BLOO LOC yB-010050-WT User manual

P a g i n a | 1
MANUAL | yooBee Wrist Tracker yB-010050-WT
USER MANUAL
YOOBEE WRIST TRACKER
yB-010050-WT

P a g i n a | 2
MANUAL | yooBee Wrist Tracker yB-010050-WT
TABLE OF CONTENTS
Table of contents...................................................................................................................................................... 2
1. General information ....................................................................................................................................... 3
2. Getting started ................................................................................................................................................. 3
3. Using the device .............................................................................................................................................. 5
4. Troubleshooting............................................................................................................................................... 5
5. Disposal of the device ................................................................................................................................... 5
6. Safety Instructions........................................................................................................................................... 5
7. Technical Specifications ................................................................................................................................ 6
8. Declaration of Conformity............................................................................................................................ 6

P a g i n a | 3
MANUAL | yooBee Wrist Tracker yB-010050-WT
1. General information
yooBee Wrist Trackers are used to track the position of people with an accuracy of up to 1-2
meter. The yooBee Wrist Tracker is a small, lightweight and water resistant device that is worn
on a wrist. It is powered with a replaceable coin cell battery that offers approximately two years
lifetime with a position update once per second, assuming 8 hours of activity per day.
The yooBee Wrist Tracker features:
•NFC for identification or access control purposes. Custom RFID tags can be added
on demand.
•Push button to signal events, such as a call for assistance
•Multicolor LED for troubleshooting
•Inertial sensors: Accelerometer, magnetometer
•Barometric pressure sensor (optional)
•Wear detection (optional)
yooBee Trackers are remotely managed through the cloud console for configuration, over-the-
air updates, battery status monitoring and event logging.
2. Getting started
yooBee Trackers are by default in “Transport mode”, which is a deep sleep mode to preserve
battery life time during shipping. Before using the tracker, the device must be switched ON via
NFC by means of the yooBee Toolbox smartphone app.
To switch on the device, tap the “SWITCH ON” button and hold the device close the NFC
antenna of your smartphone.

P a g i n a | 4
MANUAL | yooBee Wrist Tracker yB-010050-WT
The yooBee Toolbox app can be downloaded from the “Admin” section on the Cloud Console.
Log into the Cloud Console from your smartphone, click on the “Admin” tab and select the
Account sub-tab. When clicking on “Download Tools App” link, *.apk files are downloaded on
your smartphone to install the yooBee Toolbox app.
the yooBee Toolbox app is only available for Android
Before the device can be tracked, it has to be properly configured in the yooBee Cloud Console.
This can be done by means of the yooBee Toolbox app or directly in the Cloud Console (see
the yooBee Cloud Console User Manual).
Note: Switching off the operational mode is equivalent to putting the device in Transport
Mode.

P a g i n a | 5
MANUAL | yooBee Wrist Tracker yB-010050-WT
3. Using the device
In operational mode, the tracker is active and connected to at least one and up to three yooBee
Hubs. It periodically broadcasts data from its inertial sensors, which is used in the Cloud
Console to track the position of the device.
If no movement was detected in the last 15 sec, the tracker goes into a sleep mode to preserve
battery life time. It is re-activated as soon as movement is detected.
In the background, the device runs protocols to establish and maintain connection with yooBee
Hubs in its proximity, and to roam between them.
The yooBee Wrist Tracker has a multi-colored LED, that is used to provide feedback in case of
a call-for-assistance:
LED Code
Meaning
Series of short blue blink
Firmware update
1x red after firmware update blue blinks
Firmware update failed
Red - blinking
Attempt to send button event
Green
Button event sent and acknowledged
4. Troubleshooting
In case of possible malfunction, please contact technical support to receive proper
replacements (email: [e-mail]). Replacement policy also applies to performance
faults caused by low battery before prescribed operation time.
5. Disposal of the device
yooBee Wrist Trackers contain electronic elements and batteries which should be properly
disposed and compliant to local regulations.
6. Safety Instructions
Opening yooBee Wrist Trackers is strictly forbidden. Switching the original battery with one of
a different type might cause a risk of explosion.

P a g i n a | 6
MANUAL | yooBee Wrist Tracker yB-010050-WT
7. Technical Specifications
Technical Specification
Dimensions
47,4 mm x 36,2 mm x 13,1 mm
(wristband opening 20 mm
wide)
Operational
Temperature
-20°C to +60°C
Weight
22 g
Storage Temperature
-25°C to +70°C
Radio
•NFC Forum Type 4,
ISO/IEC14443
•2.4 GHz BLE 0dBm TX power
Sensor
•Ambient temperature
•Inertial and magnetic
field sensor
•Push button
•Barometric pressure
sensor (optional)
•Wear detection
(optional)
Power Supply
CR2032 3V replaceable lithium
cell battery (expected lifetime 2
years)
Material
•Reinforced polyamide
•UV-light resistant
•Zero outgassing
Update Rate
1 per second
Options
Wristband (not included in
standard offer)
Certifications
CE, FCC, ISED
8. Declaration of Conformity
CE Statements
This product complies with the essential requirements of Radio Equipment Directive (RED)
2014/53/EU. The Declaration of Conformity can be found in the yooBee documentation on
www.blooloc.com
FCC Statements
FCC § 15.19 Labelling requirements
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC § 15.21 Information to user
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC §15.105 statement

P a g i n a | 7
MANUAL | yooBee Wrist Tracker yB-010050-WT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Requirements
To comply with FCC RF exposure compliance requirements, the device must be installed to
provide a separation distance of at least 20 cm from all persons.
INDUSTRY CANADA Statements
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Canada Class B statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
RF Exposure Requirements
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.