Blue Blower Professional BB-AP800-59-W-WF User manual

Air Purifier
USER MANUAL
BB-AP800-59-W-WF

Contents
1. Important safety information
2. Product Structure
3. Before first use
4. Instructions for use
5. Filter Replacement
6. Troubleshooting
7. Warranty
01
04
05
10
16
19
20

1. Important safety information
● Check if the voltage indicated on the bottom of the appliance corresponds to the
local mains voltage before you connect the appliance.
● If the mains cord is damaged, you must have it replaced by distributor, or a
service center authorized by distributor or similarly qualified persons in order to
avoid a hazard.
● Do not use the appliance if the plug, the mains cord or the appliance itself is
damaged.
● This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
● Children should be supervised to ensure that they do not play with the appliance.
● Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in
front of the air inlet.
Read this user manual carefully before you use the appliance and save it for future
reference.
● Do not let water or any other liquid or flammable detergent enter the appliance to
avoid electric shock and/or a fire hazard.
● Do not clean the appliance with water or any other liquid or a (flammable) deter-
gent to avoid electric shock and/or a fire hazard.
Danger
Warning
01

● This appliance is not a substitute for proper ventilation, regular vacuum cleaning
or use of an extractor hood or fan while cooking.
● If the wall socket used to power the appliance has poor connections, the plug of
the appliance becomes hot. Make sure you plug the appliance into a properly
connected wall socket.
● Always place and use the appliance on a dry, stable, level and horizontal surface.
● Leave at least 40cm free space behind and on both sides of the appliance and
leave at least 40cm free space above the appliance.
● Do not place anything on top of the appliance and do not sit on the appliance.
● Do not place the appliance directly below an air conditioner to prevent condensa-
tion from dripping onto the appliance.
● Make sure all filters are properly installed before you switch on the appliance.
● Only use the original filters specially intended for this appliance. Do not use any
other filters.
● Avoid knocking against the appliance (the air inlet and outlet in particular) with
hard objects.
● Always lift or move the appliance by the handle at the back of the appliance.
● Do not insert your fingers or objects into the air outlet.
● Do not use this appliance when you have used indoor smoke-type insect repel-
lents or in places with oily residues, burning incense or chemical fumes.
● Do not use the appliance near gas appliances, heating devices or fireplaces.
● Always unplug the appliance after use and before you clean it.
● Do not use the appliance in a room with major temperature changes, as this may
cause condensation inside the appliance.
● The appliance is only intended for household use under normal operating condi-
tions.
● Do not use the appliance in wet surroundings or in surroundings with high ambi-
ent temperatures, such as the bathroom, toilet or kitchen.
● The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot
be used as a safety device in case of accidents with combustion processes and
hazardous chemicals.
● To prevent is interference , should be kept at least 2 meters distance between the
product and the use of radio waves electrical.
Caution
02

FCC NOTE: Reminding of part 15
This device complies with part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more
should be maintained between the antenna of this device and persons during device
operation.
To ensure compliance, operations at closer than this distance is not recommended.
03

2. Product Structure
9
① Air Outlet
② Touch Panel
③ Digital Display
④ Composite Filter
⑤ Pre-Filter
⑥ Filter Cover
⑦ Dust Sensor
⑧ Power Supply Inlet
⑨ Wheel
A1: Temperature(℃)
A2: Humidity (%RH)
A3: WIFI icon
A4: PM2.5 data
A5: PM2.5 icon
A6: PM2.5 unit icon
A7: "Filter life" icon
A8: Filter life indicator
Description for the function of display panel
A1A2
A3
A5
A7
A4
A6
A8
04

3. Before first use
Read this user manual carefully before you use the appliance and save it for future
reference.
3.1 Learn about the air purifier indicator
Air Quality Indicator
3.2 Filter cover disassembly and installation method
Reminder:Air quality is not displayed in standby mode considering standby power
consumption.
In the first 10 seconds after the dust sensor is started, the PM2.5 data window shows
"-- --", which is in the process of collecting data.
3.2.1 Disassembly method
Press the “ ” icon on the filter cover
with both hands, the filter cover will pop up
and the filter cover will be pulled up
slightly.
05

