display shows
“T”. Then briefly press one of the preset
buttons 1 to 6.
BFM
To switch between the FM memory
banks I and II.
To switch over:
Press button as many times until the
desired bank is indicated in the display.
CKeyCard theft-protection system
To operate the set it is necessary that
you have inserted the KeyCard.
KeyCard
For this, introduce the KeyCard into the
slot with the contact area showing up
(KeyCard tongue pulled out).
Read also the information under “Key-
Card theft-protection system”.
Flashing KeyCard tongue
When the car radio is turned off, the
KeyCard tongue can be switched to
flash for extra anti-theft protection. This
feature can be switched on and off via
DSC-LED.
For more information, see chapter
“DSC programming”.

21
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Installation/Connection
If you would like to install this equipment
yourselforaddanynewcomponents,please
read the enclosed installation and connec-
tion instructions carefully.
Do not connect the loudspeaker outputs to
ground!
Use only the accessory and replacement
parts approved by Blaupunkt.
Important notes
Precautions
Before starting to use your new car radio,
please read the information on “Traffic safe-
ty” and “KeyCard theft-protection system”
carefully.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situationatalltimes.Neveruseyourcarradio
in a way that could distract you.
Please keep in mind that you travel a di-
stanceof14m per second at aspeedofonly
50 km/h.
Should the traffic situation become particu-
larlydemanding,weadviseyounottousethe
radio.
Always make sure that you are still able to
hear any warning signals coming from outsi-
deofthevehicle,suchaspoliceorfireengine
sirens, so that you can react accordingly.
Therefore,youshouldalwaysselectamode-
rate volume for playing your car radio while
you are driving.
DRocker switch
Seek tuning
Up
Down
/ Up/down in short intervals
(“AF” must be switched off)
/ To scroll through the broadcasting
network when “AF” is activated
(e.g. NDR1 ... NDR4).
Extra functions:
In the DSC mode:
Select and programme
DSC functions.

Freiburg RCM 45
22
The display will switch to “CHANGE”.
•Press the KeyCard in, which releases
the card and puts it in the proper positi-
on for being removed.
•Remove the first KeyCard and insert
the new one while “CHANGE” is still
being displayed.
Now you can also use the new KeyCard for
operating your unit.
Amaximumoftwocardscanbeusedperset.
When trying to „define“ a third one, the
system will automatically delete the access
authorisation of that KeyCard which was not
used for the „learning“ process.
Optical indication for extra
security
When the car is stationary, the KeyCard
tonguecanbeswitchedtoflashforextraanti-
theft security.
For this, the following requirements must be
fulfilled:
Permanent 12 V supply and the + ignition
leadmustbeconnectedcorrectly(asillustra-
ted in the installations instructions).
„LED 1“ must be adjusted in the DSC mode.
Pleaserefer to chapter„DSC programming -
LED“.
KeyCard theft-protection system
If a wrong KeyCard is inserted, then “CARD
ERR” will appear in the display. In this case
please do not go on operating the set.
After approximately 10 seconds, the display
will show “TURN OFF”. Now turn off the set.
Wheninsertinga card of adifferentkind(like
for example a phone or credit card), the
display will show "WRONG KC" for approxi-
mately 2 seconds.
Remove the wrong card and turn off the set.
Do not make further adjustments until you
have a correct KeyCard available.
Removing the KeyCard
Never pull out the KeyCard directly.
•First press the KeyCard in.
This releases the card and puts it in the
proper position for being removed.
•Now you can pull it out.
“Defining” a second KeyCard/
Replacing a KeyCard
While operating the unit with the first Key-
Card, you can “define” a second one to be
also used with the set:
•Insert the first KeyCard and turn on the
set.
•Press the DSC button and select
“LEARN KC” with / .
Textteile A - E Casablan-
ca RCM 85
Englisch + Spanisch
Englisch:
A:
(10) KeyCard theft-pro-
tection system
To operate the set it is ne-
cessary that you have in-
serted the KeyCard.
For this, introduce the
KeyCard into the slot with
the contact area showing
up (KeyCard tongue pul-
led out).
Read also the information
under „KeyCard“.
Flashing KeyCard ton-
gue
When the car radio is tur-
ned off, the KeyCard ton-
gue can be switched to
flash for extra anti-theft
protection. This feature
can be switched on and
off via DSC - CODE-LED.
This car radio is supplied with one KeyCard
as standard.
However, the unit can also be operated with
a second card.
If you have lost or damaged your KeyCard,
youcanbuyanewonefromyourspecialised
dealer.
When using two KeyCards, you can indivi-
dually store the following functions:
Bass, treble, balance and fader settings,
assignments of preset buttons, Loudness,
TA (traffic announcement volume), BEEP
volume.
In addition to this, the settings activated be-
fore switching the radio off, such as the
waveband, station, TA priority, Loudness,
AF, REG ON/OFF and seek tuning sensitivi-
ty, will also remained stored.
Thisensuresthatthebasicsettingsyouhave
programmed will automatically be activated
assoon as youhave inserted yourKeyCard.
Putting the unit into operation
•Turn on the set and introduce the Key-
Card into the slot with the contact area
showing up (KeyCard tongue pulled
out).
The car radio is now ready for operation.

