Blomberg LDV42124 User manual

www.blomberginternational.com
[email protected]
Dishwasher
User manual
LDV42124

Dishwasher
User manual
LDV42124

Explanation of symbols
Throughout this User Manual the following symbols are used:
CImportant information or
useful hints about usage.
AWarning for hazardous
situations with regard to life
and property.
BWarning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the dome󰀬ic or other
wa󰀬es. Take them to the packaging material collection points designated by the
local authorities.
󰀬
Dear Cu󰀬omer,
We hope that you get the be󰀬 results from your product which has been
manufactured with high quality and 󰀬ate-of-the-art technology. Therefore,
please read this entire user manual and all other accompanying documents
carefully before using the product and keep it as a reference for future use. If
you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models.
Di󰀨erences between models will be identied in the manual.

CONTENTS
1 INSTRUCTIONS
FOR SAFETY AND
ENVIRONMENT 4
General safety ...........................................4
Intended use..............................................5
Children’s safety ........................................5
Disposing of packaging material................5
Transportation of the product ....................5
Compliance with WEEE Directive and
Disposing of the Wa󰀬e Product ................6
Compliance with RoHS Directive...............6
Package information..................................6
2 DISHWASHER 7
Overview....................................................7
Fan drying sy󰀬em .....................................8
Technical specications .............................8
3 INSTALLATION 9
Appropriate in󰀬allation location.................9
Connecting water supply ...........................9
aquAvoid™ plus .....................................10
Connection to the drain ...........................10
Adju󰀬ing the feet.....................................10
Electrical connection................................11
This appliance mu󰀬 be earthed ..............11
Fitting a di󰀨erent plug ..............................12
Initial use .................................................12
4 PREPARATION 13
Tips for energy saving .............................13
Water softening sy󰀬em ...........................13
Adju󰀬ing the water softening sy󰀬em ......13
Adding salt...............................................15
Detergent.................................................16
Tablet detergents .....................................17
Rinse aid..................................................18
Items not suitable for washing in the
dishwasher ..............................................18
Placing the dishes into the dishwasher ...19
Adju󰀬ing the height of the upper basket .21
Upper basket multipurpose service rack .22
Collapsible upper basket wires................22
Collapsible lower basket tines .................23
Upper basket height adju󰀬able rack .......23
Tray Wash Supports ................................24
Cutlery basket .........................................24
5 OPERATING THE
PRODUCT 25
Keys.........................................................26
Function keys ..........................................26
Preparing the machine ............................26
Programme selection...............................26
Auxiliary functions....................................28
Scheduling the washing time...................29
Starting the programme...........................30
Cancelling the programme ......................30
Adju󰀬ing the amount of rinse aid ............31
Salt indicator ( ) ...................................31
Rinse Aid indicator ( )...........................31
End of programme...................................31
ProCare ...................................................32
Water cut-o󰀨 warning...............................32
Overowing warning................................32
6 MAINTENANCE AND
CLEANING 33
Cleaning the outer surface of the product33
Cleaning the interior of the machine........33
Cleaning the lters...................................33
Cleaning the hose lter............................34
Cleaning the impellers.............................35
Lower impeller .........................................35
Upper impeller ........................................35
7 TROUBLESHOOTING 36
8 GUARANTEE 41
Guarantee Details....................................41

4Dishwasher / User manual /45 EN
󰀬
1
This section contains safety
in󰀬ructions that will help to
give protection from risk of
personal injury or property
damage. Failure to follow
these in󰀬ructions shall void all
warranties.

• Never place the product
on a carpet-covered oor;
otherwise, lack of airow
beneath the product will
cause electrical parts
to overheat. This will
cause problems with your
product.
• Do not operate the product
if the power cable / plug
is damaged! Call the
Authorised Service Agent.
• Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specications” table. Do
not neglect to have the
grounding in󰀬allation
made by a qualied
electrician. Our company
shall not be liable for any
damages that will arise
when the product is used
without grounding in
accordance with the local
regulations.
• The water supply and
draining hoses mu󰀬 be
securely fa󰀬ened and
remain undamaged.
• Unplug the product when
not in use.
• Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
• Never touch the plug with
wet hands! Never unplug
by pulling on the cable,
always pull out by grabbing
the plug.
• The product mu󰀬
be unplugged during
in󰀬allation, maintenance,
cleaning and repairing
procedures.
• Always have the repair
procedures carried out by
the Authorised Service
Agent. Manufacturer
shall not be held liable for
damages that may arise
from procedures carried
out by unauthorised
persons.
• Never use chemical
solvents in the product.
They bring forth the risk of
explosion.
• When you pull the upper
and lower baskets out
completely, the door of
the product will bear all
the weight of the baskets.
Do not put other loads on
the door; otherwise, the
product may tilt.
• Never leave the door of
the product open apart
from loading and unloading
procedures.
• Do not to open the door
of the product when it is
running unless necessary.
Be careful for the rush of
hot 󰀬eam when you need
to open the door.