Reinstall the filter cover: align and insert
the fixed groove, and apply pressure on
the “ ” icon on the filter cover to secure
the filter cover.
3.3 Filter installation
Steps
[1] Remove all packaging materials and
place the machine on a dry, stable, level
surface.
[2] Press the “ ” icon on the filter cover
with both hands, spread the filter cover,
and pull the filter cover up slightly.
3.2.2 Installation method
All filters are included inside the air purifier, but be sure to remove the filter before using
the product. Follow the instructions below to remove all filters and remove their
packaging, then put them back in the purifier.
For the first time using, please follow the steps below to properly install the filter.
06

[6] Reinstall the filter cover, align and
insert the fixed groove, then apply
pressure on the “ ” icon on the filter
cover to secure the filter cover.
[3] Pull out the filter inside the purifier.
[4] Remove all packaging materials from
the filter.
[5] Put the filter back in the purifier.
[7] Repeat the above steps to assemble the air purifying screen on the other side of
the product.
07

3.4 Filtering effect
3.4.1
■ Combine multiple functions into one
■ Efficient purification of PM2.5, smoke, pollen and other
particulate pollutants
■ Reduce formaldehyde
■ 5 speed design
■ Timing setting
■ Filter replacement indicator
■ Configured with manual, auto and sleep modes
■ PM2.5/ temperature and humidity data real-time display
■ Air quality indicator ring
Clean air output
[note] The pictures are for reference only. If there is any difference between the actual objects and the
pictures, please refer to the actual product, the company reserves the right to interpret.
Polluted
air
entering
Polluted
air
entering
08

3.4.2 Unique 5-fold purification technology
Pre-filter Interception of hair, Fiber velvet, large particles, dander and so
on
Effectively purify PM2.5, smoke, pollen and other particulate
pollutants
It adopts high quality activated carbon, modified by special
proprietary technology, and purifies formaldehyde and other gas
pollutants efficiently
High Efficiency HEPA
High Efficiency
Activated Carbon
[Note] the highly effective antibacterial layer, highly effective activated carbon and highly effective HEPA
are combined in the same filter mesh.
Pre-filter
High
Efficiency
Activated
Carbon
High
Efficiency
HEPA
09

4. Instructions for use
4.1 Control panel function description
4.2 Plug in the power supply
4.3 Turn on the air purifier
Reminder:In standby mode, the dust sensor is off.
To turn off the machine, unplug the product from the power cord in standby mode.
Note:When the machine is turned on, the default mode is working, the fan speed is in the
automatic mode, the negative ion mode is on, the temperature and humidity sensor starts
working,and the air quality indicator lights up.
■ On/Off
■ Key Lock
■ WiFi
■ Filter Replacement Indicator
■ Fan speed (1/2/3/4/Auto Mode/Sleep
Mode)
The LED on the control panel will be on for 1 second, and you will hear a click, then the
indicator will be extinguished again and enter standby mode.
In the standby state, touch the “ ” button to enter
the working state.
In the working state, touch the “ ” button to enter
the standby state.
1
2 3
4
5
10

