Blaupunkt 5II94290 Guide

[en] Instructions on mounting an use
Hob 5II94290













Montage

Flush Cooktop
Notes about Installation
A flush cooktop is only appropriate for installation in counters made of natural stone (granite
or marble), solid wood or those counters that have tiled. For counters made of other materials,
ask the respective manufacturer, if their product is appropriate for the installation of a flush
cooktop.




























5II94290




















X : Drawer
Y : Built-in cooker / built-in oven

ANWEISUNGEND WARNINGSGB
7
T his instruction handbook is conserved together with the 5II94290 for future consultation. If
the equipment is sold or transferred to another person, make certain the instruction handbook is
supplied together with it, so that the new user can become aware of the operation of the cooker
hood and related warnings. These warnings have been compiled for your safety and the safety
of others. Please take the time to read them carefully before installing and using the equipment.
Be sure to also consult the drawings in the front pages, including the alphabetic and numeric
references in the text descriptions. Closely follow the instructions in this manual. The manufacturer
declines all responsibility for any inconveniences, damage or res caused due to non-compliance
with the instructions in this manual. The installation and electrical connection must be provided
by a qualied service technician. The supplier is not liable for any warranty for damages caused
by improper installation or improper use of the appliance. Do not modify or seek to modify the
specications of this appliance.
T he cooking top must always be used within the limits of normal domestic use, not for
professional use, but simply to prepare and keep dishes warm. Any other use is not allowed. The
unit should not be left unsupervised during its operation.
T his appliance can be used by children from the age of 8 onwards, and by persons with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
provided they are properly monitored, or if they have been instructed in the safe use of the
appliance and are aware of related dangers.
C hildren must not be allowed to play with the appliance. Cleaning and maintenance must not be
carried out by children without proper supervision.
M ake use of the locking device to prevent children from accidentally turning on the device, or
modifying its functions. The unit should not be left unsupervised during its operation.
D o not control the cooking top using a remote timer.
T he unit should not be left unsupervised during its operation.
Make certain children at home are prevented from toppling hot pots and pans to the oor. Turn
the handles and knobs of pots and pans to the side on the cooking top, so that they are above the
cooking top, and to prevent the risk of burns.
F or safety reasons, the cooking top must be used only after having been installed in its recessed
housing.
P rior to proceeding with the installation, check to make sure there are no visible signs of damage
Caution

ANWEISUNGEN
D
WARNINGS GB
8
to the cooking top. Never start up a damaged unit, as it may pose a safety risk.
Do not seal the area between the glass and the worktop with silicone because should the cooktop
need to be replaced, the glass could break during removal.
The unit’s installation and electrical connection to the power grid must be carried out by qualied
service technicians only. The device’s electrical safety can be guaranteed solely if a regular ground
connection is provided for the cooking top. If in doubt, have the electrical system checked by a
qualied electrician. If the power cord is damaged, it must be replaced by a qualied service centre
or technician only.
Do not connect the cooking top to the mains using extension cords or multiple sockets, since they
will not guarantee the required safety (e.g. risk of overheating).
Prior to connecting the cooktop, compare the connection specications (voltage and frequency)
indicated on the unit’s identication nameplate with those of the mains electricity supply.
These specications must absolutely correspond, otherwise the unit may be subject to damage.
Contact an electrician if in doubt.
D isconnect the unit from the mains when carrying out installation work, maintenance or repairs.
Comply with all air discharge regulations.
CAUTION: If the surface is cracked, switch o the appliance to avoid the possibility of electric
shock.
Never open unit’s outer casing. Any contact with live parts or the modication of electrical or
mechanical parts can cause operating abnormalities.
The induction hob should not be used as a work surface. The rough underside of food containers
can scratch the surface of the cooktop.
Always keep the cooking areas and underside of food containers perfectly dry.
Oil and grease that are too hot will catch re quickly. Do not leave overheated oil or grease
unsupervised. If oil or grease should catch re, do not attempt to put out the ames with water.
Extinguish the ames with a lid or plate, or with a reproof blanket. Turn o the cooking zone.
Never place ammable items on the hob.
WARNING: Fire hazard: do not leave objects on the cooking surface.
Fire hazard