Dishwasher / User manual 5/ 45 EN
In󰀬ructions for safety and envIronment
Intended use
• This product has been
designed for dome󰀬ic use.
• It mu󰀬 be used to do the
dome󰀬ic type dishes only.
• This appliance is intended
to be used in household
and similar applications
such as:
- Sta󰀨 kitchen areas in shops,
o󰀩ces and other working
environments.
• Only dishwasher safe
detergents, rinse aids and
additives mu󰀬 be used.
• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical,sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
in󰀬ruction concerning use
of the appliance in a safe
way and under󰀬and the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
without supervision.

• Electrical products are
dangerous for the children.
Keep children away from
the product when it is in
use. Do not let them to
tamper with the product.
• Do not forget to close the
door of the product when
leaving the room where it
is located.
• Store all detergents and
additives in a safe place
away from the reach of the
children.


Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured
from recyclable materials.
Dispose of them properly
and sort in accordance with
recycled wa󰀬e in󰀬ructions.
Do not dispose of them with
normal dome󰀬ic wa󰀬e.


AIf you need to move
the product, do it
in upright position
and hold from the
rear side. Tilting the
product onto its front
side may cause the
electronic parts in it
get wet and damaged.

6Dishwasher / User manual /45 EN
In󰀬ructions for safety and envIronment
1. Unplug the product before
transporting it.
2. Remove water drainage
and water supply
connections.
3. Drain the remaining water
in the product completely.


󰀬
This product complies
with EU WEEE Directive
(2012/19/EU). This
product bears a
classication symbol for wa󰀬e
electrical and electronic
equipment (WEEE).This
product has been
manufactured with high quality
parts and materials which can
be reused and are suitable for
recycling. Do not dispose of
the wa󰀬e product with normal
dome󰀬ic and other wa󰀬es at
the end of its service life. Take
it to the collection center for
the recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.


The product you have
purchased complies with EU
RoHS Directive (2011/65/EU).
It does not contain harmful and
prohibited materials specied
in the Directive.

Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
dome󰀬ic or other wa󰀬es.
Take them to the packaging
material collection points
designated by the local
authorities.

Dishwasher / User manual 7/ 45 EN
Dishwasher
2

15
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket
5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket (depends on model)
14. Tabletop (depends on model)
15. Fan drying sy󰀬em (depends on model)

8Dishwasher / User manual /45 EN
Dishwasher

󰀬󰀬
This product complies with the following EU directives;
Development, production and sales 󰀬ages of this product comply with the
safety rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
CTechnical specications may be changed without prior notice to improve
the quality of the product.
CFigures in this manual are schematic and may not match the product
exactly.
CValues 󰀬ated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of
the relevant 󰀬andards. Depending on operational and environmental
conditions of the product, these values may vary.

Data required for performance te󰀬s shall be provided upon reque󰀬. Reque󰀬s can
be e-mailed to the following address:

Do not forget to provide the code, 󰀬ock and serial numbers of the product to be
te󰀬ed in your reque󰀬 e-mail along with your contact information. Code, 󰀬ock and
serial numbers of the product may be found on the type label attached to the side
wall of the door.
󰀬
Fan drying sy󰀬em ensures e󰀩cient drying of your dishes.
It is normal to hear a di󰀨erent sound than that of washing cycle during fan
operation.

