Blomberg TKF 1330 User manual

Please read first!
Dear customer,
With the purchase of this appliance, which
is offering a load capacity of up to 6 kg,
you have made a decision for up-to-date
dryer technology – high quality, long serv-
ice life, high reliability and an optimum in
operating convenience.
•At first, please check if the appliance
was received undamaged.
• If a transport damage is noticed, notify
your supplier immediately; do not op-
erate the appliance!
These operating instructions...
…are intended to help you operate this
appliance quickly and safely.
•Read the instructions – before installa-
tion and initial operation of this appli-
ance.
•Pay special attention to the safety in-
formation.
•Keep the instructions for future refer-
ence.
•If you sell this appliance pass on the
instructions to the new owner.
Explanatory note on symbols
Throughout these instructions the follow-
ing symbols are used:
High voltage! Risk of electric shock!
Risk of other personal injury or proper-
ty damage.
Important information or useful ad-
vise.
CONTENTS
Machine Overview ..............................2
Safety First...........................................3
Disposal ...............................................3
Installation...........................................3
The proper location ..........................3
Built-under installation......................4
Washer/dryer combination ...............4
Levelling...........................................4
Changing hinge position ..................4
Electrical connection.........................5
The first time ....................................5
Before Drying ......................................5
What can be dried............................5
What must not be dried....................6
The right amount .............................6
The door ..........................................6
Programmes ........................................6
Programme selector..........................6
Standard programmes......................6
Special programmes ........................7
Timed programmes .........................7
Optional Functions..............................8
Buzzer mute ....................................8
Child-proof lock................................8
Time delay ..........................................8
Aborting a time-delay .......................9
Programme progress indicator...........9
Indicator lamp.....................................9
After drying.........................................10
Fluff filter ..........................................10
Condensed water container ..............10
AT A GLANCE ......................................12
Preparation and start ........................12
Changing the programme................12
Aborting a programme.....................12
Adding more laundry........................12
Laundry final drying..........................12
Programme end ...............................12
Programme table ................................13
Trouble Shooting ................................14
Technical Specifications /
Energy Consumption ..........................15
Drain hose connection......................4
Condenser.........................................10
Drum ribs .........................................11
1

Machine Overview
Control panel
Levelling feet
Programme selector Programme progress indicator
Indicator lamps
Display
Start/Pause/Cancel button
Rating label
Time delay buttons
Fluff filter
(inside the door)
Buzzer cancel button
On/Off button
2
Power cable
Water drain connector

Safety First
Intended use
• This appliance shall only be used for
drying and airing of clothing labelled
suitable for tumble drying.
• The care information in the clothing
must be followed.
• This appliance is not intended for
commercial use.
Safety information
• This appliance must be connected to a
properly installed earthed outlet, pro-
tected by a fuse of adequate capacity.
Do not operate the appliance if the
power cable or power cable plug are
damaged or the appliance shows any
other faults! Risk of electric shock!
• Never touch the power cable plug
with wet hands! Never pull on the ca-
ble to unplug, always pull on the plug
only.
Operate appliance only in well venti-
lated, low dust rooms. Do not block or
cover the appliance's vent slots.
Do not reach into the drum while the
appliance is heating up. Risk of scald-
ing by the hot and moist textiles!
• Keep children away from the appli-
ance! Electric appliances are no toys.
Textiles treated with cleaning materi-
als or having been dry cleaned must
not be dried in the appliance after-
wards. The vapors generated may
cause a risk of fire or explosion, poi-
soning hazard or damage to the appli-
ance!
• Periodically clean all important parts
of the appliance (see “After dry-
ing…”). Operating safety, drying time
and energy consumption depend on
such periodical cleaning.
• In case of malfunctions which cannot
be rectified by the information con-
tained in this manual:
Turn appliance OFF, unplug, notify
the customer service.
Never attempt to repair the appliance
yourself! You could endanger your
own life and the life of other users!
Only authorised electricians, such as
our service technicians, are permitted
to repair electric appliances.
Disposal
Where to leave the packaging?
The plastic wrapping must not get in-
to the hands of children! Risk of suffo-
cation!
The packaging is made of materials which
can be recycled.
• Separate the packing material by type:
– Styropor®parts and plastic wrap-
ping go to a valuable substance col-
lection point;
– battens go into bulky refuse.
The packaging is not to be disposed of
in the regular household refuse!
What to do with the old appliance?
Dispose of your old appliance in an envi-
ronmentally friendly manner.
• Ask you dealer or your local refuse col-
lection service how to best dispose of
your old appliance.
Before giving the appliance into bulky
refuse, disconnect it from the mains,
cut off the power cable and disable
the door lock – so children will not be
endangered.
Installation
The proper location
For drying the appliance requires a suffi-
cient supply of clean, cool room air.
Operate the appliance only in well
ventilated, low dust rooms. Do not
block or cover the appliance's vent
slots.
Do not operate appliance in locations
where there is a danger of freezing.
Some parts contain water and may be
damaged by frost.
3

