Blaupunkt BTS10 User manual

BTS10
Instrukcja obsługi
Owner's Manual
Głośnik Bluetooth
Bluetooth speaker

BTS10
IMPORTANT SAFETY INSTRUCTIONS
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or
moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
Explanation Of Graphical Symbols:
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an
electric shock to a person or persons.
CAUTION
1

BTS10
The exclamation point within an equilateral triangle is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the product.
To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read
this manual carefully before attempting to operate this product. This will assure you years of trouble free
performance and listening pleasure.
Important Notes
2
On top of other stereo equipment that radiate too much heat.
Blocking ventilation or in a dusty area.
Places exposed to direct sunlight or close to radiators.
Do not install the product in the following areas:
bathroom.
The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a
This safety and operating instruction should be retained for future reference.
•
•

BTS10
Areas where there is constant vibration.
Do not place near candles or other naked flames.
Before turning on the power for the first time, make sure the power adaptor is properly connected.
Humid or moist places.
•
Operate the product only as instructed in this manual.
•
3
F or safety reasons, do not remove any covers or attempt to gain access to t h e i nside of the product. Refer any servicing
to qualified personnel. Do not attempt to remove any screws, or open the casing of the unit; there a r e n o user
serviceable parts inside. Refer all servicing to qualified service personnel.
SAFETY INSTRUCTIONS
1. Read Instructions- All the safety and operationg instructions must be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions- All operating and users’instructions should be followed.
•

BTS10
5. Installation- Install in accordance with the manufacture’s instructions.
6. Power sources- This product should be operated only from the type of power source indicated by the marking
adjacent to the power cord entry. If you are not sure of the type of power supply to you home, consult your product
dealer or local power company.
7. Grounding or polarization- the product is not required to be grounded. Ensure that the plug is fully inserted into
the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are
equipped with a power cord fitted with a polarized alternating line plug(a plug having one blade wider than the
other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply
cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate
molded plugs and carry safety approval appropriate to the country of use.
8. Power cord protection- Power-supply cords should be routed so that they are not likely to be walked on, kinked or
pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the
point where they exit from the product. 4

BTS10
9. Overloading- Do not overload wall outlets, extension cords, or multiple sockets, as this can result in a risk
of fire or electric shock.
10. Ventilation- The product must be properly ventilated. Do not place the product on a bed, sofa, or other
similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat- The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
12. Water and moisture- To reduce the risk of fire or electric shock, do not expose the product to train,
dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near
water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a
swimming pool(or similar).
13. Object and Liquid Entry- Never push objects of any kind into this product through openings, as they may touch
dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product. Do not place any object containing liquid on top of the product.
5

BTS10
14. Cleaning- Unplug the product from the wall outlet before cleaning. Dust in the woofer may be cleaned with a dry
cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful
not to damage the drive units.
15. Attachments- Do not use attachments not recommended by the product manufacturer, as they may cause hazards.
16. Accessories- Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall.
causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.
17. Moving the product- A product and cart combination should be moved with care. Quick stops, excessive force
and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods- The power cord of the appliance should be unplugged from the outlet during lightning storms
or when the apparatus is left unused for a long period of time.
19. Servicing-Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
6

BTS10
20. Please remove the power plug form the main power source or wall power source when not in use. When plugged
in to a power source, the system is in sandby mode, so the power is not entirely cut off.
21. Replacement parts- When replacement parts are required, ensure that the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses- For continued protection against fire hazard, use fuses only of the correct type and rating. The
correct fuse specification for each voltage range is marked on the product.
23. Do not turn up volume while listening to a section with very low level inputs or no audio signals. If you do, the
speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord
from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely
accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 35°C.
7

BTS10
27. ESD hints- The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so,
simply reset the product to resume normal operation by following the instruction manual. In case the function could
not resume, please use the product in other location.
28. Battery
1). The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
2). The batteries should be drawn to the environmental aspects of battery disposal.
3). Battery usage CAUTION-to prevent battery leakage which may result in body injuries, property damage, or
damage, or damage to the apparatus:
- Install all batteries correctly, + and- as marked on the apparatus.
- Do not mix batteries ( old and new or carbon and alkaline, etc.)
- Remove batteries when the unit is not used for a long time.
ERP2- ( Energy Related Produces) note
This product with ecodesign complies with the stage 2 requirements of Commission Regulation( EC) NO.1275/2008
8