Blonder tongue BAVM-860 SAW Series User manual
One Jake Brown Road
Old Bridge, NJ 08857-1000 USA
(800) 523-6049 • (732) 679-4000 • FAX: (732) 679-4353
www.blondertongue.com
©2015 Blonder Tongue Laboratories, Inc. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of their respective owner.
Model Stock No. Description
BAVM-860 SAW 5990A Channelized Audio/Video Modulator
Status Date Document No. Issue No. Author
Active May 21, 2010 651224400A 1 KK
Obsolete Jun. 4, 2009 651210100B 2 KK
2BAVM-860 SAW Series
Instruction Manual
We recommend that you write the following information in the spaces provided below.
The information contained herein is subject to change without notice. Revisions may be
issued to advise of such changes and/or additions.
Correspondence regarding this publication should be addressed directly to:
Blonder Tongue Laboratories, Inc.
One Jake Brown Road
Old Bridge, NJ 08857
Document Number: 651224400A
All product names, trade names, or corporate names mentioned in this document are
acknowledged to be the proprietary property of the registered owners.
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Reverse engineering or disassembly is prohibited.
Purchase Location Name:
Purchase Location Telephone Number:
BAVM-860 SAW Serial Number:
3BAVM-860 SAW Series
Instruction Manual
4
2.1 PRODUCT APPLICATION & DESCRIPTION................................................................................................................. 6
2.2 PRODUCT SPECIFICATION .......................................................................................................................................... 8
9
3.1 NOTE TO CATV SYSTEM INSTALLER ........................................................................................................................... 9
3.2 UNPACKING AND HANDLING..................................................................................................................................... 9
3.3 MECHANICAL INSPECTION......................................................................................................................................... 9
3.4 DAMAGE IN SHIPMENT .............................................................................................................................................. 9
3.5 PRECAUTIONS.............................................................................................................................................................. 9
4.1 AUDIO MODULATION ................................................................................................................................................ 10
4.2 VIDEO MODULATION................................................................................................................................................. 10
4BAVM-860 SAW Series
Instruction Manual
The STOP sign symbol is intended to alert you to the presence of REQUIRED operating and maintenance
(servicing) instructions that if not followed, may result in product failure or destruction.
The YIELD sign symbol is intended to alert you to the presence of RECOMMENDED operating and maintenance
(servicing) instructions.
The LIGHTNING flash symbol is intended to alert you to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.
å Read all safety and operating instructions before you operate the unit.
å Retain all safety and operating instructions for future reference.
å Heed all warnings on the unit and in the safety and operating instructions.
å Follow all installation, operating, and use instructions.
å Unplug the unit from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the unit.
å Do not use accessories or attachments not recommended by Blonder Tongue, as they may cause hazards, and will void the warranty.
å Do not operate the unit in high-humidity areas, or expose it to water or moisture.
å Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious personal injury and damage to the
unit. Install the unit only in a mounting rack designed for 19” rack-mounted equipment.
5BAVM-860 SAW Series
Instruction Manual
,
Before returning product, please contact the Blonder Tongue Service
Department at 1-800-523-6049, Ext. 4256 or visit our website: for further information.
å Do not block or cover slots and openings in the unit. These are provided for ventilation and protection from overheating. Never place the
unit near or over a radiator or heat register. Do not place the unit in an enclosure such as a cabinet without proper ventilation. Do not mount
equipment in the rack space directly above or below the unit.
å Operate the unit using only the type of power source indicated on the marking label. Unplug the unit power cord by gripping the plug, not the
cord.
å The unit is equipped with a three-wire ground-type plug. This plug will fit only into a ground-type power outlet. If you are unable to insert the
plug into the outlet, contact an electrician to replace the outlet. Do not defeat the safety purpose of the ground-type plug.
å Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention
to cords at plugs, convenience receptacles, and the point where they exit from the unit.
å Be sure that the outdoor components of the antenna system are grounded in accordance with local, federal, and National Electrical Code (NEC)
requirements. Pay special attention to NEC Sections 810 and 820. See the example shown in the following diagram:
å We strongly recommend using an outlet that contains surge suppression or ground fault protection. For added protection during a lightning
storm, or when the unit is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the lines between
the unit and the antenna. This will prevent damage caused by lightning or power line surges.
å Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing the antenna, take extreme care to avoid touching such power lines or circuits, as contact with them can be fatal.
å Do not overload wall outlets or extension cords, as this can result in a risk of fire or electrical shock.
å Never insert objects of any kind into the unit through openings, as the objects may touch dangerous voltage points or short out parts. This could
cause fire or electrical shock.
å Do not attempt to service the unit yourself, as opening or removing covers may expose you to dangerous voltage and will void the warranty. Refer
all servicing to authorized service personnel.
å Unplug the unit from the wall outlet and refer servicing to authorized service personnel whenever the following occurs:
o The power supply cord or plug is damaged;
o Liquid has been spilled, or objects have fallen into the unit;
o The unit has been exposed to rain or water;
o The unit has been dropped or the chassis has been damaged;
o The unit exhibits a distinct change in performance.
å When replacement parts are required, ensure that the service technician uses replacement parts specified by Blonder Tongue. Unauthorized
substitutions may damage the unit or cause electrical shock or fire, and will void the warranty.
å Upon completion of any service or repair to the unit, ask the service technician to perform safety checks to ensure that the unit is in proper
operating condition.
BAVM-860 SAW Series
Instruction Manual
The BAVM-860 SAW is an all solid state audio/video modulator that provides a modulated visual and aural RF carrier output
on any single CATV channel 2 to 79. The modulator can be used to put sound and color video on any of the above listed
channels in a CATV, MATV or SMATV system.
The modulator accepts standard (sync negative) polarity video at a 0.7-2.5 V P-P level from sources such as a TV camera,
video tape recorder, TV demodulator or satellite receiver.
The BAVM-860 SAW features a +55 dBmV RF output level, and IF SAW filtering for adjacent channel operation. All
aeronautical channels are offset positive with a tolerance of ±5 kHz as required by FCC 21006. For ease of operation, all
level controls are located on the front panel.
A block diagram of the BAVM-860 SAW is shown below. The audio/video modulator accepts a baseband video and audio
input and outputs an RF CATV channel. The RF level control provides up to +55 dBmV output. The video modulator control
sets the depth of modulation of 87.5% over an input video level range from 0.7VP/P to 2.5VP/P. An audio modulation
control permits adjustment for ±25 kHz peak deviation of the aural carrier.
The BAVM-860 SAW also provides a field-defeatable pre-emphasis network and an aural level control to ensure the
proper aural/visual ratio. A six foot cord and a convenience AC outlet on each amplifier permits easy connections between
racked units.
7BAVM-860 SAW Series
Instruction Manual
The BAVM-860 SAW is designed with an integral mounting bracket and is supplied with the necessary screws for installing
the unit in a standard 19” EIA rack.
Below are the front and rear pictures of the unit:
Adjusts depth of modulation.
Controls amplitude of aural RF carrier to change aural/visual ratio.
Adjusts for 25 kHz peak deviation.
Simultaneously adjusts amplitude of aural and visual carriers.
-30 dB Output test point.
When using the BAVM-860 SAW with a stereo encoder it may be necessary
to disable the audio pre-emphasis circuit. Refer to your stereo encoder’s
instruction manual for required modulator settings. Should the audio pre-
emphasis need to be disabled, move the jumper according to the diagram
at the right.
Blonder Tongue’s SE Series of stereo encoders do
not require the audio pre-emphasis to be disabled. When it
comes to using the SE Series with a BAVM-860 SAW, keep the
jumper as it comes from the factory in the enable position.