23
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
If you leave the service area of the regional
programme tuned into, or if you would like to
takeadvantageofthefullRDSservice,switch
to “REG OFF”.
•Press the AF button for approximately
2 seconds until “REG OFF” appears.
When active, “REG ON” will be briefly dis-
played each time the radio is switched on.
Automatic tuning /
• Press / ; the car radio will automati-
cally search for the next station.
Whenkeepingtheupperorlowerpart / of
therockerswitchdepressed,seektuningwill
speed up in upwards or downwards direc-
tion.
Automatic tuning
Up
Down
/ Up/down in short intervals
(“AF” must be switched off)
/ To scroll through the broadcasting
network when “AF” is activated
(e.g. NDR1 ... NDR4).
Radio operation with RDS (Radio Data System)
While searching for the strongest reception
signal, the radio may switch to mute briefly.
If “SEARCH” appears in the display when
switching on the radio or recalling one of the
stored frequencies, the unit is automatically
searching for an alternative frequency.
“SEARCH” will disappear from the display
when the alternative frequency has been
found or after the frequency band has been
run through completely.
If the reception quality of the selected pro-
gramme becomes too bad:
•Tune into another station.
REG - regional programme
Certain radio programmes are split up at
times into regional programmes offering lo-
cal information. The 1st programme broad-
cast by NDR, for example, offers program-
mes with different contents in the northern
statesofGermanySchleswig-Holstein,Ham-
burg and Lower Saxony at certain times of
the day. If you are listening to one program-
me and move to an area where another
linked regional programme becomes stron-
ger, the unit will switch to that programme.
If you wish to continue listening to the first
programme,
•press the AF button for approximately 2
seconds.
“REG ON” appears in the display.
The Radio Data System offers you more
convenience when listening to FM radio sta-
tions.
More and more radio stations have begun to
broadcast RDS information alongside their
programmes.
Assoonasaprogrammehasbeenidentified,
the station name including a regional identi-
fier, if applicable, will appear in the display,
for example, NDR1 NDS (regional program-
me in Lower Saxony, Germany).
When RDS is activated, the station buttons
becomeprogramme buttons. You nowknow
exactly which programme you have tuned
into,makingiteasytofindthedesiredstation
quickly.
But RDS offers you further advantages:
AF - Alternative frequency
The AF (Alternative Frequency) function
makes sure that the strongest frequency of
the currently selected programme is always
tuned in automatically.
Thisfunctionis activatedwhen“AF”appears
in the display.
In order to switch this function on or off,
•press the AF button briefly.

