Blaupunkt MIAMI Miami CD72 User manual

Radio / CD
Miami CD72
Orlando CD72
Seattle CD72
Montreal CD73
Operating instructions
http://www.blaupunkt.com

2
Bitte aufklappen
Open here
Ouvrir s.v.p.
Aprite la pagina
Hier openslaan a.u.b.
Öppna
Por favor, abrir
Favor abrir
Åbn her

3
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
7
9
12
1
11
8
24
10
356

33
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
1Button, to switch the unit on/off,
adjust the volume
2Button, to unlock the remova-
ble control panel (release panel)
3NEXT button to display the other
pages in a menu and to switch
to a different memory bank in ra-
dio mode
4Softkeys: the function of the
softkeys depends on the current
display content
5DEQ+ button, to open the equal-
izer menu
6button, to open the flip-re-
lease control panel
7Joystick
8MENU button, to open the basic
settings menu
9AUDIO button, to adjust the
bass, treble, balance, fader and
loudness (short press) and oper-
ate the volume mute feature
(long press)
:Display
;SOURCE button to start CD
playback / CD-changer playback
or Compact Drive MP3 (only if
connected)
or
To play an external audio source
(only if connected)
<TUNER button, to activate radio
mode and open the radio func-
tions menu (only possible in ra-
dio mode)
CONTROLS

34
Notes and accessories .......... 35
Road and traffic safety ................... 35
Safety information .......................... 35
Installation ..................................... 35
Accessories .................................. 35
Removable control panel ....... 36
Switching on/off .................... 37
Adjusting the volume ............. 38
Sound and volume distribution
settings .................................. 40
Adjusting the bass ......................... 40
Adjusting the treble ....................... 40
X-BASS ........................................ 40
Adjusting the right/left volume
distribution (balance) ..................... 40
Adjusting the front/back volume
distribution (fader) ......................... 41
Adjusting the display.............. 41
Adjusting the viewing angle ........... 41
Adjusting the display brightness..... 41
Setting the button illumination
colour............................................ 42
Setting the level display ................. 42
Radio mode ............................ 43
Configuring the tuner..................... 43
Switching to radio mode ................ 43
Convenient RDS functions
(AF, REG) ..................................... 43
Selecting the waveband /
memory bank................................. 44
Tuning into a station ....................... 45
Setting the sensitivity of station
seek tuning.................................... 45
Storing stations ............................. 45
Storing stations automatically
(Travelstore) .................................. 46
Listening to stored stations ............ 46
Programme type (PTY) .................. 46
Optimising radio reception............. 47
Setting the radiotext display ........... 48
Traffic information .................. 48
CD mode ................................ 49
Switching to CD mode and
inserting a CD ............................... 49
Removing a CD ............................. 50
Selecting tracks ............................ 50
Fast searching (audible) ................ 50
Random track play (MIX) ............... 50
Repeating tracks (REPEAT) ........... 50
Displaying CD text ......................... 51
Setting scrolling text ...................... 51
Traffic announcements in CD
mode............................................. 51
CD changer mode (optional) . 52
Switching to CD changer mode..... 52
Selecting CDs ............................... 52
Selecting tracks ............................ 52
Fast searching (audible) ................ 52
Repeating individual tracks or
whole CDs (REPEAT).................... 52
Random track play (MIX) ............... 53
Naming CDs ................................. 53
CLOCK - Time ........................ 55
Equalizer ................................ 56
TMC for dynamic navigation
systems .................................. 60
Preamplifier............................ 60
External audio sources .......... 61
Specifications ........................ 61
Installation instructions ........ 268
CONTENTS

35
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Notes and accessories
Thank you for deciding to use a Blau-
punkt product. We hope you enjoy us-
ing this new piece of equipment.
Please read these operating instruc-
tionsbefore using theequipmentfor
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the equip-
ment, please contact your dealer or the
telephone hotline for your country. You
will find the telephone numbers printed
at the back of this booklet.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
antee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Road and traffic safety
Road and traffic safety have ab-
solutepriority.Only operateyourcar
radioiftheroadandtrafficconditions
allow you to do so. Familiarise your-
selfwith thedevice beforesettingoff
on your journey.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, set the
volume of whatever you are listen-
ing to at a reasonable level.
Safety information
The car radio and the device's
controlpanel(flip-releasepanel)heat
up during use. Therefore, when re-
moving the flip-release panel, only
hold it by its non-metallic surfaces.
Allow the car radio to cool down first
ifyouwanttouninstallthewholeunit.
Installation
Ifyouwanttoinstallyourcarradioyour-
self, please read the installation and
connectioninstructionsthatfollowthese
operating instructions.
Accessories
OnlyuseaccessoriesapprovedbyBlau-
punkt.
Remote control
The RC 08, RC 10 or RC 10H remote
controls(availableasoptionalaccesso-
ries) allow you to safely and conven-
ientlyaccessthemainfunctionsofyour
car radio.
NOTES AND ACCESSORIES