BAVM-860 SAW Series
Instruction Manual
RF Typical
Frequency Range: ........................... CATV channels 2 to 79
Output Level: ....................................................... 55 dBmV
Output Level Range: ......... 15 dB, continuously adjustable
by front panel Output Level Control
Audio/Video Carrier Ratio Control:........... -9 dB to -20 dB,
Frequency Tolerance:............ ±10 kHz - standard channels
±5 kHz FCC 21006 Offsets
Audio Carrier Frequency Setting:.................... ±1 kHz, Max
4.5 MHz above video carrier
RF to Video Response
from Fv -0.5 MHz to Fv +4.2 MHz:......... 1 dB P/V
Broadband Noise ..................................................... -90 dB
Spurious Output in 50 – 860 MHz Range
@ +55 dBmV Output: .........................................-60 dB
Output Match (Return Loss): ...................................... 12 dB
Vestigial Sideband Reponse:
@Channel Edge ...........................................-20 dB
@Adjacent Channel.....................................-40 dB
Video
Input for 87.5% Modulation: ................. 0.7 V to 2.5 V P-P
Video Input Return Loss: .......................................... 18 dB
Video Carrier-To-Noise Ratio in 4 MHz Bandwidth: .. 60 dB
P-P Video to 60 Hz RMS Hum Ratio: ......................... 60 dB
Differential Gain at 87.5% Modulation: ..................... ≤ 5%
Differential Phase at 87.5% Modulation: ..................... ≤ 5°
Group Delay ...................................................... 170 ± 50 nS
Audio
Input Impedance: ......................... 10K Ohms, Unbalanced
Input for 25 KHz Peak Deviation: ................... 140 mV RMS
Audio Frequency Response:................................... ±1.0 dB
(50 Hz to 15 kHz ref to std 75 msec pre-emphasis)
4.5 MHz Intercarrier Stability:.............................. ±5.0 kHz
General
Power Requirements: ............... 105-130 VAC, 60 Hz, 10 W
Temperature Range: .............................. 0 to 50 degrees C
Mechanical
Dimensions: .................. 19 x 1.75 x 3.5, W x H x D, inches
Mounting: .........................................19” single rack space
Line Cord: ..... 3 wire grounded, 3 wire convenience outlet
Finish: .................................................................... Plated
Shipping Weight:......................................... 4 lbs. (approx)
Connectors
Audio In: ............................................................... “F” Type
Video In: ............................................................... “F” Type
RF Out: ............................................................... “F” Type
RF Output Test - 30 dB:......................................... “F” Type
9BAVM-860 SAW Series
Instruction Manual
This reminder is provided to call the CATV System Installer's attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Each modulator is shipped with all equipment assembled, wired, factory tested, and then packaged in an appropriate
shipping container.
Ensure that all accessories are removed from the container and packing material before they are discarded.
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no wires, cables,
or connectors are broken, damaged or loose.
Should any damage be discovered after unpacking the unit, immediately file a claim with the carrier. A full report of the
damage shall be made and a copy forwarded to Blonder Tongue Laboratories Inc. The company will then advise what
disposition is to be made of the equipment.
Adherence to the initial installation precautions outlined in the Table below will help prevent problems arising during the
installation and future maintenance of the unit.
Returning Product for Repair (or Credit)
, regardless if
the product is being returned for repair or credit. Before returning product, please contact the Blonder Tongue Service
Department at 1-800-523-6049, Ext. 4256 or visit our website: for further information.
Avoid Heat Buildup Allow (1) EIA rack space (1.75") between powered headend
products in the equipment racks.
Ensure easy access to rack wiring. Allow a minimum of 18 inches behind the equipment rack(s).
Facilitate servicing and maintenance. Allow a minimum of 36” of clearance in front of the equipment
rack(s).
Avoid direct heating or air conditioning. If unavoidable, use deflector plates.
AC power source outlets. Locate equipment near sufficient outlets to provide power
for test equipment and power tools.
Rack Support. Make certain rack supports are sufficiently rigid to
support racks.
Building leakage. Beware of dripping water onto equipment from leaky roofs,
waveguide roof entries, and cold water pipe condensations.
BAVM-860 SAW Series
Instruction Manual
After installing the unit, make the following adjustments:
With audio source connected, adjust Audio Modulation control for 25 kHz deviation. In lieu of an audio modulation meter,
use a TV set and adjust for equal volume as compared to a known off-air broadcast. Monitor for a few minutes to assure
the maximum volume does not over modulate, which can cause picture distortion.
With a nominal 1 volt P-P video source connected, adjust the Video Modulation control for 85% depth of modulation. If
a spectrum analyzer is not available, a TV set can be used to check for proper picture contrast.
AV
BAVM-860SAW
Modulator
Splitter/Combiner
To Distribution System
DC T.P.
