Blaupunkt BPS004BTS User manual

12
Note: Specifications are subject to change for improvements.
SPECIFICATIONS WIRELESS OPERATION GUIDE
1
1.Power Supply.................................................................... AC 230V/50Hz
2.Total Power Consumption......................................................................100W
3.Subwoofer Power Output ........................................................................50W
4.Soundbar Power Output ....................................................................2 x 25W
5.Input Sensitivity (Subwoofer).................................................300mV 20mV
6.Input Sensitivity (Soundbar)...................................................750mV 50mV
7.Speaker Impedance (Subwoofer)..........................................................8 Ohm
8.Speaker Impedance (Soundbar)............................................................8 Ohm
9.S/N (AWeight)........................................................................................80dB
10.THD (1kHz, 1W)...................................................................................0.5%
11.Frequency Response(Subwoofer)...................................30Hz~150Hz 3dB
12.Frequency Response (Soundbar).................................200Hz~20KHz 3dB
13.L/R Separation (1kHz)..........................................................................30dB
14.L/R Balance (Stereo)........................................................................... 2dB
...... If the subwoofer is not linking properly with the soundbar or there is no
sound coming from the subwoofer please follow the below steps:
1) Switch off the soundbar and subwoofer.
3) Please repeat the above steps if the soundbar is not connecting to the
subwoofer wirelessly.
4) Once the above steps have been completed and the soundbar is
connected to the subwoofer the settings will automatically save and there
should be no need to follow the above steps again unless the product is
disconnected from the mains power.
2) Switch on the soundbar and then press the "STANDBY" button on the
remote control, this will put the soundbar into play-mode. Within 10
seconds you will need to switch on the subwoofer. Please wait a further
15 seconds while the coding is completed for the subwoofer to connect to
the soundbar wirelessly. (You can confirm this by the blue light on the front
of the subwoofer. If the soundbar and subwoofer are connected the blue
light will be solid but if it is flashing then the subwoofer is not wirelessly
connected to the soundbar).

CAUTION !
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY INFORMATION
THE LIGHTNING FLASH WITHARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED
TOALERT THE USER TO THE PRESENCE OF
UNINSULATED, "DANGEROUS VOLTAGE", WITH IN THE
PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE ARISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTE-
NANCE (SERVICING) INSTRUCTIONS IN THE LITERA-
TURE ACCOMPANYING THE APPLIANCE.
Safety Precautions
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE.
2
G. SelectionBluetooth
OPERATION
11
E. MUTE Selection
1.Press the MUTE button on the remote controller once to keep the
performance silent.
1.Press the RESET button on the remote control and it will reset all settings
including main unit output, Sound bar output to factory default settings.
F. RESET
1.Please press the 'INPUT' Button on the remote control, the speaker
will then display 'BT' on the front display which means Bluetooth
mode has been selected. Please use any Bluetooth capable device to
connectwith theBPS004BTS.A sound will be made from the soundbar
when your Bluetooth capable device is connected to the BPS004BTS.

10
Caution: Please read carefully all the following important safeguards to en-
sure safe operation.
1. Read Instructions - All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Follow Instructions - All operating instructions should be followed.
4. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
5. Power Source - The appliance should be connected to a power supply
only of the type specified in the operating instructions or as marked on
the appliance.
6. Power-cord Protection - Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
7. Water and Moisture - The appliance should not be used near water
(for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool, etc.)
8.Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. Do not use the
appliance on a bed, sofa, rug or similar surface that may block the
ventilation openings.
IMPORTANT SAFEGUARDS
3
A. Switch On/Off the Product
2. Connect AC power supply with this product.
(Caution: Power source must be consistent with this product.)
3. Press onthe POWER switchbutton onthe RearPanel of themainunittoswitch
on the system, the standby indicator will light up. Then press the
STANDBYbutton on the remote controller to enter the normal status. Press
the button on the remote controller once again to keep power in standby
status.
B. VOLUME Selection
1.Press the VOL+ on the front panel of the main ubutton nit or VOL +
button on the remote controller to maximize the sound output.
2. Press the VOL- on the front panel of the mainbutton unit or VOL -
button on the remote controller to minimize the sound output.
OPERATION
C. TREBLE Selection
1.Press the TREBLE + button on the remote control to increase the treble
level.
2.Press the TREBLE - button on the remote control to decrease the treble
level.
D. BASS Selection
1.Press the BASS + button on the remote control to increase the bass level.
2.Press the BASS - button on the remote control to decrease the bass level.
1.Before turning on the system, please follow the previous instructions to
setup the units connections.