The floor must have a sufficient load-
bearing capacity! If, for example, you
are stacking a washer and the dryer,
this combination can – when loaded –
reach a total weight of 160 kg.
Important:
• Place appliance on an even an level
floor only.
• Do not stand appliance on the power
cable.
• Keep at least 1 cm distance to walls or
other furniture.
Built-under installation
This appliance can be installed under a
worktop.
Only authorised specialists are permit-
ted to carry out a built-under installa-
tion. Risk of electric shock!
Washer/dryer combination
This appliance can be put on top of any of
our washing machines.
• A special stacking kit is required (stock
no. MBS2000), available at the cus-
tomer service or specialised trade.
Levelling
• Adjust feet until the appliance is level
and does not rock. Checking with a
spirit level is recommended.
Important:
• Adjust by the feet only, do not use
wooden wedges or similar. Never re-
move the feet!
Changing hinge position
If you wish to open the door to the other
side, you can have the hinge position
changed from left hand to right hand or
vice versa by our customer service.
Drain hose connection
The water arising from drying (“con-
densed water”) is normally collected in the
condensed water container, which needs
to be emptied after every drying cycle.
• The condensed water can also be
drained permanently by means of the
drain hose supplied into a siphon trap
or any other drain.
In that case the condensed water con-
tainer needs no longer to be drained –
nevertheless the >Reservoir full <
indicator will light at the end of each
drying cycle.
Important:
• In order for the water to run off ob-
serve the maximum hose length and
highest point above the floor (see
“Technical Specifications”)!
• Ensure that there are no sharp bends
in the hose!
Here's how to proceed:
1. At the water drain connector, pull the
hose up from inside the appliance by
hand. Do not use pliers!
2. Push the drain hose firmly on the wa-
ter drain connector.
3. Run the drain hose to the waste outlet
of a washbasin and connect it.
4. If the drain hose is hung to the edge of
a washbasin or bathtub, secure it
against slipping off.
•For this a special top cover is required
(stock no. AP 2000), available at the
customer service or specialised trade.
4

Electrical connection
Connect the appliance to a properly in-
stalled earthed outlet, protected by a fuse
of adequate capacity.
Important:
• The connection must conform to the
applicable regulations in your country
and of your local Electricity Board.
• The power cable plug must be accessi-
ble after installation.
• For a firmly fixed connection a master
switch with at least 3 mm contact
clearance must be used.
• Voltage and fuse rating of the appli-
ance is stated on the rating label (on
the rear panel and behind the door).
Note down the appliance's model and
identification number from the rat-
ing label, in case you need help from
customer service.
• The stated voltage must match with
your mains voltage.
• Connection by extension cables or trail-
ing sockets is not permitted.
• When connecting to the mains, the
programme selector must be set to
Stop.
A damaged power cable must be re-
placed by an authorised qualified elec-
trician. Until the appliance has been
repaired it must not be operated! Risk
of electric shock!
The first time
• To remove any possible residue from
production wipe out the drum with a
moist cloth before the first drying cycle
• During the first drying cycle there may
be an annoyance caused by bad smell.
• Check to see if any water emerges
from the appliance during the drying
cycle. If necessary, push the drain hose
on more tightly.
• Remove metal parts (buckles, etc.) or
put textiles in a linen bag or similar.
• Empty pockets, remove all foreign ob-
jects (coins, pens, etc.). Close zippers,
hooks and eyes.
What must not be dried
Do not load dripping wet laundry in
the dryer. The dryer may be damaged,
and the energy consumption will be
excessively high.
– Sensitive fabrics (silk, curtains, etc.)
may crease.
Before Drying
What can be dried
•The laundry should be spin-dried as
much as possible – to the extent per-
missible for the respective fabric.
Always observe the care symbols
shown on the garment labels!
•Tumble dry only textiles labelled ac-
cordingly – and only with the appro-
priate drying programme.
•Only woollens suitable for machine
wash may be put in the dryer; the cor-
responding special programme will
not dry but nicely soften it.
•If possible load textiles of the same
kind; thin tea towels will dry much
quicker than thick bath towels.
Care symbols for drying
Suitable for drying at high
temperature:
Hot wash / coloured cottons,
cotton, linen
Suitable for drying at re-
duced temperature:
Easy-care synthetics (polyes-
ter, polyamide); mixed fabrics
(with cotton)
Drying in dryer not possible:
Sensitive fabrics, curtains etc.
• The current of the appliance can be
set according to the electrical
infrastructure and fuse rating of your
area. To change the current from 16 A
to 10 A: Set the programme selector to
>One piece<. Press the buzzer cancel
button for 3 seconds. 16 will appear on
the display. Press - button, 10 will appear
on display, the appliance is set to 10 A.
To change the current from 10 A to 16 A:
Follow the same route, this time press + to
change it to 16 A.
5