Attenuator
and Amp if
Required
24 67
7
17
9
98
8
11
Antennas
BPF-z Bandpass Filter
ZSCA Single
Channel
AGC Amplifier
MCX-Uz U/V Converter
AV
BAVM-860SAW
Modulator
Attenuation
if Required
To Distribution System
8
2
7
17
Antennas
Heterodyne
Processor 24
4
6
69
9
11
11
Combiner
One Jake Brown Road
Old Bridge, NJ 08857-1000 USA
732-679-4000 • Fax 732-679-4353
www.blondertongue.com
Limited Warranty
Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product,
as BT may determine) any product manufactured by BT which proves to be defective in materials or workmanship or fails to
meet the specifications which are in effect on the date of shipment or such other specifications as may have been expressly
agreed upon in writing (i) for a period of one (1) year from the date of original purchase (or such shorter period of time as may
be set forth in the license agreement specific to the particular software being licensed), with respect to iCentral™ (hardware and
software) and all other software products (including embedded software) licensed from BT, (ii)) for a period of one (1) year from
the date of original purchase, with respect to all MegaPort, IPTV products and fiber optics receivers, transmitters, couplers and
integrated receivers/distribution amplifiers (including TRAILBLAZER™, RETRO-LINX™ and TWIN STAR™ products) as well as for
VideoCipher® & DigiCipher® satellite receivers, and (iii) for a period of three (3) years from the date of original purchase, with
respect to all other BT products. Notwithstanding the foregoing, in some cases, the warranty on certain proprietary sub-assembly
modules manufactured by third party vendors and contained in BT products and on certain private-label products manufactured
by third parties for resale by BT are of shorter duration or otherwise more limited than the standard BT limited warranty. In such
cases, BT’s warranty with respect to such third party proprietary sub-assembly modules and private-label products will be limited
to the duration and other terms of such third party vendor’s warranty. In addition, certain products, that are not manufactured
but are resold by BT, carry the original OEM warranty for that product. The limited warranty set forth in this paragraph does not
apply to any product sold by BT, which at the time of sale constituted a Closeout Product.
BT will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may determine) any product
sold by BT which at the time of sale constituted a refurbished or closeout items (“Refurbished Product” and “Closeout Product”),
which proves to be defective in materials or workmanship or fails to meet the specifications which are in effect on the date of
shipment or such other specifications as may have been expressly agreed upon in writing, for a period of ninety (90) days from
the date of original purchase. Notwithstanding the foregoing, in some cases, the warranty on third party software and on certain
proprietary sub-assembly modules manufactured by third party vendors and contained in BT products and on certain private-
label products manufactured by third parties for resale by BT are of shorter duration or otherwise more limited than the BT limited
warranty for Closeout Products. In such cases, BT’s warranty for Closeout Products constituting such third party software, third
party proprietary sub-assembly modules and private-label products will be limited to the duration and other terms of such third
party vendor’s warranty. In addition, notwithstanding the foregoing, (i) certain Closeout Products that are not manufactured (but
are resold) by BT, carry the original OEM warranty for such products, which may be longer or shorter than the BT limited warranty
for Refurbished or Closeout Products. All sales of Refurbished or Closeout Products are final.
To obtain service under this warranty, the defective product, together with a copy of the sales receipt or other satisfactory proof
of purchase and a brief description of the defect, must be shipped freight prepaid to: Blonder Tongue Laboratories, Inc., One Jake
Brown Road, Old Bridge, New Jersey 08857.
This warranty does not cover damage resulting from (i) use or installation other than in strict accordance with manufacturer’s
written instructions, (ii) disassembly or repair by someone other than the manufacturer or a manufacturer-authorized repair
center, (iii) misuse, misapplication or abuse, (iv) alteration, (v) lack of reasonable care or (vi) wind, ice, snow, rain, lightning, or
any other weather conditions or acts of God.
OTHER THAN THE WARRANTIES SET FORTH ABOVE, BT MAKES NO OTHER WARRANTIES OR REPRESENTA-
TIONS OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE CONDITION, DESCRIPTION, FITNESS FOR A PARTIC-
ULAR PURPOSE, MERCHANTABILITY OR AS TO ANY OTHER MATTER, AND SUCH WARRANTIES SUPERSEDE
ANY ORAL OR WRITTEN WARRANTIES OR REPRESENTATIONS MADE OR IMPLIED BY BT OR BY ANY OF BT’S
EMPLOYEES OR REPRESENTATIVES, OR IN ANY OF BT’S BROCHURES, MANUALS, CATALOGS, LITERATURE
OR OTHER MATERIALS. IN ALL CASES, BUYER’S SOLE AND EXCLUSIVE REMEDY AND BT’S SOLE OBLIGA-
TION FOR ANY BREACH OF THE WARRANTIES CONTAINED HEREIN SHALL BE LIMITED TO THE REPAIR OR
REPLACEMENT OF THE DEFECTIVE PRODUCT F.O.B. SHIPPING POINT, AS BT IN ITS SOLE DISCRETION SHALL
DETERMINE. BT SHALL IN NO EVENT AND UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR
ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, PUNITIVE, DIRECT OR SPECIAL DAMAGES BASED UPON
BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT LIABILITY OR OTHERWISE OR
ANY OTHER LEGAL THEORY ARISING DIRECTLY OR INDIRECTLY FROM THE SALE, USE, INSTALLATION OR
FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM BT.