36
Amplifier
All Blaupunkt amplifiers can be used.
Calibration microphone
Youcanusethecalibrationmicrophone
(available as an accessory) for the
equalizer’sautomaticsoundcalibration
feature.
CD changer
The following CD changers can be ob-
tained from accessory retailers for con-
nectionwiththisdevice:CDCA02,CDC
A 08, CDCA 072 und IDC A 09.
You can also connect the CDC A 071
CD-changer by using an adapter cable
(Blaupunkt no.: 7 607 889 093).
Compact Drive MP3
As an alternative to a CD changer, you
can connect a Compact Drive MP3 to
access MP3 music tracks. If you con-
nectaCompactDriveMP3,youwillfirst
needtouseacomputertostoretheMP3
musictracksontheMicrodrive(tm)hard
disk inside the Compact Drive MP3.
Then, when the Compact Drive MP3 is
connectedtothecarradio,youcanplay
the tracks like normal CD music tracks.
The Compact Drive MP3 is operated in
the same way as a CD changer. Most
of the CD changer functions can also
be used with the Compact Drive MP3.
NOTES AND ACCESSORIES
Removable control panel
Theft protection
As a way of protecting your car radio
against theft, the unit is equipped with
a removable control panel (flip-release
panel). Without this control panel, the
car radio is worthless to a thief.
Protectyourequipmentagainsttheftby
taking the control panel with you every
time you leave your vehicle. Do not
leave the control panel in your vehicle -
not even in a hiding place.
The control panel has been designed
to be easy to use.
Note:
●Never drop the control panel.
●Never expose the control panel to
direct sunlight or other heat sourc-
es.
●Store the control panel in the sup-
plied case.
●Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth soaked in alcohol.
Detaching the control panel
2
THEFT PROTECTION

37
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
➮Press the button 2.
The control panel latch mechanism
opens.
➮First, pull the control panel straight
off the unit and then out towards
the left.
●The unit switches off after the con-
trol panel is removed.
●All the current settings are saved.
●Any CD already inserted in the unit
remains there.
Attaching the control panel
➮Slide the control panel from left to
right into the unit’s guide.
➮Press the left-hand edge of the
control panel into the unit until it
clicks into place.
Note:
●When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
lastsettingsactivated(i.e.radio,CD,CD
changer/Compact Drive MP3 or AUX)
when the panel is replaced.
THEFT PROTECTION
Switching on/off
Therearevariouswaysofswitchingthe
unit on/off.
Switching on/off using button
1
➮To switch the unit on, press button
1until you feel the latch open and
the button pushes out.
The unit switches on.
➮To switch the unit off, press button
1until you feel it click into place.
The unit switches off.
Switching on/off using the
vehicle ignition
If the device is correctly connected to
the vehicle’s ignition and the unit was
not switched off using button 1, it will
switch on/off simultaneously with the
ignition.
You can switch the unit on even if the
ignition is off.
➮To do so, press button 1so that
you feel it unlatch and push out.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour if the ignition is off.
SWITCHING ON/OFF