The door
• To open, push the door.
• Put laundry loosely in the drum.
• Close the door; push against the door
until you hear the door lock engage.
Take care no textiles are caught by the
door.
Programmes
Programme selector
The programme selector can be turned ei-
ther clockwise or counter-clockwise.
For detailed information about the individ-
ual drying programmes, refer to the "Pro-
gramme table".
Always choose a programme suitable
for the textile type.
Observe the care symbols shown on
the garment labels!
Pushing the On/Off button, the ap-
pliance is turned on; the programme,
however, will start only when the
>Start< button is pressed.
When changing to a different pro-
gramme the programme must be
stopped first; in that case the >Start<
button must be pressed for 2 sec. in
order to cancel programme.
The display will show the remaining time
during the programs.
– Down filled textiles (pillows, duvets)
are not suitable.
– Air-tight (rubberized) textiles.
– Foam or rubber parts (shoulder pads
and the like) might deform and dam-
age laundry or appliance.
– Textiles that were treated with clean-
ers or dry-cleaned.
The vapors generated may cause a risk
of fire or explosion, poisoning hazard
or damage to the appliance!
The right amount
• The maximum load capacity depends
on the textile type and the corre-
sponding drying programme.
Please note the information given in
the “Programme Table”! Overloading
the drum has an adverse effect on the
drying result.
Always try to utilise the maximum
load capacity.
6
Standard programmes
Depending on the textile type, several
standard programmes are available:
– Cottons:
Drying at high temperature.
– Easy-care:
Drying at reduced temperature.

Each standard programme offers different
drying levels to be chosen.
Select drying level only as high as ab-
solutely necessary. This will treat the
textiles with care and limits the energy
consumption.
Special programmes
A number of special programmes are also
available:
Drying level Result
Extra dry* thick, multi-layer tex-
tiles: dried ready for
the linen cupboard
Linen cup-
board dry regular textiles: dried ready for the linen cup-
board
Ironing dry requiring regular iron-
ing
*only for White/coloured cottons
Timed programmes
For final drying or airing your washing sev-
eral timed programmes are available.
– 60min, 40min, 20min, 10min
Drying at a reduced temperature; the
drying cycle will always end after the
chosen time has elapsed, irrespective
of the drying level.
–Short Delicate Program
Extra gentle drying at an reduced tem-
perature and limited programme du-
–
Textiles marked with P ( chemical cleaning)
or must be handwashed can be treated in
this programme by using special care
products. Cleaning respectively fluffing of
pulls, throusers, dresses, jackets, costumes,
etc. is achieved. The care products are
adapted for use for clothes in cotton, mixt
fibres, wool, silk and linen.
By using a sheet impregnated with a special
active solution, small stains can be removed
before to introduce the laundry piece into the
dryer. In case of bigger sized and already dry
or crusted stains the cleaning by professionals
is recommended.
The active solution sheet removes also bad
smellings during the program ( e.g. cigarette
smoke).
For extrem sensitive textiles the use of a laundry
bag is recommended.
Application:
1. Before fluffing in the dryer all small and fresh
stains must be removed.
2. Introduce 1 to 4 pieces into the drum or first
into the laundry bag.
3. Select on program selector the program
“Short Delicates”.
4. When program is finished, take laundry
pieces out from the drum or the laundry bag
and place them over a hanger to avoid creasing.
Anti-crease
If the textiles cannot be removed from the
dryer after completion of the drying cycle,
this anti-creasing cycle will automatically start,
separate and smooth your drying to reduce
creasing.
sounds. And display will show a bar
rotating during this stage.
Throughout this anti-crease stage the
drum rotates briefly every 4 minutes
for 2 hours; at the same time a buzzer
7
Fluff/Refresh:
–
For refreshing or airing, for all types of fabrics.
One Piece
Drying at reduced temperature in 30 min.
up to 1.5 kg load, for all types of fabrics.
ration of approx. 20 minutes. Textiles
such as fine textiles, delicate underwear
and accessories like scarf can be dried
by this programme.
Tumble dry only textiles labelled
accordingly.