All claims for shortages, defects and non-conforming goods must be made by Buyer in writing within five (5) days of receipt of
merchandise, which writing shall state with particularity all material facts, concerning the claim then known to Buyer. Upon any
such complaint, Buyer shall hold the goods complained of intact and duly protected, for a period of up to sixty (60) days. Upon
the request of BT, Buyer shall ship such allegedly nonconforming or defective goods, freight prepaid to BT for examination by
BT’s inspection department and verification of the defect. BT, at its option, will either repair, replace or issue a credit for products
determined to be defective. BT’s liability and responsibility for defective products is specifically limited to the defective item or to
credit towards the original billing. All such replacements by BT shall be made free of charge f.o.b. the delivery point called for in
the original order. Products for which replacement has been made under the provisions of this clause shall become the property
of BT. Under no circumstances are products to be returned to BT without BT’s prior written authorization. BT reserves the right
to scrap any unauthorized returns on a no-credit basis. Any actions for breach of this contract must be commenced by Buyer
within thirteen (13) months after the cause of action has accrued. A copy of BT’s standard terms and conditions of sale, including
the limited warranty, is available from BT upon request. Copies of the limited warranties covering third party proprietary sub-
assembly modules and private label products manufactured by third parties are also available from BT on request. VideoCipher®
& DigiCipher® are registered trademarks of Motorola Corp.
Rev 5/6/2009
Blonder Tongue Laboratories, Inc.
Limited Warranty
Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may
determine) any product manufactured by BT which proves to be defective in materials or workmanship or fails to meet the specifications which are
in effect on the date of shipment or such other specifications as may have been expressly agreed upon in writing (i) for a period of one (1) year from
the date of original purchase (or such shorter period of time as may be set forth in the license agreement specific to the particular software being
licensed), with respect to iCentral™ (hardware and software) and all other software products (including embedded software) licensed from BT, (ii) )
for a period of one (1) year from the date of original purchase, with respect to all MegaPort™, IPTV products, and fiber optics receivers, transmitters,
couplers and integrated receiver/distribution amplifiers (including TRAILBLAZER™, RETRO-LINX™ and TWIN STAR™ products) as well as for
DigiCipher ® satellite receivers, and (iii) for a period of three (3) years from the date of original purchase, with respect to all other BT products.
Notwithstanding the foregoing, in some cases, the warranty on certain proprietary sub-assembly modules manufactured by third-party vendors and
contained in BT products and on certain private–label products manufactured by third-parties for resale by BT are of shorter duration or otherwise
more limited than the standard BT limited warranty. In such cases, BT's warranty with respect to such third-party proprietary sub-assembly modules
and private-label products will be limited to the duration and other terms of such third-party vendor's warranty. In addition, certain products, that are
not manufactured but are resold by BT, carry the original OEM warranty for such products. The limited warranty set forth in this paragraph does not
apply to any product sold by BT, which at the time of sale constituted a Refurbished/Closeout Product.
(b) BT will at its sole option, either repair or replace (with a new or factory-reconditioned product, as BT may determine) any product sold by BT
which at the time of sale constituted a refurbished or closeout item (“Refurbished/Closeout Product”), which proves to be defective in materials or
workmanship or fails to meet the specifications which are in effect on the date of shipment or such other specifications as may have been expressly
agreed upon in writing, for a period of ninety (90) days from the date of original purchase. Notwithstanding the foregoing, in some cases the
warranty on third party software and on certain proprietary sub-assembly modules manufactured by third-party vendors and contained in BT products
and on certain private–label products manufactured by third-parties for resale by BT are of shorter duration or otherwise more limited than the BT
limited warranty for Refurbished/Closeout Products. In such cases, BT's warranty for Refurbished/Closeout Products constituting such third party
software, third-party proprietary sub-assembly modules and private-label products will be limited to the duration and other terms of such third-party
vendor's warranty. In addition, notwithstanding the foregoing, (i) certain Refurbished/Closeout Products that are not manufactured (but are resold)
by BT, carry the original OEM warranty for such products, which may be longer or shorter than the BT limited warranty for Refurbished/Closeout
Products. All sales of Refurbished/Closeout Products are final.
