Blomberg DHP 24400W Instruction Manual

To prevent accidents and/or machine
damage, read these instructions before
installation or use. Use the dryer only
as instructed in this owner’s guide and
installation instructions manual included
with your dryer. Keep this guide for future
reference
DHP 24400W
DHP 24412W
Owner’s Guide & Installation Instructions
Front-Loading Dryer

2960311018_EN/210515.0939
Please read this user manual first!
Dear Customer,
Thank you for prefering a Blomberg product. We hope that your product which has been manufactured with high
quality and technology will give you the best results. We advise you to read through this manual and the other
accompanying documentation carefully before using your product and keep it for future reference. If you transfer
the product to someone else, give its manual as well. Pay attention to all details and warnings specified in the user
manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Explanation of symbols
Throughout this user manual the following symbols are used:
CImportant information or useful hints about
usage.
AWarning for hazardous situations with
regard to life and property.
BWarning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated
collection points designated by the local authorities.

1 Important Safety Instructions 4
2 Your Dryer 8
2.1 Overview ..................................................8
2.2 Package Contents.....................................9
3 Installation Instructions 10
3.1 Electrical connection ...............................10
3.2 Grounding Instructions ............................11
3.3 Appropriate installation location ...............11
3.4 Minimum Installation Clearances..............12
3.5 Use on top of a washing machine.............12
3.6 Adjusting the feet....................................13
3.7 Destroying packaging material.................13
3.8 Connecting to the drain ...........................13
4 Preparation 14
4.1 Laundry suitable for drying in the dryer ....14
4.2 Laundry not suitable for drying in the dryer14
4.3 Preparing laundry for drying ....................14
4.4 Things to be done for energy saving.........14
4.5 Correct load capacity...............................15
5 Operating the product 16
5.1 Control panel ..........................................16
5.2 Screen symbols ......................................16
5.3 Preparing the machine ............................17
5.4 Program selection...................................17
5.5 Main programs .......................................17
5.6 Extra programs .......................................17
5.7 Program selection and consumption table 19
5.8 Auxiliary functions ...................................20
5.9 Warning symbols ....................................20
5.10 End duration.........................................20
5.11 Starting the program .............................21
5.12 Child Lock ............................................21
5.13 Changing the program after it is started .21
5.14 Canceling the program..........................21
5.15 Program end ........................................22
6 Maintenance and cleaning 23
6.1 Cleaning Lint Filter / Loading Door Inner
Surface ........................................................23
6.2 Cleaning the sensor ...............................23
6.3 Cleaning the filter drawer .......................24
6.4 Cleaning the evaporator ..........................26
7 Troubleshooting 27
TABLE OF CONTENTS

4 / 28 EN
Dryer / User Manual
1Important Safety Instructions
AWARNING: To reduce
the risk of fire, electric
shock, or personal
injury when using
this appliance, follow
the basic precautions
including the following:
• Read all instructions before using
the appliance. Otherwise, there may
be the risk of personal injury or
material damage. Additionally, any
warranty and reliability commitment
will become void.
AThis product has been
designed for home use
only.
• The appliance must be operated
at temperatures between +5°C and
+35°C.
• The appliance must not be
installed behind a lockable door,
a sliding door or a door with the
hinges on the opposite side to that
of the tumble dryer.
• Do not install or store this
appliance where it will be exposed
to weather.
• Do not tamper with the controls.
• Do not repair or replace any
part of the appliance or attempt
any servicing unless specifically
recommended in the user-
maintenance instructions or in
published user-repair instructions
that you understand and have the
skills to carry out.
• Unplug the machine when it is
not in use.
• Never wash the appliance with
water! There is the risk of electric
shock!
• Never touch the plug with wet
hands.
• Never pull from the cable to
unplug the machine.
• Do not operate the appliance if
the power cord or plug is damaged.
• Never attempt to repair the
machine yourself.
• For malfunctions that cannot
be solved by information in the
operating manual: Turn off and
unplug the appliance and call an
authorized service..
• This appliance must be
grounded. In the event of
malfunction or breakdown,
grounding will reduce the risk
of electric shock by providing
a path of least resistance for
electric current. This appliance is
equipped with a cord having an
equipment-grounding conductor
and a grounded plug. The plug must
be plugged into an appropriate
outlet that is properly installed and
grounded in accordance with all
local codes and ordinances.