Dishwasher / User manual 9/ 45 EN
3󰀬
To make the product ready for use,
make sure that the electricity, tap
water supply and water drainage
sy󰀬ems are appropriate before calling
the Authorised Service Agent. If they
are not, call a qualied technician
and plumber to have any necessary
arrangements carried out.
CPreparation of the location
and electrical, tap water and
wa󰀬e water in󰀬allations
at the place of in󰀬allation
is under cu󰀬omer's
responsibility.
BManufacturer shall not
be held responsible for
damages arising from
processes carried out by
unauthorised persons.
APrior to in󰀬allation, visually
check if the product has any
defects on it. If so, do not
have it in󰀬alled. Damaged
products cause risks for your
safety.
CMake sure that the water
inlet and discharge hoses
are not folded, pinched or
crushed while pushing the
product into its place after
in󰀬allation or cleaning
procedures.
When placing the product, pay attention
not to damage the oor, walls, piping,
etc. Do not hold the product from its
door or panel to move it.
󰀬

• Place the product on a solid and
at oor that has su󰀩cient load
carrying capacity! The product
mu󰀬 be in󰀬alled on a at surface
in order for the door to be closed
comfortably and securely.
• Do not in󰀬all the product at places
where temperature may fall below
0ºC.
• Place the product on a rigid oor.
Do not place it on a long pile rug or
similar surfaces.
BEnsure the power cable does
not get trapped under the
product.
• Make sure that you select a
location that will allow you to load
and unload the dishes in a fa󰀬 and
comfortable manner.
• In󰀬all the product in a place close
to the tap and the drain. Select the
in󰀬allation location by considering
that it will not be changed after the
connections are made.

• Do not use old or used water inlet
hose on the new product. Use the
new water inlet hose supplied with
the product.
• Connect the water inlet hose
directly to the cold water tap.
Permitted water temperature up
to 25°C. Pressure coming from
the tap should be minimum 0.3
and maximum 10 bars. If the
water pressure exceeds 10 bars,
a pressure relief valve should be
in󰀬alled in between.
• Open the tap completely after
making the connections to check
for water leaks.

10 Dishwasher / User manual /45 EN
In󰀬allation
AFor your safety, close the
water inlet tap completely
after the washing programme
is over.

Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
mu󰀬 be min. 50 cm and max. 100 cm
from the oor. A discharge hose longer
than 4 meters will cause washing
performance to be a󰀨ected.Attach the
water discharge hose to the drainpipe
without bending it. Tightly x the water
discharge hose to the drainpipe in order
to prevent any dislocation of the water
discharge hose during operation of the
product.
min 300
min 120
max 1000
min 500

The aquAvoid™ plus sy󰀬em protects
again󰀬 water leaks that may occur
at the hose inlet.Water contact with
the valve box of the sy󰀬em mu󰀬 be
avoided to prevent damage to the
electrical sy󰀬em. If the aquAvoid™ plus
sy󰀬em is damaged, unplug the product
and call the Authorised Service Agent.
AAs the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
󰀬
If the door of the product cannot
be closed properly or if the product
wobbles when you push it slightly,
then you need to adju󰀬 the feet of the
product. Adju󰀬 the feet of the product
as illu󰀬rated in the relevant section.
ADiswashers door mu󰀬 be
aligned properly otherwise
hot 󰀬eam can escape!
Danger of serious burns,
other injury or may damage
furniture.
CDrainpipe mu󰀬 be connected
to the foul water sy󰀬em and
it should not be connected to
any surface water drain.

Dishwasher / User manual 11/45 EN
In󰀬allation
A󰀬
be earthed
If the tted moulded plug is
not suitable for your socket,
then the plug should be cut
o󰀨 and an appropriate plug
tted.
De󰀬roy the old plug, which
is cut o󰀨 as a plug with a
bared cord could cause a
shock hazard if inserted into
a socket elsewhere in the
house.
The moulded plug on this
appliance incorporates a
13A fuse. Should the fuse
need to be replaced an ASTA
approved BS1362 fuse of
the same rating mu󰀬 be
used. Do not forget to ret
the fuse cover. In the event
of losing the fuse cover, the
plug mu󰀬 not be used until
a replacement fuse cover
has been tted. Colour of
the replacement fuse cover
mu󰀬 be the same colour as
that visible on the pin face
of the plug. Fuse covers
are available from any good
electrical 󰀬ore.

Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
If the supply cord or the mains lead
is damaged please do not replace it
yourself. The supply cord or the mains
lead mu󰀬 be replaced by a Authorised
Service Agent or a similarly qualied
person.

12 Dishwasher / User manual /45 EN
In󰀬allation
󰀨
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
1. Connect the green - yellow or
green (earth) wire to the terminal
in the plug marked ‘E’ or with the
symbol or coloured green
and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’
or coloured black.
3. Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.







With the alternative plugs a 13A fuse
mu󰀬 be tted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualied electrician.