To obtain service under this warranty, the defective product, together with a copy of the sales receipt or other satisfactory proof of purchase and a
brief description of the defect, must be shipped freight prepaid to: Blonder Tongue Laboratories, Inc., One Jake Brown Road, Old Bridge, New
Jersey 08857.
This warranty does not cover damage resulting from (i) use or installation other than in strict accordance with manufacturer's written instructions, (ii)
disassembly or repair by someone other than the manufacturer or a manufacturer-authorized repair center, (iii) misuse, misapplication or abuse, (iv)
alteration, (v) lack of reasonable care or (vi) wind, ice, snow, rain, lightning, or any other weather conditions or acts of God.
OTHER THAN THE WARRANTIES SET FORTH ABOVE, BT MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF
ANY KIND, EXPRESS OR IMPLIED, AS TO THE CONDITION, DESCRIPTION, FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR AS TO ANY OTHER MATTER, AND SUCH WARRANTIES SUPERSEDE ANY ORAL OR WRITTEN
WARRANTIES OR REPRESENTATIONS MADE OR IMPLIED BY BT OR BY ANY OF BT’S EMPLOYEES OR
REPRESENTATIVES, OR IN ANY OF BT’S BROCHURES MANUALS, CATALOGS, LITERATURE OR OTHER MATERIALS. IN
ALL CASES, BUYER’S SOLE AND EXCLUSIVE REMEDY AND BT’S SOLE OBLIGATION FOR ANY BREACH OF THE
WARRANTIES CONTAINED HEREIN SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE
PRODUCT F.O.B. SHIPPING POINT, AS BT IN ITS SOLE DISCRETION SHALL DETERMINE. BT SHALL IN NO EVENT AND
UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL,
PUNITIVE, DIRECT OR SPECIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,
STRICT TORT LIABILITY OR OTHERWISE OR ANY OTHER LEGAL THEORY, ARISING DIRECTLY OR INDIRECTLY FROM
THE SALE, USE, INSTALLATION OR FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM BT.
All claims for shortages, defects, and non-conforming goods must be made by the customer in writing within five (5) days of receipt of merchandise,
which writing shall state with particularity all material facts concerning the claim then known to the customer. Upon any such claim, the customer
shall hold the goods complained of intact and duly protected, for a period of up to sixty (60) days. Upon the request of BT, the customer shall ship
such allegedly non-conforming or defective goods, freight prepaid to BT for examination by BT's inspection department and verification of the
defect. BT, at its option, will either repair, replace or issue a credit for products determined to be defective. BT's liability and responsibility for
defective products is specifically limited to the defective item or to credit towards the original billing. All such replacements by BT shall be made
free of charge f.o.b. the delivery point called for in the original order. Products for which replacement has been made under the provisions of this
clause shall become the property of BT. Under no circumstances are products to be returned to BT without BT's prior written authorization. BT
reserves the right to scrap any unauthorized returns on a no-credit basis. Any actions for breach of a contract of sale between BT and a customer must
be commenced by the customer within thirteen (13) months after the cause of action has accrued. A copy of BT's standard terms and conditions of
sale, including the limited warranty, is available from BT upon request. Copies of the limited warranties covering third-party proprietary sub-
assembly modules and private-label products manufactured by third-parties are also available from BT on request. DigiCipher ® is a registered
trademark of Motorola Corp. (Rev 0509)
Seller will at its sole option, either repair or replace (with a new or factory reconditioned product, as Seller may determine) any product manufactured or sold (or in
the case of software, licensed) by Seller which is defective in materials or workmanship or fails to meet the applicable specifications that are in effect on the date of
shipment or such other specifications as may have been expressly agreed upon in writing: (i) for a period of three (3) years from the date of original purchase for all
stock hardware products (other than those specifically referenced herein below having a shorter warranty period); (ii) for a period of one (1) year from the date of
original purchase, with respect to all MegaPort™, IPTV products, test equipment and fiber optics receivers, transmitters, couplers and integrated receiver/distribution
amplifiers; (iii) for a period of one (1) year from the date of original purchase (or such shorter period of time as may be s et forth in the license agreement specific to
the particular software being licensed from Seller) with respect to all software products licensed from Seller (other than Co re Product Software) that is (a) developed
for a specific function or application, (b) complimentary to and does not function without the Core Product Software, and (c) listed with a specific model number and
stock number in Seller’s Price List (“Non-Core Software”); (iv) for a period of ninety (90) days from the date of original purchase, with respect to non-serialized
products and accessories, such as parts, sub-assemblies, splitters and all other products sold by Seller (other than Core Product Software and Refurbished/Closeout
Products) not otherwise referred to in clauses (i) through (iii) above. The warranty period for computer programs in machine-readable form included in a hardware
product, which are essential for the functionality thereof as specifically stated in the published product specifications (“ Core Product Software”) will be coincident
with the warranty period of the applicable hardware product within which such Core Product Software is installed.