ANWEISUNGEND WARNINGSGB
9
CAUTION: This appliance and its accessible parts become very hot during use. Pay attention to
avoid touching the heating elements. Keep children under 8 years of age away from the appliance,
unless they are continually monitored.
D o not place objects such as knives, forks, spoons or lids on the induction top, as they may
overheat.
D o not heat closed containers, such as tin receptacles, on the cooking top. The excess pressure
generated could blow up the container.
O nly ferromagnetic containers are suitable for induction cooking; the following receptacles, in
particular, are suitable: enamelled steel, cast iron, special dishes for induction cooking in stainless
steel.
Use only pots and pans with a smooth bottom. Do not introduce any objects between the bottom
of the pot and the glass ceramic surface, such as adapters.
Cooking zone Minimum diameter Maximum recommended
diameter
1 90mm-100mm
(Booster power)
160mm*
2120mm 200mm*
3120mm 200mm*
4 90mm-100mm
(Booster power)
160mm*
* the maximum recommended diameter corresponds to the diameter of the cooking zone; pots of
a greater diameter can be used but the heat will spread much less uniformly.
T o nd whether receptacles are suitable, check whether they are attracted by a magnet.
A nother type of special receptacle exists for induction cooking, with a bottom that is not
entirely ferromagnetic.
Burn hazard
Suitable food containers

ANWEISUNGEN
D
WARNINGS GB
10
N ever use recipients made of: normal negrained steel, glass, pottery, copper and
aluminium. Do not place empty containers on the cooking zone, as they may cause
damage.
D o not place hot recipients on the control panel, in the area of the pilot lights or on the edge of
the cooking top, as they may cause damage.
P ots from which liquids have completely evaporated can cause damage to the glass ceramic top,
for which the manufacturer does not assume any responsibility.
WARNINGS
T he appliance is equipped with a cooling fan. If a drawer is set under the recessed hob, a suitable
distance must be ensured between the contents of the drawer and the lower part of the unit, in
order to avoid compromising ventilation.
The worktop should be at and horizontal. The furniture should be cut to measure before
installing the appliance. Remove any chips to avoid compromising the operation of electrical
components.
Considering the ventilation of the cooktop, the following must be provided:
-a 20 mm space between the rear side of the furniture and kitchen’s wall (g.1-2).
-if the cooktop is installed above a drawer, leave a 65 mm space between the drawer and the top
of the cooktop (g.1).
Do not store small objects or sheets of paper in the drawer under the cooking hob, since such
objects may be aspirated and could break the fan, thus hindering the unit’s cooling; likewise, do not
store metal or inammable objects, which could become very hot or catch re.
I f the cooking hob is assembled behind a cabinet door, power it on only with the door left open.
Close the cabinet door only if the appliance and residual heat indicator lights are o.
I f the unit is assembled above an oven or an electric pyrolytic stovetop, it should not be operated
while the pyrolytic process is ongoing, as it can trigger the cooktop’s overheating protection.
The cooktop should not be installed above dishwashers because the steam released by the latter
may lead to faulty operation of the electronic circuit of the cooktop.
D o not make use of any steam devices, as steam can reach the appliance’s live parts and cause
a short circuit.
Non-suitable food containers
Danger of mishaps

ANWEISUNGEND WARNINGSGB
11
A ny interventions or repairs on the unit during the warranty period must be carried out solely
by the manufacturer’s authorised service centre; conversely, the warranty will be is invalidated
and terminated immediately. The manufacturer will not recognise any warranties under any
circumstances for any problems subsequently encountered.
Replace any defective or damaged parts with original spare parts: only original spare parts can
ensure compliance with safety standards.
N otice to persons with pacemakers: keep in mind that an electromagnetic eld is generated in
the immediate vicinity of the unit while it is in operation.
The possibility that the pacemaker’s operation may be aected is very remote. If in doubt, contact
the pacemaker manufacturer or your doctor.
I nduction can generate slight noise emissions, which can vary depending on the material, type of
pot and power setting selected.
When the cooktop is used frequently, the cooling fan turns itself on to protect the electronics,
generating a buzzing sound: this is perfectly normal.
Noise emissions
First usage
Use a damp cloth to clean and dry the cooktop before using it for the rst time.
It is recommended to dry the appliance after having cleaned it with a damp cloth, in order to
prevent the build-up of limescale.
W hen the unit is powered on for the rst time, odours or fumes may be generated. The odour
will diminish with each subsequent use, until it disappears altogether. Odours and any fumes are
not caused by a faulty connection or damage to the appliance, and are not hazardous to health.