5 / 28 EN
Dryer / User Manual
BWARNING: Improper
connection of the
equipment-grounding
conductor can result
in a risk of electric
shock. Check with a
qualified electrician or
service representative
or personnel if you are
in doubt as to whether
the appliance is properly
grounded.
• Power cord plug must be within
easy reach after installation.
• To reduce the risk of fire or
electric shock, do not use extension
cords, multi-plugs or an adapter
to connect the dryer to electrical
mains.
• Do not modify the plug provided
with the appliance: if it will not fit
the outlet, have a proper outlet
installed by a qualified electrician.
• If the power supply cord is
damaged, it must be replaced by
the manufacturer, its service agent
or similarly qualified persons in
order to avoid an electrical hazard.
• The appliance must not be
operated unless it is repaired! There
is the risk of electric shock!
• Ventilation openings in the base
must not be obstructed by carpets,
etc.
• Exhaust air must not be
discharged into a flue used for
exhausting fumes from appliances
burning gas or other fuels.
• Adequate ventilation must
be provided to avoid the back
flow of gases into the room from
appliances burning other fuels,
including open fires.
• Do not dry articles that have
been previously cleaned in, washed
in, soaked in or spotted with
gasoline, dry-cleaning solvents
or other flammable or explosive
substances as they give off vapors
that could ignite or explode.
• Do not use the tumble dryer if
industrial chemicals have been used
for cleaning.
• Do not dry unwashed items in
the tumble dryer.
• Do not place items exposed to
cooking oils in your dryer. Items
contaminated with cooking oils may
contribute to a chemical reaction
that could cause a load to catch
fire.
• Items such as foam rubber (latex
foam), shower caps, waterproof
textiles, rubber-backed articles and
clothes or pillows fitted with foam
rubber pads should not be dried in
the tumble dryer.
• Do not use fabric softeners or
products to eliminate static unless
recommended by the manufacturer
of the fabric softener or product.
• The appliance may only be used
for the drying of textiles that are
marked accordingly.
• Undergarments that contain
metal reinforcements should not be
placed in a tumble dryer. Damage

6 / 28 EN
Dryer / User Manual
to the tumble dryer can result if the
metal reinforcement come loose
during drying.
• Before loading check all
garments for lighters, coins, metal
pieces, needles, etc.
• Fabric softeners, or similar
products, should be used
as specified by the fabric
softener’s instructions. The use
of fabric softener sheets is not
recommended.
• The final part of a tumble dryer
cycle occurs without heat (the
cool-down cycle) to ensure that
the items are left at a temperature
that ensures the items will not be
damaged.
AWARNING: Never stop
the tumble dryer before
the end of the drying
cycle unless all items
are quickly removed
and spread out dissipate
heat.
• Do not reach into the appliance if
the drum is moving.
• Do not allow children to play
on or in the appliance.Close
supervision of children is necessary
when the appliance is used near
children.
• Young children should be
supervised to ensure that they do
not play with the appliance.
• Keep pets away from the
appliance during the drying cycle.
• Before the appliance is removed
from service or discarded, remove
the door to the drying compartment.
• Close the loading door when you
leave the area where the machine is
located.
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they are supervised or have been
given instructions concerning the
use of the appliance by a person
responsible for their safety.
• Clean lint filter before or after
each load.
• Keep area around the exhaust
vent and adjacent surrounding
areas free from the accumulation of
lint, dust, and dirt.
• The interior of the appliance
and exhaust ductwork should be
cleaned periodically by qualified
service personnel.
• Never use the dryer without the
lint filter.
• At times when your dryer is not in
use or after the laundry is taken out
following the completion of drying
process, turn off by using the On/
Off button. In cases when the On/
Off button is on (while the dryer is
energized), keep the door of the
dryer closed.