The child lock will deactivate all the
buttons exept the On/Off button.
Buzzer Cancel
At programme end and throughout the
anti-crease stage (see above) a buzzer
sounds.
• If this is inconvenient to you, press this
button to mute the buzzer.
•There is no need to press the button
again for the next drying cycle, be-
cause the dryer remembers this setting.
Child-proof lock
With the child-proof lock the appliance
can be made child-proof.
To activate the child-proof lock:
Press and hold both buttons indicated
by the arrows for approx. 5 seconds,
until the child lock indicator lights on.
Time delay
Using the delay-timer function the pro-
gramme start can be delayed up to
19 hours.
As the appliance will then dry unat-
tended – i.e. acting as heater – you
should prepare and set the dryer with
special care!
Here's how to proceed:
1. Check to see that
– the vent slots are not blocked,
– the fluff filter is cleaned,
– the vent tube is correctly fitted.
2. Load laundry and close the door.
3. Set programme selector.
If the delay-timer is activated the time
delay indicator on the right of the display
flashes.
To deactivate the child-proof lock:
Press and hold both buttons indicated
by the arrows for approx. 5 seconds,
until the child lock indicator is off.
Optional Functions
• If the buzzer sound is inconvenient, it
can be muted (see below).
• You may remove the textiles at any
time and end the programme.
There is no need to press the button
again for the next drying cycle, be-
cause the dryer remembers this setting.
5. Press the >Start< button.
This function can be set during the
programme or in non-usage and standby.
8
4. Press the button on the left of the
display until the desired delay is reached.
(each press to + or - buttons will
increase or decrease the delay for
1 hour)

Programme progress
indicator
This row of indicators indicate the progress
of the running programme.
• When the programme is running, one
of the indicators is illuminated
indicating the current programme
stage:
>Drying <
– is illuminated during the actual heat-
ing phase of a drying programme.
During the time-delay period more
laundry can be added.
After adding, the >Start< button must
be pressed again.
"Fluff filter").
If Clean Fluff Filter indicator is
flashing during the programme
see "Trouble shooting".
Aborting a time-delay
An active delay timer can be stopped at
any time:
Press the >Start< button for 2 seconds until
the time delay indicator is off.
•When you set a programme and press
the start button, one of the indicators
will light indicating that the program
is started.
Empty the tank
At the end of the program when the water tank
has to be emptied or when the drain hose is
connected.
Clean the condenser
In regular intervals after about 20 program
runs (See also Air cooler)
Indicator lamps
>Child Lock <
– is illuminated when the child lock is
activated.
>Clean Fluff Filter <
– is illuminated at programme end to
remind you to clean the fluff filter (see
–flashes when the time delay option is active.
>Time delay <
><
><
On/ Off
9
>Ready to Iron <
– is illuminated when the clothes reached
Iron Dry level.
>Cupboard Dry <
– is illuminated when the clothes reached
Cupboard Dry level.
>Airing
– is illuminated during the 8 minute
cooling down stage or the pro-
gramme >Fluff/Refresh < was chosen.
>Stop/Anti-Creasing
– is illuminated when the programme
end is reached
flashes while the anti-crease stage is
active.
<
<
If Drying lamp indicator is
flashing a misoperation or fault has
occurred (see "Trouble shooting").