38
Adjusting the volume
The volume can be adjusted in stages
from 0 (off) to 50 (maximum).
➮To increase the volume, turn the
volume control 1to the right.
➮To decrease the volume, turn the
volume control 1to the left.
Setting the power-on volume
You can set the unit’s default power-on
volume.
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “VOL”display item.
➮Press the softkey 4assigned to
the “ON”display item.
➮Set the required volume using the
volume control 1.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Note:
To avoid damage to your hearing, the
power-on volume is limited to a value
of “40”.
Activating mute
This feature allows you to instantane-
ously reduce the volume (mute).
➮Press the AUDIO button 9for
longer than two seconds
“MUTE”appears in the display.
Cancelling mute
➮Briefly press the AUDIO button 9.
or
➮turn the volume control 1.
Telephone audio / navigation
audio
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up”the telephone or as
soon as a navigation announcement is
made. The caller or voice output will
then be heard over the car radio loud-
speakers. In order for this to work, the
mobile telephone or navigation system
must be connected to the car radio in
themannerdescribedintheinstallation
instructions.
You can find out from your Blaupunkt
dealerwhichnavigationsystemscanbe
used with your car radio.
If a traffic information message is re-
ceived during a telephone call or whilst
a navigation announcement is being
made, the traffic message will only be
played after the call or voice output is
finished.
ADJUSTING THE VOLUME

39
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
If, during a traffic announcement, a tel-
ephone call arrives or the navigation
system wants to output a spoken in-
struction, the traffic announcement is
interruptedandthetelephonecall/voice
output can be heard.
You can set the volume level at which
telephonecallsandthenavigationvoice
output will first be heard.
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “VOL”display item.
➮Press the softkey 4that is as-
signed to the “TEL”display item for
the telephone volume or “NAVI”
display item for the voice output.
➮Set the required volume using the
volume control 1.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Note:
You can also adjust the volume during
thetelephonecallusingthevolumecon-
trol 1.
Automatic sound
This feature automatically adjusts the
volumeofthecarradiotosuitthespeed
at which the vehicle is travelling. In or-
der for this to work, your car radio must
be connected in the manner described
in the installation instructions.
Theautomaticvolumeboostcanbeset
to six levels (0-5). “0”means no boost
and “5”means maximum boost.
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “VOL”display item.
➮Press the softkey 4assigned to
the “AUTO”display item.
➮Set the boost level using the joy-
stick 7.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Note:
The optimum setting for the speed-re-
lated sound adjustment feature de-
pends on how noise levels develop in
your particular vehicle. You will need to
test various settings in order to find out
which is best suited to your vehicle.
ADJUSTING THE VOLUME

40
Sound and volume
distribution settings
Note:
You can adjust the bass, treble and X-
BASS individually for each audio
source.
Adjusting the bass
➮Press the AUDIO button 9.
“AUDIO 1”appears in the display.
➮Press the softkey 4assigned to
the “BASS”display item.
➮Move the joystick 7up or right to
boost the bass or move it down or
left to reduce the bass.
When you have finished making your
changes,
➮press the joystick OK 7or the
AUDIO button 9.
Adjusting the treble
➮Press the AUDIO button 9.
“AUDIO 1”appears in the display.
➮Press the softkey 4assigned to
the “TREB”display item.
➮Move the joystick 7up or right to
boost the treble or move it down or
left to reduce the treble.
When you have finished making your
changes,
➮press the joystick OK 7or the
AUDIO button 9.
X-BASS
The X-BASS feature can be used to
aurallycompensatethebassatlowvol-
ume levels. The X-BASS boost can be
set in steps ranging from 0 (off) to 6
(max). If X-BASS is activated, the con-
figured X-BASS boost level will be dis-
play alongside the X-BASS symbol in
the display.
➮Press the AUDIO button 9.
“AUDIO 1”appears in the display.
➮Press the softkey 4assigned to
the “X-BASS”display item.
➮Move the joystick 7up or right to
boost the X-BASS or move it down
or left to reduce the X-BASS.
When you have finished making your
changes,
➮press the joystick OK 7or the
AUDIO button 9.
Adjusting the right/left volume
distribution (balance)
➮To adjust the balance, press the
AUDIO button 9.
“AUDIO 1”appears in the display.
➮Press the softkey 4assigned to
the “BAL”display item.
➮Move the joystick 7up/right or
down/left to adjust the right/left vol-
ume distribution.
When you have finished making your
changes,
➮press the joystick OK 7or the
AUDIO button 9.
SOUND AND VOLUME DISTRIBUTION SETTINGS