SYSTEM CONNECTION INSTRUCTIONS
TV
Video In
Video Out
Rear -R
Cent er
Woof er Rear -L Fron t-L
Fron t-R
DVD Player
Optical
Audio Out
Rear-R
Center
Woofer Re ar-L Front-L
Coaxial F ront-R
Video Out Scart out
Video S-Vi deo UVY
Manufacturedunder license from Dolby Laboratories.
"Doldy","DolbyDigital", and the double-D symbol are
trademarksof Dolby Laboratories. Confidential
UnpublishedWorks.
@1992-1997Dolby Laboratories, Inc.
Allrights reserved.
Apparatus Claimsof U.S. PatentNos.
4,631,603;4,577,216;4,819,098and 4,907,093
licensed forlimitedviewinguses only.
RISKOF ELECTRIC SHOCK
DO NOT OPE N
WARNIN G !AC100V~240V
50/60Hz
Video
RCA Cable
To Stereo Output
Audio Out
registers, stoves, or other appliances (including amplifiers) that produce heat.
10. Nonuse Periods - The power cord of the appliance should be unplugged
from the outlet when left unused for a long period of time.
11. Damage requiring service - The appliance should be serviced by qualified
service personnel when:
a/ The power-supply cord or the plug has been damaged;
b/ Objects have fallen or liquid has been spilled into the appliance;
c/ The appliance has been exposed to rain;
d/ The appliance does not appear to operate normally or exhibits a marked
change in performance;
e/ The appliance has been dropped, or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond
that specified in the operating instructions. All other servicing should be
referred to qualified service personnel.
13. Clean only with dry cloth.
14. Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult and electrician for replacement of the
obsolete outlet.
15. Unplug this apparatus during lightning storms or when unused for
long periods of time.
9. Heat - Keep the appliance away from heat sources such as radiators, heat
IMPORTANT SAFEGUARDS
49

REMOTE CONTROL
8
FRONT PANEL - CONTROLS AND FUNCTIONS
5
1. : Power Standby.STANDBY
6.VOL-: Volume Downward Adjustment Button.
9.INPUT: Input Button .Selection
2.MUSIC: Music Mode .Selection
3.NORMAL: Normal Mode .Selection
7.BASS-: Bass Downward Adjustment Button.
8.TREBLE-: Treble Downward Adjustment Button.
11.RESET: Reset sound settings to default.
12.MOVIE: Movie Mode .Selection
10.MUTE: Mute Function Button .
4.PREV.
5.NEXT.
15.VOL+: Volume Upward Adjustment Button.
16.BASS+: Bass Upward Adjustment Button.
17.TREBLE+: Treble Upward Adjustment Button.
14.PLAY and PAUSE.
1.Replace the remote control battery when it no longer operates the
unit, or the range is reduced considerably.
2.Use only Cr2025 3V lithium batteries
3.Bear in mind that lighting & other room conditions, in addition to
battery age, can affect the operating range of an infrared remote control.
REMOTE CONTROL BATTERY REPLACEMENT
5.STANDBY:Subwoofer Standby
Input Indicator.
2. Remote Sensor.
1 2
1. LED Display.
43
3.Power On/Off Switch.
4.AC Power Cord.
5
MadeIn China
BLAUPUNKTWARRANTY 1300 055 518
2.4GHzDIGITAL WIRELESS SOUNDBAR SYSTEM
MaxTotal Power Consumption:100W
OutputPower: Sound bar:25W x 2
Subwoofer:50W x 1
PowerSupply: AC 230V~50Hz
SpeakerUnit :Sound bar : 2
Subwoofer: 5.25 x1
Impedance :Sound bar : 4( )
Subwoofer: 8( )
x 4
Ω
Ω
BPS004BTS
13.BT ESC: Bluetooth Secede (in the connected state)

BPS004BTS
REAR PANEL - CONTROLSAND FUNCTIONS
76
2. AUX Stereo Audio Input.Right
1. AUX Stereo Audio Input.Left
REAR PANEL - CONTROLSAND FUNCTIONS
4. OPTICALAudio Input.
3. COAXIALAudio Input.
5. AC Power Cord.( )SUBWOOFER
6. Power On/Off Switch.(SUBWOOFER)
6
REMOTE CONTROL
11
12
2
3
4
7
8
9
10
1
14
15
16
5
6
13
1 2
3
4
5
Mad e In Chin a
BLA UPUNK T WARRAN TY 1300 0 55 518
2.4 GHz DIG ITAL WIRE LESS SO UNDBA R SYSTE M
Max Tot al Powe r Consu mptio n:100 W
Out put Pow er: Sou nd bar: 25W x 2
Sub woofe r :50W x 1
Pow er Supp ly: AC 230 V~50H z
Spe aker Un it : So und bar : 2
Sub woofe r : 5.25 x 1
Impedance : Sou nd bar : 4( )
Sub woofe r : 8( )
x 4
Ω
Ω
BPS004BTS
17
MadeIn China
BLAUPUNKTWARRANTY 1300 055 518
2.4GHzDIGITAL WIRELESS SOUNDBAR SYSTEM
MaxTotal Power Consumption:100W
OutputPower: Sound bar:25W x 2
Subwoofer:50W x 1
PowerSupply: AC 230V~50Hz
SpeakerUnit :Sound bar : 2
Subwoofer: 5.25 x1
Impedance :Sound bar : 4( )
Subwoofer: 8( )
x 4
Ω
Ω
BPS004BTS