After drying...
Fluff filter
Fluff balls are rubbed off by wearing the
clothes – not by drying. When drying,
these fluff balls are trapped in the fluff fil-
ter.
It is absolutely necessary to clean the
fluff filter after every drying cycle.
To clean the fluff filter:
1. Open the door.
2. Pull the fluff filter out of the door.
3. Carefully remove the fluff balls –by
hand or with a soft, dry cloth.
4. Insert fluff filter the right way round.
Condensed water container
When drying, water is separated from air-
stream of the moist laundry (“condensat-
ed”). This water is collected in the con-
densed water container.
The condensed water container needs
emptying
–after every drying cycle, or
– if during the drying cycle the >Res-
ervoir full < indicator flashes; in
that case the programme stops.
Do not pull the condensed water con-
tainer out while the programme is
running.
The condensed water can also be
drained permanently by means of the
drain hose supplied into a siphon trap
or any other drain (see “Drain hose
connection”).
Emptying the condensed water contain-
er:
1. Pull condensed water container care-
fully out off the fascia; hold the rear
with the other hand.
2. Open the condensed water container's
closure.
3. Pour the water out.
4. Remove any fluff balls from the clo-
sure, if present. Close the closure.
5. Slide the condensed water container
fully in.
Condensed water is no drinking wa-
ter! However, after filtering (through a
coffee filter) it can be used in a steam
ironer or air humidifier.
Condenser
In the air cooler (“Condenser”) the moist,
warm air stream is cooled by drawn-in
cold room air, causing the water to sepa-
rate.
The condenser shall be cleaned
–after approx. 20 drying cycles, or
–twice a month.
10

To clean the condenser:
1. Open the door. Wait for the appliance
to cool down.
2. Open service door latch.
The service door will open. Then turn
3. Pull the condenser out at the handle.
4. Rinse condenser – vertically and hori-
zontally – thoroughly under running
water. Let water drain thoroughly.
5. Push condenser – with the lettering
embossed at the edge facing up – ful-
ly in, then fix the locking level.
6. Close the service door.
Drum ribs
At the rips on the inside of the drum are
moisture sensors, signalling to the appli-
ance when the textiles are dry.
To clean the drum ribs:
1. Open the door. Wait for the appliance
to cool down.
2. Wipe all drum ribs with a soft cloth
moistened with vinegar. Wipe dry with
a soft cloth.
Do not use solvents, naphtha or simi-
lar! Fire or explosion hazard!
the locking level . Clean drum ribs
–after approx. 50 drying cycles, or
– four times a year.
11

AT A GLANCE
Preparation and start
1. Put laundry in the drum and close the
door.
4. If desired set delay timer
5. Press the >Start< button.
2. Turn the appliance on by pressing
On/Off button
Programme end
The programme cycle has completed
when the indicators >Stop/Anti-Ceasing <
and >Clean fluff filter < are illuminated.
Throughout the anti-crease stage
the indicator >Stop/Anti-Ceasing <
is on. The programme can then be
ended at any time.
1. Open door, remove laundry, check
drum for foreign objects.
2. Press »On/Off« button.
3.After every drying cycle :
– Clean the fluff filter (see "Fluff fil-
ter").
4.After approx. 50 drying cycles or
four times a year:
– Clean drum ribs (see "Drum ribs").
Laundry final drying
1. Set the programme selector to one of
the timed programmes >60min<,
>40min<,
2. Press the >Start< button.
Adding more laundry
This makes only sense at the begin-
ning of a drying cycle, otherwise the
result will be a mixture of not quite
dry and too much dried textiles.
2. Put laundry in the drum and close the
door.
3. Press the >Start<button.
3. Set the programme selector.
Aborting a programme
Do not turn appliance off during the
heating phase (indicator >Drying <
is on). Risk of heat accumulation!
2. Set the programme selector to
>Fluff/Refresh<
3. Press the >Start< button.
4. Wait for the programme cycle to end.
1. First stop the running proramme (press
the >Start< button for 2 seconds.
1. Press pause button.
or >10min<>20min<
6.When required :
– Clean housing and fascia using a
soft cloth and a mild soap; wipe dry
with a soft cloth.
Do not use scrubbers and scouring
powders! They will damage the plastic
parts and enamel.
When the door is opened during the
programme, the programme will be
paused automatically and the light on
the start button will flash. The start
button must be pressed again to
continue the programme.
Changing the programme
When changing to a different pro-
gramme the running programme must
be stopped first.
To do so the >Start< button must
be pressed for 2 sec. in order to cancel
programme.
5. After approx. 20 drying cycles or twice
a month:
– Clean condenser.
12

