Blowback Laser Trainer User manual

OWNERS MANUAL

Target Scoring
EJECTING / INSTALLING CO2 CARTRIDGE
MAGAZINE, BATTERY AND CHARGER
BLOWBACK LASER TARGET
PRODUCT FEATURES
BLOWBACK LASER TARGET
Target
Scoring
Score
Display
Score
Reset
Game
Mode
Switch
For Best Results,
Avoid Direct Sunlight
1. Press ejection button on the Blowback Laster Trainer™ to eject the magazine.
2. Once magazine is ejected, remove the rubber cap from the bottom of magazine.
3. Using the wrench provided, turn the screw counter clockwise to expose cartridge
opening. Insert new 12g CO2 cartridge with small neck of cartridge pointing upward into
opening of magazine place screw over inserted cartridge and turn clockwise until you
feel it pierce the cartridge (screw goes in at an angle, same as magazine).
4. Once the screw is tightened, place rubber cap over the bottom of the magazine and
re-insert the magazine back into the Blowback Laser Trainer™ (see more detailed
instructions included in the carry case, or the help section of our website).
Your Blowback Laser Trainer™ has a removable magazine and is equipped with a mini
USB charging port that is located at the bottom of the magazine under the rubber cover.
1. Remove magazine from the Blowback Laser Trainer™.
2. Remove rubber cover.
3. Plug mini-USB cord into bottom of the magazine, Plug mini-USB cord into bottom of
the magazine and one of the following things will occur. A. Flashing light indicates
magazine needs to be charged B. Solid light indicates magazine is charging and C. Light
off indicates the magazine is fully charged. Allow 8 hours to fully charge battery.
4. A fully charged battery will deliver approximately 5 hours of operation.
5. Once your battery is charged, unplug and place rubber cap over the magazine
and re-insert magazine into Blowback Laser Trainer™.
Turn the off/ on switch located on the right hand side of the Blowback Laser Target upward
to the on position.
The target has 2 modes of operation: Timed and Score. The mode switch is located at the
bottom left hand front of the target.
1) Timed Mode: The LED at bottom of target will start a countdown from 10 to 0, this
countdown prepares shooter for a timed round. When the countdown clock reaches 3 the
blue shoot light will begin to flash giving the shooter a 3 second warning before the round
begins. Once round begins the shooter has 10 seconds to accumulate highest possible
score. When the 10-second round is completed the total score will flash on LED screen. To
reset and play another round, shoot laser at the reset screen located at the bottom left hand
front of the target and a new round will start.
2) Score Mode: Switch game button to Score Mode blue light will appear. The shooter has
13 shots to accumulate scoring points. Once the 13 shots have been completed the LED will
flash the total score. To reset and play another round, shoot laser at the reset button located
at the bottom left hand front of the target and a new round will start.
Charging your Blowback Laser Target
Your target is equipped with a Mini-USB charging port located under the on/off switch. Allow
12 hours to fully charge target. Plug the USB cord into the target and a yellow light will
illuminate until fully charged. A fully charged battery will deliver approximately 72 hours of use.
Shoot/
Charging
Light
Speaker
On / Off
Switch
USB
Charging
Port
Your Blowback Laser Trainer™ requires special tools and fixtures to repair it. Any disassembly or
modification not performed by Blowback Laser Trainer technicians will void any warranty.
90 Day Limited Warranty
This product is warranted for 90 days from the date of purchase against defects in material and
workmanship and the warranty is not transferable.
What is Covered?
Replacement parts and labor.
What is Not Covered?
Return shipping charges to Blowback Laser Trainer are the responsibility of the customer.
Warranty Claims
Warranty claims and repairs can only be addressed on our website, www.blowbacklasertrainer.com,
and filling out a return authorization form. If it is determined a return is necessary, you will be issued a
return authorization number Return the product along with your return authorization number to
Rustbelt Industries LLC, P.O. Box 93062 - 1150, Simi Valley, CA 96062- 1150.
Maintenance
1. To keep the Blowback Laser Trainer™ properly lubricated, it is recommended to place one drop
of synthetic oil into the air hole at the top of the magazine after every 1,000 shots.
2. To ensure the pinch valve located inside magazine stays lubricated, place one drop of synthetic
motor oil on the top of the CO2 cartridge every ten cartridges.
Service
Do not return defective or damaged product to the dealer. If your Blowback Laser product needs repair,
visit our website www.blowbacklsaertrainer.com and go to the Company section, select the Warranty tab
and fill out the return authorization form. The components of the Blowback Laser Trainer products are
engineered and manufactured to deliver optimum performance, any modifications or tampering with the
Blowback Laser Trainer™ may cause malfunction, void your warranty and may make it unsafe to use.
WARRANTY / MAINTENANCE / SERVICE