41
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Adjusting the front/back volume
distribution (fader)
➮To adjust the fader, press the AU-
DIO button 9.
“AUDIO 1”appears in the display.
➮Press the softkey 4assigned to
the “FADE”display item.
➮Move the joystick 7up/right or
down/left to adjust the front/back
volume distribution.
When you have finished making your
changes,
➮press the joystick OK 7or the
AUDIO button 9.
Adjusting the display
You can adjust the display to suit the
installation position in your vehicle and
your own preferences.
Adjusting the viewing angle
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “DISP”display item.
➮Press the softkey 4assigned to
the “ANGL”display item.
➮Move the joystick 7up/right or
down/left to adjust the viewing an-
gle.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Adjusting the display brightness
If your car radio has been connected
as described in the installation instruc-
tions, the display brightness will switch
overwhentheheadlightsareturnedon/
off. The display brightness can be ad-
justed separately for night and day in
stepsrangingfrom1-6.Werecommend
setting “6”.
Daytime display brightness
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “DISP”display item.
➮Press the softkey 4assigned to
the “DAY”display item.
VOLUME DISTRIBUTION ADJUSTING THE DISPLAY

42
➮Move the joystick 7up/right or
down/left to adjust the brightness.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Night-time display brightness
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “DISP”display item.
➮Press the softkey 4assigned to
the “NGHT”display item.
➮Move the joystick 7up/right or
down/left to adjust the brightness.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Setting the button illumination
colour
The colour of the device’s button illumi-
nationcanbeadjusted(onlythesoftkey
colours can be changed on the Miami
CD72).Choosebetween“COLOR1”or
“COLOR 2”.
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “DISP”display item.
➮Keep pressing the softkey 4as-
signed to the “KEYS”display item
until the required colour (“COLOR
1”or “COLOR 2”) appears in the
display.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Setting the level display
Theleveldisplaybrieflyprovidesasym-
bolic display of the volume, the sound
control settings and the equalizer set-
tingswhilstyouaremakingyourchang-
es.
When you are not changing any set-
tings, the level display can display the
car radio’s output level. You can also
switchofftheleveldisplayandhavethe
currentvolume level displayed continu-
ously.
Switching the level display on/off
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “DISP”display item.
➮Keep pressing the softkey 4as-
signed to the “EQ”display item un-
til the required setting “EQ DISP
OFF”or “EQ DISP ON”appears.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
ADJUSTING THE DISPLAY

43
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Radio mode
Thisunitisequipped withanRDSradio
receiver.ManyofthereceivableFMsta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears in the dis-
play as soon as it is received. You can
optionally display the programme type.
Forfurther details,pleasereadthe sec-
tion entitled “Programme type (PTY)”.
Configuring the tuner
To ensure that the tuner works proper-
ly, the device must be configured for
your region. You can choose between
Europe and the USA. By default, the
tuner is set to the region in which the
devicewassold.Ifyouexperienceprob-
lemswithradioreception,pleasecheck
these settings.
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “SETP”display item.
➮Press the softkey 4assigned to
the “AREA”display item.
➮Press the softkey 4assigned to
the display item of the region that
you require: “EURO”or “USA”.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Switching to radio mode
If the device is in CD mode, cassette
mode, Multi-Media Card (MMC) mode
(depending on the car radio’s equip-
ment) or CD changer/Compact Drive
MP3 mode,
➮press the TUNER button <.
The main radio menu for tuning into a
station is displayed. The radio mode
functionsarecontrolledintheradiofunc-
tions menu. You can open the radio
functions menu by pressing the TUN-
ER button <again. If you are in any
other mode, you can open the radio
functions menu by pressing the MENU
button 8followed by the softkey 4
that is assigned to the “TUNE”display
item.
Convenient RDS functions
(AF, REG)
The convenient RDS functions AF (Al-
ternativeFrequency)andREG(Region-
al) extend your radio’s range of func-
tions (only in FM radio mode).
●AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
●REG:At certain times, some radio
stations divide their programme
into regional programmes providing
different content. You can use the
REG function to prevent the car ra-
dio from switching to alternative
frequencies that are providing dif-
ferent regional programme content.
RADIO MODE