Software patches, bug fixes, updates or workarounds do not extend the original warranty period of any Core Product Software o r Non-Core Software.
Notwithstanding anything herein to the contrary,
(i) Seller’s sole obligation for software that when properly installed and used does not substantially conform to the publish ed specifications in effect when the
software is first shipped by Seller, is to use commercially reasonable efforts to correct any reproducible material non-conformity (as determined by Seller in its sole
discretion) by providing the customer with: (a) telephone or e-mail access to report non-conformance so that Seller can verify reproducibility, (b) a software patch or
bug fix, if available or a workaround to bypass the issue if available, and (c) where applicable, replacement or damaged or defective external media, such as CD-ROM
disk, on which the software was originally delivered;
(ii) Seller does not warrant that the use of any software will be uninterrupted, error-free, free of security vulnerabilities or that the software will meet the customer’s
particular requirements; and the customer’s sole and exclusive remedy for breach of this warranty is, at Seller’s option, to receive (a) suitably modified software, or
part thereof, or (b) comparable replacement software or part thereof;
(iii) Seller retains all right, title and interest in and to and ownership of all software (including all Core Pro duct Software and Non-Core Software) including any and all
enhancements, modifications and updates to the same; and
(iv) in some cases, the warranty on certain proprietary sub-assembly modules manufactured by third-party vendors and contained in Seller’s products, third party
software installed in certain of Seller’s products, and on certain private–label products manufactured by third-parties for resale by Seller, will be of shorter duration
or otherwise more limited than the standard Seller limited warranty. In such cases, Seller's warranty with respect to such third-party proprietary sub-assembly
modules, third-party software and private-label products will be limited to the duration and other terms of such third-party vendor's warranty, if any. In addition,
certain products, that are not manufactured by Seller, but are resold by Seller, may carry the original OEM warranty for such products, if any. The limited warranty
set forth above does not apply to any product sold by Seller, which at the time of sale constituted a Refurbished/Closeout Product, the limited warranty for which is
provided in the following paragraph.
Seller will at its sole option, either repair or replace (with a new or factory-reconditioned product, as Seller may determine) any product sold by Seller which at the
time of sale constituted a refurbished or closeout item (“Refurbished/Closeout Product”), which is defective in materials or workmanship or fails to meet the
applicable specifications that are in effect on the date of shipment of that product or fails to meet such other specifications as may have been expressly agreed upon
in writing between the parties, for a period of ninety (90) days from the date of original purchase. Notwithstanding the for egoing, in some cases the warranty on
certain proprietary sub-assembly modules manufactured by third-party vendors and contained in Seller products, third party software installed in certain of Seller’s
products, and on certain private–label products manufactured by third-parties for resale by Seller will be of shorter duration or otherwise more limited than Seller
limited warranty for Refurbished/Closeout Products. In such cases, Seller's warranty for Refurbished/Closeout Products const ituting such third party proprietary
sub-assembly modules, third party software, and private-label products will be limited to the duration and other terms of such third-party vendor's warranty, if any.
In addition, notwithstanding the foregoing, (i) certain Refurbished/Closeout Products that are not manu factured (but are resold) by Seller, may carry the original OEM
warranty for such products, if any, which may be longer or shorter than Seller’s limited warranty for Refurbished/Closeout Pr oducts. All sales of
Refurbished/Closeout Products are final.