FUNZIONAMENTO I OPERATION GB
12
5II94290 is equipped with electronic touch sensor buttons.
Firstswitch on the hob followed by the desired cooking zone.
Press the power button for at least 2 seconds.
All the displays will turn on.If, after a few seconds, no other button is pressed, the hob switches
itself o for safety reasons.
Press the button corresponding to the zone you want to use.
0 appears on the display, press + or - to select the desired power from 1 to P.
it is possible to activate plate warmer mode indicated by the symbol U by selecting the power level
between 0 and 1
P: indicates the Booster mode that is available on every cooking zone.To activate it, it is nec-
essary to press the + button until you reach power 9, and then press it again.This mode will remain
active for 5 minutes, after which the system switches back to power 9.
This mode is recommended to bring water to a boil faster.
If suitable cookware is not positioned or detected on the various cooking zones, the pot detection
feature will indicate this error with the symbol "u"
Therefore, place a pot with suitable for diameter and materials on the cooking zones, as indicated
in the paragraph suitable cookware.
The cooking zone will automatically switch o after 10 minutes if no pot is detected.
Press the power button.
The light of the main switch and those of the cooking zones turn o.The hob is now o. Each
cooking zone has a residual heat indicator marked with anHthat remains lit until the zones have
cooled down suciently.
Warning: burn hazard
Do not touch a cooking zone with the (H) indicator lit.
If a cooking zone remains switched on for too long at the same power level, the appliance auto-
matically turns it o and the residual heat indicator H appears.
Switch it on again as usual to restart the cooking zone.
The following table shows the maximum uninterrupted operating time for each power level:
Switching on the hob
Activation of the desired cooking zones
Pot Detection
Turning o the hob and residual heat indicators

FUNZIONAMENTO I
OPERATIONGB
13
Power operating limit in
minutes
1 520
2 402
3 318
4 260
5 212
6 170
7 139
8 113
9 90
P 5
Timer
The timer function can be set from 1 to 99 minutes on each cooking zone.
To activate the timer: select the cooking zone and set the desired power level, then press the timer
button , then press the + and/or - button of the cooking zone to set the desired minutes.
A beeping sound indicates the end of the set minutes and the cooking zone will switch o auto-
matically.To deactivate this function: select the relevant cooking zone then press the timer
button and press the - button to set the timer to zero.
The Bridge function allows to use two cooking zones simultaneously as if they were a single zone,
allowing the use of pots large enough to cover two adjacent cooking zones.
This function can be activated to join the two zones on the left and/or right of the hob.
To activate this function, press and hold down the button for the lower cooking zone of the de-
sired zone until the symbol M appears on the upper zone display; immediately press the button of
the upper zone to conrm, and immediately press (within 2 seconds) the + and/or - button (lower
zone) to set the desired power.
To deactivate the bridge function, set the power of the cooking zones to 0.
WARNING: if the bridge function is active, only one booster can be activated, and only on the cook-
ing zones that are not in Bridge mode.
The hob is equipped with a safety lock that prevents children from using it if it is inadvertently
turned on.The Child-Lock function can only be activated if the cooking zones have not been
selected.
To activate: press the power button, then simultaneously press the timer button and the - button,
a beep will conrm the activation of this function. Once the Child-Lock function is activated, the
symbol L will appear each time the hob is switched on, on the displays of each individual zone.
To deactivate the lock and access the settings of the various zones, turn the unit on using the
Child-Lock Child safety
Bridged mode

FUNZIONAMENTO I OPERATION GB
14
Power limiter
power button, and simultaneously press the timer and - buttons.
To permanently deactivate the Child-Lock function:simultaneously press the power button and
the - button, the command will emit a "beep", at this point press the timer button again to conrm.
The hob is equipped with power limiters that are able to limit its total maximum consumption: to
activate this function, rstly turn o the power supply to the hob and turn it on again; press the
timer button and, while holding it down, press the - button, the hob will emit a "beep" and, while
still holding the timer button down, press the button corresponding the cooking zone on the
bottom left.The hob will emit an additional conrmation beep and two displays will light up: the
upper one with a number from 00 to 02, the lower one with the writing C0.By pressing the button
for the cooking zone on the bottom left you can scroll through the various settings of the power
limiter, shown on the upper display according to the following order:
- 00-> limiter o, maximum consumption 11.1 kW (factory setting)
- 01-> limiter activated with maximum consumption 7.4 kW
- 02 -> limiter activated with maximum consumption 4.5 kW
Once you have chosen the desired setting, press the - button followed by the power button to
nish the procedure.
CAUTION:During this procedure do not touch any button other than those indicated!If this
happens inadvertently, disconnect the power supply and restart the selection from the beginning.

FUNZIONAMENTO I
OPERATIONGB
15
TLC
1: On/O motor
2: - motor
3: On/O
4: + motor
5: On/O light
Note: the LED on the hood indicates the various speeds: green 1st speed, orange 2nd speed, red
3rd speed and ashing red 4th speed.„If the remote control unit is changed, the appliance must be
reset to the frequency of the new unit as follows:
Initialization procedure:
1. Cut o power to the hood
2. Power the hood again
3.Within the rst 5 sec, press the light button and release it after the lights turn on (the control must be turned
on via key 3)
4. Within 5 sec, press the motor key and release it
Now you have to wait for about 10 seconds – then you can use the hood normally.
Notes: after 4 hours from the last use of a key, the hood turns o automatically.
Should there be interferences with other nearby remote controls, carry out the code change procedure.
Should it be required to replace the radio control, the frequency of the electronic system of the new radio
control must be calibrated again via the initialization procedure.
Procedure for generating a new code for the cooktop.
The radio control is supplied with default codes. If you want to generate new random codes, proceed as follows:
remove and restore power to the cooktop, within 5 seconds press simultaneously the two plus and minus keys
for at least 10 seconds; the LED will turn on, then press the two keys again (within 3 seconds). The LED ashes
three times to indicate that the operation has been completed. Once you changed the radio control you must
run again the initialization procedure.
1 2 3 4 5