Freiburg RCM 45
24
Notice:
Shouldyoutunein astationwhichhasalrea-
dy been stored before, the corresponding
presetbuttonandthememorybankwillbriefly
flash in the display if you have selected
another memory bank.
Automatically storing the stron-
gest stations with Travelstore
You can automatically store the six most
powerful FM stations of your current recepti-
on area sorted according to their signal
strength. This function is particularly conve-
nient on longer trips.
•Press the TS button for more than
2 seconds.
The radio will search for the strongest FM
stationsandstorethemonthe memory bank
T(Travelstore).Whenthis processhasbeen
completed,theradiowillplaythefirststation.
Ifdesired, stations canalso be storedmanu-
ally on the Travelstore bank (see “Storing
stations”).
Recalling stored stations
•Press the FM or TS button to select the
memory bank.
•Press the corresponding preset button
briefly to recall the station.
With this, the requirements for selecting sta-
tions with << >> are fulfilled.
Changing the memory bank
YoucanshiftbetweenthememorybanksI,II
and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.
•Press the FM or TS button as many
times until the desired memory bank
lights up in the display.
Storing stations
On FM, you can store six stations on the
preset buttons 1 to 6 for each of the memory
banks I, II and T.
•Select the desired memory bank with
FM I, II or T with TS.
•Tune in a station with the rocker switch
(either automatically or manually).
•Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, confir-
med by beep).
Now the station has been stored.
Theactivatedpresetbuttonisindicatedinthe
display.
Manual tuning << >>
(prerequisite: AF is switched off!)
• Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.
When holding the right or left part of the
rocker switch pressed down, the frequency
scan is speeded up.
Scrolling through the broad-
casting network
You can use the << >> buttons to tune in
stations of your reception area.
If several programmes of one broadcasting
network can be received, you can scroll
through them in forwards direction pressing
>>, or backwards using the << button, e.g.
NDR1,2,3,4,N-JOY(NorthGermanbroad-
caster).
Forthis it isnecessary that thestations have
beenreceivedatleastonceandthat“AF”has
been activated before (lights up in the dis-
play).
For this purpose, you may start Travelstore
seek operation:
• Press FM or TS for 2 seconds; the sy-
stem starts to run through the frequen-
cy band.
If “AF” does not light up,
• press AF.

25
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching from stereo to mono
Ifreceptionispoor,youmaygetbettersound
quality by switching to mono:
•Press the lo button for approximately 2
seconds.
With mono playback, the stereo sign
will disappear from the display.
Each time the radio is switched on, stereo
playback is activated.
The unit will automatically switch to mono if
the received signal is not strong enough for
stereo playback.
To select a station currently being scan-
ned and switch off the scan function:
• Press SC briefly.
Ifnostationisselected,thescanfunctionwill
be automatically switched off after the fre-
quency band has been run through comple-
tely. The unit will tune in the station listened
to before starting the scan.
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If“lo”doesnotlightup,theradiowillalsopick
upweaker, distant stations (highsensitivity).
To switch over,
• Press lo.
The degree of sensitivity can be altered in
both modes (see also chapter “DSC pro-
gramming”).
Scanning stored stations
with Preset Scan
• Press SC for approximately 2 seconds.
Thestationswillbeplayedforapproximately
8 seconds each.
The positions blinking in the display show
you the memory bank and preset position of
the currently scanned station.
To select a station currently being
scanned and switch off Preset Scan:
• Press SC briefly.
Sampling all stations to be
received with Scan
Beginningwith the stationcurrentlytuned in,
you can scan the waveband. The radio will
play each station for 8 seconds.
To start the scan:
• Press SC briefly.
The scanned frequency or the station
name will start flashing in the display.
During the actual scanning process
“SCAN” will be displayed.