44
Note:
REG must be separately activated/de-
activated in the radio functions menu.
Switching the RDS function on/off
To use the RDS functions (AF and
REG),
➮press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the softkey 4assigned to
the “RDS”display item.
“RDSON”or“RDSOFF”appearsbriefly
in the display.
To return to the main radio menu,
➮press the TUNER button <or the
joystick OK 7.
The settings are saved.
Switching REG on/off
To use the REG RDS function,
➮press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the softkey 4assigned to
the “REG”display item.
“REGON”or“REGOFF”appearsbrief-
ly in the display.
➮Press the TUNER button <or the
joystick OK 7.
The settings are saved.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM and MW/LW
(AM) frequency ranges. There are four
memory banks for the FM range and
one for each of the MW and LW rang-
es.
Sixstationscanbestoredineachmem-
ory bank.
Selecting the waveband
To selecttheFM,MWorLWwaveband,
➮press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the softkey 4assigned to
the “BAND”display item.
➮Press the softkey 4assigned to
the “FM”display item for the FM
waveband.
➮Press the softkey 4assigned to
the “MW”display item for the MW
waveband.
➮Press the softkey 4assigned to
the “LW”display item for the LW
waveband.
The main radio menu for the selected
waveband appears.
Selecting the FM memory bank
To switch between the FM memory
banks FM1, FM2, FM3 and FMT,
➮keep pressing the NEXT button 3
until the required memory bank ap-
pears in the display.
RADIO MODE

45
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Thememorybanksareaccessedinthe
following order: FM1, FM2, FM3 and
FMT.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮Move the joystick 7down or up.
The unit tunes into the next receivable
station.
Tuning into stations manually
Youcanalso tune intostationsmanual-
ly.
➮Move the joystick 7left or right.
Note:
Youcanonly tune intostationsmanual-
ly if the RDS function is deactivated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes,youhavetheoptionofbrows-
ing through its “broadcasting network”.
➮Move the joystick 7left or right.
Note:
The RDS function must be activated
before you can use this feature.
When using this feature, you will only
be able to switch to stations that you
have received once already.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the NEXT button 3.
➮Press the softkey 4assigned to
the “SENS”display item.
Thedisplayshowsthecurrentlysetsen-
sitivity level. “SENS 6”is the highest
sensitivity setting and means the tuner
can receive distant stations. “SENS 1”
is the lowest setting.
➮Move the joystick 7up/right or
down/left to adjust the sensitivity.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
Storing stations
Storing stations manually
➮Select the required FM memory
bank, i.e. FM1, FM2, FM3, FMT, or
one of the MW or LW wavebands.
➮Tune into the required station as
described in the section entitled
“Tuning into a station”.
➮Press one of the six softkeys for
longer than two seconds to store
the station to that softkey.
RADIO MODE

46
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region(onlyFM).Thestationsarestored
in the FMT memory bank.
Note:
Anystationsthatwerepreviouslystored
in this memory bank are deleted in the
process.
Starting the Travelstore function
➮Press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the softkey 4assigned to
the “TS”display item.
The station storing procedure begins.
“T-STORE”appears in the display. Af-
ter the process is completed, the sta-
tion stored in FMT memory location 1
will be played.
Listening to stored stations
➮Select the memory bank or wave-
band.
➮Press the softkey 4that is as-
signed to the name or frequency of
the station that you want to listen
to.
Programme type (PTY)
Besides transmitting the station name,
someFMstationsalsoprovideinforma-
tiononthetypeofprogrammethat they
arebroadcasting.Yourradiocanreceive
and display this information.
Forexample,theprogrammetypescan
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
PTY-EON
If you specify the programme type and
startseektuning,theunitwillswitchfrom
the current station to a station of the
selected programme type.
Note:
●If no station is found that corre-
sponds to the selected programme
type, you will hear a beep sound
and “NO PTY”appears briefly in
the display. The radio will then re-
tune to the station that was re-
ceived last.
●If the tuned radio station or another
station on the broadcasting net-
work broadcasts the required pro-
gramme type at a later point in
time, the radio automatically
switches from the currently tuned
station or from CD mode / CD
changer mode to the station whose
programme type matches the one
you selected.
RADIO MODE