FUNZIONAMENTO I CLEANING AND MAINTENANCE GB
16
CL
The cooking top must be cleaned after each use. Allow the appliance to cool before cleaning it.
Prior to cleaning the ceramic glass cooking hob, it is advisable to activate the Child Lock function,
so that the cooking top is not switched on accidentally (see Child Lock function).
Use only cleaning products specially formulated for ceramic glass cooking tops. Respect all
indications on the product packaging.
Do not use the following cleaning products, as they may cause damage to the surfaces of the
ceramic glass cooking top:
softeners or products for eliminating stains and/or rust;
dishwashing and/or dishwasher detergents;
detergents for glass;
detergents containing soda, ammonium, acids or chlorides;
any abrasive detergent, sponge or brush;
solvents;
dirt removing rubber erasers;
pointed objects;
oven or grill cleaning products;
any steam device, as steam can reach the appliance’s live parts and cause a short circuit.
To prevent damaging the cooking top frame, observe the following guidelines:
Use hot water only, with little soap;
Never use pointed utensils or abrasive products;
Do use a window scraping tool.
Any cooking or dirt residue should be removed with a window scraping tool. Be careful when
using scraping tools to avoid injury.
If sugar or food preparations containing sugar, plastic or aluminium foil end up on the hot cooking
top, it is advisable to switch it o. Remove these substances immediately from the cooking zone,
even if the cooking top is still hot, using a scraper; otherwise these substances can damage the
ceramic glass top when cooling down.
(Warning: burn hazard!!!) Lastly, clean the cooking zone when it has cooled.
The symbols on the cooking top can wear out as a result of using abrasive or aggressive detergents,
steel wool, and the scraping of pots and pans. Avoid using these cleaning products. In any case,
this will not in any way compromise the unit’s correct operation.
Note: all of the problem issues described in this section are solely of an aesthetic nature and do not
in any way aect the appliance’s correct operation. They cannot be restored under the warranty.
Cooking top

FUNZIONAMENTO I
CLEANING AND MAINTENANCEGB
17
HOB ERROR TABLE
These errors appear on the hob display.
Error code Description Possible causes Solution
C, E, C ashing, E ashing
or symbol -
If the display of a cook-
ing zone shows one of
these symbols, you have
intervened or you are
intervening in the basic
system congurations.
Problems or changes to
the basic system cong-
urations detected.
Contact technical sup-
port specifying the error
code.
E2 Excessive temperature of
the cooking zone.
Pot overheating. Cool the system down
by reducing power or re-
moving the pot.*
E3 Malfunction due to the
use of pots made of an
unsuitable material.
Pots of made of unsuita-
ble material or possible
loss of their magnetic
properties as the tem-
perature rises.
Use pots of made of a
suitable material or re-
place them.*
E4, E5, E6, E7, E8, E9, EA,
EC, EH,
Hardware fault Hardware errors detect-
ed
Contact technical sup-
port specifying the error
code.
No display / Function Voltage or touch control
error.
Faulty electrical con-
nection or component
failure.
Contact technical sup-
port specifying the error
code.
u Pot not detected Pot not suitable Use a suitable pot.Refer
to the paragraph suita-
ble pots. *
Er31, Er47, Er22, Er20,
Er36, Er40, U400
or display segments that
light up in sequence
Touch control fault Error detected in the
touch control
Contact technical sup-
port specifying the error
code.
Er 03 o
Continuous activation of
one of the buttons, the
control switches o after
10 seconds.
Liquid or pot on the con-
trol area
Dry and clean the glass
or remove the pot from
the control area.
The power returns to
level 0
Fault detected in a hard-
ware component
Contact technical sup-
port specifying the error
code.
L No error!
Child-Lock activated
Deactivate the Child-
Lock by referring to the
appropriate paragraph.

FUNZIONAMENTO I CLEANING AND MAINTENANCE GB
18
Er21 Excessive tempera-
ture
Appliance overheat-
ing
Let the appliance
cool down, if it does
not solve the issue,
contact technical sup-
port. *
*If the error persists, contact the authorised technical support centre specifying the
error code.

Service
www.blaupunkt-einbaugeraete.com
1800 252 878 658
Australia
[email protected]