Programme table
audible signal at programme end and during the Anti-crease stage
Care symbol Textile type Programme Maximum load (kg)
Optional
function
Time delay Anti-crease Buzzer mute
White/coloured cottons
Long wearing cotton
and linen textiles Extra dry 6.0 •
Linen cupboard dry •
Ironing dry •
Easy-care
Synthetics (polyester,
polyamide); mixed fab-
rics (with cotton) •
Linen cupboard dry
•
Ironing dry
Special Pogrammes
Synthetics, cotton or
blended fabric One piece •
Timed programmes
Laundry to be finished
dried, or small similar
textiles
60 min warm as
above •
20 min warm •
10 min warm •
1.0 •
maximum 2 hours extra anti-crease stage after programme end
•
40 min warm
•
aired above
Laundry to be briefly as
Delicates
Short delicate 1-4
pieces •
"P" marked textiles
(20min)
Fluff/Refresh
13
3.0
1.5

Trouble Shooting
Let us help you!
If you cannot solve the problem yourself contact our customer service. Have the model and
identification number as per rating label handy.
If you notice… check…
Appliance cannot be turned on or
programme will not start •Programme selected? Start<button pressed? •Door properly closed?
•Power cable plug plugged in?
•Mains fuse has blown in your home.
Appliance does not react to input •Combination of optional functions not possible.
•Child-proof lock activated?
•If fault persists: unplug, wait a few seconds before
plugging in again.
Indicator >Stop/ < flashes,
buzzer sounds (for 2h) Anti-crease stage is active (duration 2 hours). •Turn appliance off and take the laundry out.
Indicator >Stop/ < is on,
buzzer sounds Programme end reached. •Turn appliance off and take the laundry out.
Indicator >Clean fluff filter <
is on •Clean fluff filter.
Programme stops without appar-
ent reason •Door is opened? Press the >Start <button. •Did a power failure occur? Press the >Start<button.
Drum interior light (depending
on model) does not work •Lamp faulty? Contact customer service.
Laundry too moist or drying time
too long •Drum overloaded? See "Programme table". •Make sure of good ventilation. Check vent slots.
•Check vent tube and wall mount vent, if necessary.
•Clean fluff filter.
•Clean drum ribs.
•Finish dry with a suitable timed programme.
Textiles are shrunk, felted, dam-
aged •Dry only textiles labelled suitable for tumble drying. •Dry only with a programme suitable for the particular
textile type.
Indicator >clean fluff filter <
flashes during the programme
•Stop the programme
•Clean the fluff filter.
Indicator >Tank Full< is on •Drain the tank and push the start button.
14

Technical Specifications / Energy Consumption
Load capacity (dry weight)
–Cottons
–Synthetics
–Short Delicate
–One piece
max. 6.0 kg
max. 3.0 kg
max. 1.0 kg
max. 1.5 kg
Drying method Condenser, moisture controlled
Dimensions
–Height / height for built-under installation
–Width
–Depth / depth for built-under installation
–Depth with door open
–Height adjustment of feet
85.0 cm / 82.0 cm
59.5 cm
60 cm / 59 cm
106.5 cm
0.5 cm
Weight, unpacked approx. 42 kg
Electrical connection
–Voltage
–Connected load
–Fuse protection
230 V ~50 Hz
2800 W
16 A
Condenser water drain hose
–Diameter
–Length of drain tube
–Highest point drain hose
1 cm
maximum 140 cm
maximum 80 cm
Consumption 1)
– Cottons linen cupboard dry
– Cottons linen cupboard dry
2)3)
– Cottons ironing dry
– Cottons ironing dry
2)
– Synthetics linen cupboard dry
2)
forspinning Energy Time
speed
1) Standard values, determined under standard conditions. Depending on spin speed,
textile type and ambient conditions a deviation of up to 10% is possible.
2) Test programme according to DIN EN 61121.
3) Standard programme for energy identification label.
1000 min-1
1400 min-1
800 min-1
1400 min-1
800 min-1
: 3.0 kWh 80 min
: 4.05 kWh 120 min
: 2.5 kWh 70 min
: 3.5 kWh 110 min
: 1.2 kWh 40 min
15