47
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Activating PTY
To use the PTY function,
➮press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the softkey 4assigned to
the “PTY”display item.
If PTY is activated, the display shows
the current programme type. PTY ap-
pears in the display. The programme
types are displayed alongside the
softkeys 4.
Cancelling PTY
To cancel the PTY function,
➮Whilst the programme types are
being displayed, press the softkey
4assigned to the “OFF”display
item.
Selecting a programme type and
starting seek tuning
The PTY menu is made up of several
pages on which the known programme
typesaredisplayed.Tobrowsethrough
the PTY menu’s pages,
➮keep pressing the NEXT button 3
until the required programme type
appears alongside one of the
softkeys.
➮Press the softkey 4assigned to
the required programme type.
➮Move the joystick 7up/right or
down/left to start seek tuning.
Thenextreceivablestationcorrespond-
ingtoyourselectedprogrammetypewill
then be tuned into.
If no station is found that corresponds
totheselectedprogrammetype,youwill
hear a beep sound and “NO PTY”ap-
pears briefly in the display. The radio
will then retune to the station that was
received last.
Note:
If you want to switch back to the pro-
gramme types display,
➮briefly move the joystick 7in any
direction.
Optimising radio reception
Treble reduction feature during
interference (HiCut)
TheHiCut function improves the sound
during poor radio reception. If interfer-
ence occurs, the treble is automatically
reduced thus reducing the interference
level.
Setting HiCut
➮Press the TUNER button <in ra-
dio mode.
The first page of the radio functions
menu is displayed.
➮Press the NEXT button 3.
➮Press the softkey 4assigned to
the “HCUT”display item.
➮Move the joystick 7up/right or
down/left to set the HiCut.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
The settings are saved.
RADIO MODE

48
Setting the radiotext display
Some stations use the RDS signal to
broadcast scrolling texts known as ra-
diotexts.You can activate or deactivate
the radiotext display.
➮Press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the NEXT button 3.
The“secondpage”oftheradiofunctions
menu is displayed.
➮Press the softkey 4assigned to
the “RTXT”display item.
“RTXT ON”or “RTXT OFF”appears
briefly in the display.
➮Press the TUNER button <or the
joystick OK 7.
The settings are saved.
Traffic information
YourunitisequippedwithanRDS-EON
receiver. EON (Enhanced Other Net-
work) is a feature that involves the
broadcasting of radio station informa-
tion within a broadcasting network.
Everytime a trafficannouncement (TA)
is transmitted, you will automatically be
switched from a station that does not
provide traffic information to a station
within the broadcasting network that
does.
Once the traffic announcement has
been heard, you will be switched back
to the programme that you were listen-
ing to before.
Switching traffic information
priority on/off
➮Press the TUNER button <in ra-
dio mode.
Theradiofunctionsmenuappearsinthe
display.
➮Press the softkey 4assigned to
the “TRAF”display item.
Traffic announcement priority is active
when a traffic jam symbol is displayed.
Note:
TheTAmenu is displayed during a traf-
fic announcement.
To interruptthecurrenttrafficannounce-
ment,
➮press the softkey 4assigned to
the “OFF”display item.
Ifyouwanttodeactivate priorityfortraf-
fic announcements,
➮press the softkey 4assigned to
the “TRAF”display item.
RADIO MODE TRAFFIC INFORMATION

49
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Note:
You will hear a warning sound:
●if you leave the reception area of a
traffic information station that you
are currently listening to.
●if, while listening to a CD, cassette
or Multi-Media Card (depending on
the car radio’s equipment), you
leave the reception area of a traffic
information station that you are
tuned into and the subsequent au-
tomatic search cannot find a new
traffic information station.
●if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮Press the MENU button 8.
➮Press the softkey 4assigned to
the “VOL”display item.
➮Press the softkey 4assigned to
the “TRAF”display item.
➮Set the required volume using the
volume control 1.
➮Press the joystick OK 7or the
MENU button 8to close the
menu.
CD mode
You can use this unit to play standard
CDs with a diameter of 12 cm.
CD-Rs (CDs that you have “burned”
yourself) and CD-RWs can generally
alsobeplayed.Duetothevaryingqual-
ity of CDs, Blaupunkt cannot guaran-
tee that this will work properly.
To ensurethe system functions proper-
ly, only use CDs labelled with the com-
pact disc logo. Problems might be ex-
periencedwhentryingtoplaycopy-pro-
tected CDs. Blaupunkt cannot guaran-
tee the proper functioning of copy-pro-
tected CDs!
Risk of severe damage to the
CD drive!
CD singles with a diameter of 8 cm
and non-circular contoured CDs
(shape CDs) must not be used.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
Switching to CD mode and
inserting a CD
●If there is no CD inserted in the unit
yet,
➮press the button 6.
The control panel opens out towards
you.
➮Insert the CD with the printed side
uppermost into the CD compart-
ment.
The CD is drawn into the drive.
TRAFFIC INFORMATION CD MODE