7 / 28 EN
Dryer / User Manual
• For power saving in models with
lamps, at times when your dryer is
not in use, keep the door closed if
the On/Off button is pressed (if the
dryer is energized).
SAVE THESE INSTRUCTIONS
Model Heat Pump Dryer with electronic
sensor control
Height (in) 33 1/2
Witdth (in) 23 1/2
Depth (in) 24 3/4
Height adjustment of feet (in) 1/5
Net weight (lbs) 121
Voltage / Frequency 208-240V ~ 60 Hz
Connected load 900 W - 4 A
Technical Specifications

8 / 28 EN
Dryer / User Manual
10
1
2
3
4
5
6
7
8
9
1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening tab
5. Ventilation grids
6. Adjustable feet
7. Kick plate
8. Type label
9. Lint filter
10. Power cable
2.1 Overview
2Your Dryer

9 / 28 EN
Dryer / User Manual
2.2 Package Contents
12 3 4
1. Water drain hose (2951261600)
2. Filter drawer spare sponge (2964840100)
3. User Manual (2960311018)
4. Drain connector (2828040100)

10 / 28 EN
Dryer / User Manual
3Installation Instructions
AWARNING - Risk of fire
• The clothes dryer (“appliance‘) installation must be
performed by a qualified installer.
• Install the appliance according to the
manufacturer’s instructions and local codes.
• Do not install a clothes dryer with flexible plastic
venting materials. If flexible metal (foil type) duct
is installed, it must be of a specific type identified
by the ap pliance manufacturer as suitable for use
with clothes dryers. Flexible venting materials are
known to collapse, be easily crushed, and trap lint.
These conditions will obstruct the clothes dryer’s
airflow and increase the risk of fire.
• To reduce the risk of severe injury or death,
follow all installation instructions.
3.1 Electrical connection
Connect the appliance to a grounded outlet protected by
a fuse or circuit breaker of suitable capacity.
4-wire receptacle
(14 -30R)
3-wire receptacle
(10 -30R)
If yo u have 3-wir e receptacle, like
this , a 3-wire dryer cord mu st be
purchased locall y.
Dryer shipped with cord to fit this
type 4 -wire receptacle
3-Wire Electrical Connection
If your receptacle is a 3-wire receptacle as shown
below, you must obtain a 3-wire dryer cord. A dryer
cord can usually be found at your local hardware
supply, electrical supply or home center. Cord should
have closed loop or upturned end wire terminating
connectors. The cord kit must be marked “For Use with
Clothes Dryers”.
3- wire receptacle
( 10-30R)
Typical 3- Wire Dryer Cord 240V/30 amp
NEMA 10-30 Type SRDT
A
If the dryer is installed in a mobile home,
recreational vehicles, new branch-circuit
installations or in areas where local
codes do not permit grounding through
the neutral conductor, only a 4-wire
power supply cord shall be used.
To change the cord:
1. Make sure that the dryer is not plugged into any
power outlet.
BDO NOT plug end of dryer power cord
into a live receptacle before connecting
dryer power cord to dryer terminals and
closing junction/splitter box as described
below.
BDO NOT repair old power supply cords.
Power cord must be changed only by a
qualified person. There is a risk of electric
shock!
2. Remove the screw from the cover of the junction box
located at the top rear of the dryer.
3. Remove the red, white and black wire from the
terminal block.
4. Remove the green ground wire from the ground
terminal.
5. Loosen the strain relief clamp holding the 4-wire
cable.
6. Thread the 4-wire cable out through the strain relief
clamp.
7. Thread the new 3-wire dryer cord through the strain
relief clamp.
8. Attach the power cord Ground conductor (the center
wire) to the terminal labeled N. Connect the
terminal labeled N and the Ground terminal labeled
G. Tighten the terminals so that they securely hold
the conductors.