Before 󰀬arting to use the product, make
sure that all preparations are made
in accordance with the in󰀬ructions in
sections “Important safety in󰀬ructions”
and “In󰀬allation”.
• Before using the product, ll the
salt reservoir with 1 litre of water,
add salt (see next page) and 󰀬ir
to dissolve. Run the Dishwasher
without dishes on a short
programme with a small amount of
detergent.
AThere might be a small
amount of water left in the
product after factory quality
control te󰀬s. This causes no
harm to the product.

Dishwasher / User manual 13/45 EN

4

Following information will help you use
the product in an ecological and energy-
e󰀩cient manner.
Wipe away any coarse food remnants
on the dishes before putting them in the
product.
Operate the product after lling it
completely.
When selecting a programme, consider
the table of "Programme data and
average consumption values".
Do not put more detergent than
sugge󰀬ed on the detergent package.
󰀬
The product is equipped with a water
softening sy󰀬em which reduces the
hardness of incoming water. This
sy󰀬em softens the supply water to a
level that will allow washing the dishes
with the required quality.
CThe mains water hardness
mu󰀬 be softened if it is
over 7°dH. Otherwise,
hardness ions will accumulate
on the dishes that are
washed and may a󰀨ect the
washing, rinsing and drying
performances of the machine.
󰀬
󰀬
Cleaning, rinsing and drying
performance of your dishwasher will
increase when water softening sy󰀬em
is adju󰀬ed properly.
Adju󰀬 the new water hardness level
according to the Water hardness level
in󰀬ruction in this booklet.
Use the te󰀬 󰀬rip supplied with the
product according to the 󰀬eps given
below to determine hardness level of
your supply water.

14 Dishwasher / User manual /45 EN
In󰀬allation
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adju󰀬 water hardness level according to the hardness of
the supply water. See “Water hardness level adju󰀬ment table” for correct setting.
4. Press On / O󰀨 key to save the setting.

Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
0th Level 0-5 0-4 0-8 Press the Time Delay key to switch the water hardness level
to position 1. (r1)
1st Level 6-9 5-7 9-13
2nd Level 10-15 8-12 14-22 Press the Time Delay key to switch the water hardness level
to position 2. (r2)
3rd Level 16-19 13-15 23-27 Press the Time Delay key to switch the water hardness level
to position 3. (r3)
4th Level 20-24 16-19 28-34 Press the Time Delay key to switch the water hardness level
to position 4. (r4)
5th Level 25-62 20-50 35-90 Press the Time Delay key to switch the water hardness level
to position 5. (r5)
If the hardness level of the supply water is above 90 °dF or if you are using well
water, then it is recommended to use water purication devices and special lters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt
in your dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates
continuously on the panel of your machine.
If the water hardness level adju󰀬ment is set to level 1, the “No salt warning
indicator” will illuminate continuously although it is not necessary to use salt. If you
use salt under this condition, salt will not be consumed and the Salt indicator will not
illuminate.

Dishwasher / User manual 15/45 EN
Preparation
CIf you move your house,
it is necessary to readju󰀬
water hardness level of your
machine by considering the
information given above
according to the hardness
level of the supply water
in your new location. Your
machine will display the
mo󰀬 recently adju󰀬ed water
hardness level.

Water softening sy󰀬em needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used
for this purpose.
CUse only special softening
salts produced particularly
for the dishwashers in your
machine.
CIt is recommended to
use granule- or powder-
formed softening salts in
the water softening sy󰀬em.
Do not use salts that do
not completely dissolve in
water such as table salt or
rock salt. Otherwise the
performance of the sy󰀬em
may deteriorate in time.
CSalt reservoir will be lled
with water when you 󰀬art
the product. For this reason,
add salt before operating the
machine.
1. Firstly, take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 litre of water to salt reservoir
of your machine only in initial use.
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed
up dissolution rate of salt in water,
stir it with a spoon.
CYou can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when
the reservoir is full.
CYou need to add salt right
before 󰀬arting the machine.
Thus, the overowing
salty water will be ushed
immediately, preventing the
risk of corrosion in machine.
In cases where you would not
󰀬art washing immediately,
run your machine empty in
the shorte󰀬 program.