To obtain service under this warranty, the defective product, together with a copy of the sales receipt, serial number if applic able, or other satisfactory proof of
purchase and a brief description of the defect, must be shipped freight prepaid to Seller at the following address: One Jake Brown Road, Old Bridge, New Jersey
08857.
This warranty does not cover failure of performance or damage resulting from (i) use or installation other than in strict acc ordance with manufacturer's written
instructions, (ii) disassembly or repair by someone other than the manufacturer or a manufacturer-authorized repair center, (iii) misuse, misapplication or abuse, (iv)
alteration, (v) exposure to unusual physical or electrical stress, abuse or accident or forces or exposure beyond normal use within specified operational or
environmental parameters set forth in applicable product specifications, (vi) lack of reasonable care or (vii) wind, ice, sno w, rain, lightning, or any other weather
conditions or acts of God.
OTHER THAN THE WARRANTIES SET FORTH ABOVE, SELLER MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND, EXPRESS OR IMPLIED, AS
TO THE CONDITION, DESCRIPTION, FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR AS TO ANY OTHER MATTER, AND SUCH WARRANTIES
SET FORTH ABOVE SUPERSEDE ANY ORAL OR WRITTEN WARRANTIES OR REPRESENTATIONS MADE OR IMPLIED BY SELLER OR BY ANY OF SELLER’S
EMPLOYEES OR REPRESENTATIVES, OR IN ANY OF SELLER’S BROCHURES MANUALS, CATALOGS, LITERATURE OR OTHER MATERIALS. IN ALL CASES, BUYER’S
SOLE AND EXCLUSIVE REMEDY AND SELLER’S SOLE OBLIGATION FOR ANY BREACH OF THE WARRANTIES CONTAINED HEREIN SHALL BE LIMITED TO THE
REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT F.O.B. SHIPPING POINT, AS SELLER IN ITS SOLE DISCRETION SHALL DETERMINE. SELLER SHALL IN
NO EVENT AND UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, PUNITIVE, DIRECT OR SPECIAL
DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT LIABILITY OR OTHERWISE OR ANY OTHER LEGAL
THEORY, ARISING DIRECTLY OR INDIRECTLY FROM THE SALE, USE, INSTALLATION OR FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM SELLER.
All claims for shortages, defects, and non-conforming goods must be made by the customer in writing within five (5) days of receipt of merchandise, which writing
shall state with particularity all material facts concerning the claim then known to the customer. Upon any such claim, the customer shall hold the goods complained
of intact and duly protected, for a period of up to sixty (60) days. Upon the request of Seller, the customer shall ship such allegedly non-conforming or defective
goods, freight prepaid to Seller for examination by Seller's inspection department and verification of the defect. Seller, at its option, will either repair, replace or issue
a credit for products determined to be defective. Seller's liability and responsibility for defective products is specificall y limited to the defective item or to credit
towards the original billing. All such replacements by Seller shall be made free of charge f.o.b. the delivery point called for in the original order. Products for which
replacement has been made under the provisions of this clause shall become the property of Seller. Under no circumstances are products to be returned to Seller
without Seller's prior written authorization. Seller reserves the right to scrap any unauthorized returns on a no-credit basis. Any actions for breach of a contract of
sale between Seller and a customer must be commenced by the customer within thirteen (13) months after the cause of action has accrued. A copy of Seller's
standard terms and conditions of sale, including the limited warranty, is available from Seller upon request. Copies of the l imited warranties covering third-party
proprietary sub-assembly modules and private-label products manufactured by third-parties may also be available from Seller on request. (Rev 0713)
Table of contents
Other Blonder tongue Modulator manuals
Blonder tongue
Blonder tongue ZFMSM User manual
Blonder tongue
Blonder tongue BAVM-860SAW User manual
Blonder tongue
Blonder tongue HDE-2S-IP User manual
Blonder tongue
Blonder tongue AM-60-550 User manual
Blonder tongue
Blonder tongue AQM Series User manual
Blonder tongue
Blonder tongue MDDM-860 User manual
Blonder tongue
Blonder tongue FA1M-50-860 User manual
Blonder tongue
Blonder tongue MIDM-806C User manual