Freiburg RCM 45
26
Receiving traffic programme stations with RDS-EON
Traffic announcement priority
on/off
If the priority for traffic announcement pro-
grammesisactivated,“TA”willlightupinthe
display.
To switch the priority on or off:
•Press the TA button.
WhenpressingTA while a message is being
broadcast, this message will be interrupted.
Theunit will then switchbacktothe previous
condition.Thepriorityforothertrafficmessa-
ges remains active.
Warning beep
If you leave the reception area of the traffic
programme station currently tuned into, you
will hear a warning beep after approximately
30 seconds.
This alarm tone will also be released when
pressing a preset button which has no traffic
programme allocated to it.
Switching the warning beep off
a) Tune into another station offering traffic
information:
•Press the rocker switch or
•apreset button which has a traffic
programme station allocated to it.
Alternatively:
b) Switch off the priority for traffic an-
nouncements:
• Press TA.
“TA” will disappear from the display.
Automatic seek tuning start
(tape operation)
Whenleavingthereceptionareaofthetuned
intrafficprogrammestation whilelisteningto
a tape, the system will automatically start
searching for a new TA programme.
If no such station is found within approxima-
tely 30 seconds, tape operation will be stop-
ped and a warning beep will sound.
To switch the warning beep off, proceed as
described above.
Adjusting the volume for traffic
announcements and the warning
beep
This volume was preset at the factory.
YoucanalterthevalueusingtheDSCfunction
(see “DSC programming, TA VOL”).
Many FM broadcasters offer traffic messa-
gesfortheirserviceareaatregularintervals.
All traffic programme stations transmit a
special carrier signal alongside their pro-
grammes, which is decoded by your car
radio. If this signal is identified, “TP” will
appear in the display (Traffic Programme).
In addition to these, there are also stations
which do not actually transmit traffic pro-
grammes themselves, but by using RDS-
EON they offer the possibility to receive the
trafficmessagesbroadcastbyanothertraffic
programme station in the same radio net-
work. If you listen to one of these stations
(e.g. NDR3), “TP” will appear in the display
provided the priority for traffic programme
stations has been activated, i.e. “TA” must
be displayed.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
trafficprogrammestation(inthiscase,NDR2)
forthedurationofthemessageandreturnto
the original programme (NDR3) afterwards.

27
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
other side (Autoreverse). The display shows
“TR1---...”fortrack(side)1orAor “TR2---...”
for track 2 or B.
Notice:
Ifthereistoomuchtensiononthetapeduring
playback, the set may switch over by itself
before having reached the end of the tape
side. In this case check the condition of the
cassette tape. Sometimes it helps to rewind
it completely.
Fast Forward/Rewind
Fast Forward
• Press FF.
At the end of a tape side, the mecha-
nism changes directions automatically
to play the other side.
Stopping Fast Forward operation
• Press FR.
Fast Rewind
• Press FR.
At the beginning of the tape, the me-
chanism will automatically start play-
back.
Stopping Fast Rewind operation
• Press FF.
Tape equalisation with MTL
SwitchontheMTLfunctiontoselectthebest
equalisation response when using metal or
CrO2tapes. “...--MTL” will light up in the
display.
To switch MTL on/off:
•Press the MTL button repeatedly during
tape operation until the desired conditi-
on is displayed (“MTL ON” or
“MTL OFF”).
Switching the audio source
with SRC (Source)
Using this function you can switch between
radio,tapeandCDchanger(optional)opera-
tion or playback of any other connected de-
vice.
To switch over:
•Press the SRC button.
Tape operation
Inserting a tape
•Turn on the set.
•Insert a tape.
Insert the tape with side A or 1 showing up, the
open side facing to the right.
=Press to eject the tape.
The tape will be played in the direction used
last.
“TR1--...”inthedisplaymeansthattrack1or
A is being played.
Removing a tape
• Press .
The cassette will eject.
PROG selector
(To change the tape direction during
cassette playback)
• Press FR and FF simultaneously.
At the end of a tape side, the mechanism
changes directions automatically to play the

Freiburg RCM 45
28
DIS (lo off)
To adjust the seek tuning
sensitivity for distant recep-
tion.
DIS. 1- high sensitivity
DIS. 3- low sensitivity
TIME ON/OFF To select the display mode
during CD changer opera-
tion (option).
TIME ON - display of title
and playback time.
TIME OFF - display of CD
and title number.
If SCAN or MIX is active,
the system will always
switch to the TIME OFF
mode.
LEARN KC To “define” a second Key-
Card for use with the set.
Please read the information
under “KeyCard theft-pro-
tection system”.
TA VOL To adjust the traffic an-
nouncement volume from
between 1 to 9. The mes-
sage will then come
through at this volume.
(1 = low)
Tape care
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
coolplaceaway from dirt, dust andtempera-
turesexceeding50°Celsius.Allowverycold
tapes to warm up before playing them in
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirtbuild-up.Fortoughercases,useacotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
DSC programming
DSC (Direct Software Control) allows you to
customise certain programmable, basic set-
tings to suit your personal needs and prefe-
rences and then store them.
The basic settings for this audio equipment
weremadeatthefactory.Inthefollowingyou
canfindanoverviewofthesesettings,sothat
you can always reset to these if desired.
If you wish to alter any of the programming,
• press DSC.
The display will show the function adjusted
last.
Usetherockerswitchtoselectandadjustthe
functions described in the following.
/ Select function
Adjust value –
Adjust value +
LOCAL (lo)
To adjust the seek tuning
sensitivity for local recepti-
on.
LOCAL 1 - high sensitivity
LOCAL 3 - low sensitivity