16 Dishwasher / User manual /45 EN
Preparation
1. Push the latch to right to open the
detergent dispenser lid (A).
2. Put suggested amount of powder,
liquid/gel or tablet detergent in the
reservoir.
CInside the detergent
dispenser there are level
markings that help you
use appropriate amount of
powder detergent. When
brimful, detergent dispenser
will contain 45 cm³ of
detergent. Fill detergent up to
15 cm³ or 25 cm³ level marks
in the detergent dispenser
according to fullness of
the machine and/or soiling
degree of the dishes. One
tablet is enough if you are
using detergent tablets.
3. Push the lid of the detergent
dispenser to close it. A "click" will be
heard when the lid is closed.
CSince di󰀨erent salt brands
in the market have di󰀨erent
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.

You can use powder, liquid/gel or tablet
detergents in the machine.
AOnly use in the machine
the detergents produced
particularly for use
with dishwashers. We
recommend you not use
detergents that contain
chlorine and phosphate
as they are harmful for the
environment.

CPay attention to the warnings
on the detergent packaging
to get better washing and
drying results. Contact the
manufacturer of the detergent
for further que󰀬ions.
ADo not put solvents into the
detergent dispenser. There is
the risk of explosion!
Put the detergent into the detergent
dispenser ju󰀬 before operating the
machine as illu󰀬rated below.

Dishwasher / User manual 17/45 EN
Preparation
CThe be󰀬 washing
performance in dishwashers
is obtained by using
detergent, rinse aid and water
softening salt individually.
CObserve the in󰀬ructions of
the detergent manufacturer
on the package when using
tablet detergents.
CContact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly
on your glasses after the
washing programme is
over when using a tablet
detergent.


1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level so
as to suit the water supply.
4. Make the appropriate rinse aid
settings.
1
2
3
CUse powder or liquid/
gel detergent in short
programmes without
prewash since the solubility
of the tablet detergent
changes depending on the
temperature and time.

In addition to the conventional tablet
detergents, there are also commercially
available detergent tablets that show
water softening salt and/or rinse aid
e󰀨ect. Some types of these detergents
contain special-purpose components
such as glass and 󰀬ainless 󰀬eel
protectors. These tablets show their
e󰀨ects up to a certain water hardness
level (21°dH). Water softening salt and
rinse aid mu󰀬 also be used together
with the detergent if the water hardness
level is above the mentioned level.

18 Dishwasher / User manual /45 EN
Preparation
4. If there are stains on tableware
items after washing, level must be
increased and if there is a blue trace
after wiping them by hand, it must
be decreased. This is set to position
3 as factory default.
CThe rinse aid adju󰀬ment is
described under "Adju󰀬ing
the amount of rinse aid" in
the section for operating the
machine.
CWipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.


• Never wash dishes soiled by
cigarette ash, candle remnants,
polish, dye󰀬u󰀨, chemicals, etc. in
your dishwasher.
• Do not wash silverware and cutlery
with wooden or bone 󰀬ems, glued
pieces, or pieces that are not
resi󰀬ant to heat, as well as copper
and tin-plated containers in the
dishwasher.

CThe rinse aid used in
dishwashers is a special
combination that aims to
increase drying e󰀩ciency and
prevent water or lime 󰀬ains
on the washed items. For this
reason, care mu󰀬 be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
1. Open the lid of the rinse aid
reservoir with the help of the latch.
2. Fill the reservoir until “MAX” level.
3. Slightly press the point (B) of the
reservoir lid to close it.

Dishwasher / User manual 19/45 EN
Preparation
CDecorative prints of
chinaware as well as
aluminium and silver items
may get discoloured or
tarnished after washing in
the dishwasher ju󰀬 as it
happens in handwashing as
well. Some delicate glass
types and cry󰀬als may
become dull in time. We
󰀬rongly recommend you
to check if the tableware
you are going to purchase
is suitable for washing
especially in the dishwasher.


You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the
dishes in an orderly way.
• Wipe away any coarse food
remnants (bones, seeds, etc.) on
the dishes before placing them in
the dishwasher.
• Place thin, narrow pieces in the
middle sections of baskets if
possible.
• Place the heavily soiled and bigger
items in the lower basket and
smaller, delicate and light items in
the upper basket.
• Place the hollowed dishes such as
bowls, glasses and pans upside
down in the dishwasher. Thus,
accumulation of water in deep
hollows is prevented.
ATo prevent possible injuries,
always place the sharp and
pointed dishes such as
service fork, bread knife,
etc. upside down so as their
pointed ends will face down
or they will lie horizontally in
the dish basket.
Unload dishes in the lower basket r󰀬
and then the dishes in the upper basket.