29
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
BEEP Confirmation tone for all
functions which require a
button to be pressed for
more than 2 seconds.
The volume can be adju-
sted from between 0 to 9.
(0 = off)
Each alteration of this va-
lue is confirmed by a beep
tone of the corresponding
volume.
LED (code) You can adjust the Key-
Card tongue Cto flash for
extra anti-theft protection.
LED 1 - LED always flas-
hes when the unit
has been swit-
ched off via the
ignition and the
KeyCard remo-
ved.
LED 0 - No flashing.
LOUD Loudness - When listening
at a low level, the Loud-
ness function creates a
more natural sound by
boosting the low frequency
range.
LOUD 1- Low boost
LOUD 6- Max. boost
RM (Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.
To quit the DSC programming mode and
store the adjustment:
• Press DSC.
If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.
Overview of the DSC factory
settings
LOCAL : 1
DIS : 1
TIME : OFF
TA VOL : 4
BEEP : 3
LED (Code) : 1
LOUD : 4
RM : OFF

Freiburg RCM 45
30
CD changer control (optional)
Track using the rocker switch /
Selecting a disc
Select track (upwards): Press briefly.
CUE - fast advance (audible):
Press and hold down.
Repeat track: Press briefly.
Select track (downwards): Press repeated-
ly.
REVIEW - fast reverse (audible):
Press and hold down.
Select disc (downwards)
Select disc (upwards)
The display shows you the selected mode.
SCAN
Use this function to scan the CD tracks.
To start the SCAN:
•Press the SC button briefly. The tracks
will be played briefly one after the other
in ascending order. The number of the
currently scanned track flash-es in the
display.
To stop the SCAN:
•Press the SC button briefly once again.
The system will continue to play the
currently scanned track.
MIX
UsetheMIXfunctiontoplaythetracks of the
individual discs in random order. Note that
the discs themselves will be selected in nu-
meric order according to their position in the
changer.
To start the MIX function:
•Press the MIX button for approximately
4 seconds. The CD number and ‘MIX’
will appear in the display.
To stop the MIX function:
• Press MIX briefly.
Notice:
In may happen in isolated cases that the
changerfailstofunctionproperlyduetovolta-
ge drops (e.g. when starting the engine). In
such a case, briefly switch the car radio off
and on again.
Thechangerwillthenreturntonormalopera-
tion.
You can operate the Blaupunkt CD changer
CDC-A05 in combination with this car radio.
Switching to changer operation
with SRC on the car radio
Make sure that a magazine is inserted.
Press SRC to switch between the different
audio sources (radio - changer - tape).
Press SRC as many times until the changer
functions appear in the display.
CD = disc, T= TRACK (title).
0:24 = playback time of the current title

31
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Appendix
Specifications
Amplifier
Output power: 4 x 6 W RMS power
acc. to DIN 45324/3.1
or
4 x 8 W max. power acc.
to DIN 45324/3.2
FM waveband
Sensitivity: 1,0 µV at 26 dB
signal-to-noise ratio
Frequency
response: 35 - 16 000 Hz
Tape player
Frequency
response: 35 - 16 000 Hz
Subject to modifications!

17
Freiburg RCM 45
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Blaupunkt-Werke GmbH
Bosch Gruppe
4/95 Pf K7/VKD 8 622 400 020 PM