In the working state, touch the round button of “ ” icon
to enter the timed shutdown setting state, the time is 8h,
and the corresponding indicator lights up; touch the round
button again, the timed shutdown setting is closed, and
indicator lights down.
When use APP set the countdown, there are 2H / 4H / 6H/
8H / 10H / 12H countdown for selection. When any gear is
selected, the countdown icon indicator light on the machine
will be on. If you press cancel, the countdown will be turned
off and the machine indicator light will be off.
Under working mode, when the Auto button is pressed, the automatic mode is activat-
ed, and the purifier senses the air quality through the dust sensor, thereby adjusting the
fan speed of the purifier.
4.5 Automatic mode
4.6 Sleep mode
4.7 Timer
4.4 Fan speed adjustment
In the working state, touch the ring area (the area
corresponding to the function icon) and enter the
manual fan speed setting. Choose the wind fan
between "1/2/3/4/Auto Mode/Sleep Mode". When
the corresponding mode is selected, the indicator
light will be blue with sound prompt.
When you touch the “ ” key in the corresponding circular area under working state,
the sleep indicator lights up, and the machine enters the sleep mode: “ ” and “ ”
indicator lights are half on, negative ion energy is turned off, other indicator lights are
all off, and air quality indicator lights are off. Sleep mode, “ ” can operate
independently, can open or close, corresponding to the indication of semi-on or off. In
the sleep mode, the negative ion or sleep mode as the starting point to slide the ring
touch area, then exit the sleep mode, return to the normal working mode. (press the
“ ” button and it will not respond.) In sleep mode, press the “ ” button to turn
off the machine.
11
AQ le vel
AQ Col o r
Speed mode
Blu e Gr ee n Re d
1(Low) 2(Medi um)4(Hi gh )
Good Unhealthy Hazardous

The filter life is defined as 2160 hours. When the
filters have been running for 2160hours, the replace-
ment filter indicator light starts to flash, reminding the
user that the filter needs to be replaced and that the
filter life need to be reset.
In the working state, when the replacement filter
indicator light flashes, long press the “ ” button
for 3 seconds, the flashing indicator light is off, and
the button is accompanied by the buzzer “Bee”, the
filter life is reset successfully.
Reminder:The remaining time of filter life is more than 432 hours, and the filter life
progress light is always white. The remaining time of filter life is less than 432 hours, and
the filter life progress light turns red and stays on. When the remaining time of filter life is
zero, the filter life progress light flashes red, and the indicator light flashes when replacing
the filter life.
4.9 Filter replacement Mode
4.10 Connect to WiFi
Press and hold the “ ” button for 3 seconds in
the working state to activate the Keylock mode. At
this time, pressing the other buttons will not respond.
The KeyLock indicator flashes 2 times to remind the
user to unlock; long press the “ ” button for 3
seconds, the touch panel can be unlocked and the
Keylock indicator is off, other keys can be operated
normally.
At the standby mode, long press for 5 seconds,
when indicator light flashes , then enter WiFi
network pairing mode. Please connect your smart phone
to WiFi and operate it according to following steps.
Note: If purifier has been successfully connected to
WiFi, indicator will stay on.
4.8 Keylock mode
12
Scan QR code to
download the APP.

13
01 Register account or Log in with
existing account.
03
02 Add device.
Click “Small Home Appliances”,
01
02
03
Then choose “Air Purifier”.

14
05 Click Finish network
configuration.
04 Input wifi password.
05
04
06
06 Connecting.

15
07
07 Device added
successfully.
4.12 Clean air purifier
Regularly clean the inside and outside of the body to prevent dust from
collecting on the inside and outside.
1). Wipe away dust with a soft dry cloth from the body of the purifier.
2). Clean the air inlet and the air outlet with a soft dry cloth.
Note :
●Always unplug the purifier before you clean it.
● Never immerse the purifier in water or any other liquid.
● Never use aggressive or flammable cleaning agents such as bleach or
alcohol to clean any part of the purifier.
● The HEPA filter is NOT washable.

5. Filter replacement
5.1 Steps
Note:When the filter replacement indicator is lit and the buzzer sounds awkward, the
user is reminded that the new filter needs to be replaced, but the purifier can still work
normally.
Note:Please turn off the power and cut off the power plug before replacing the filter.
Reminder:Remove the plastic packaging of each filter before placing it in the machine.
Make sure the label on the side of the filter is facing up.
When the product's filter replacement indicator lights up and flashes, the user is
suggested to replace the filter.
When the replacement filter indicator lights up, the customer is suggested to replace
the filter.
[1] The machine reminds customer to
replace the filter.
[2] Turn off the air purifier, then unplug the
power plug.
16

[3] Press the “ ” button on the filter
cover with both hands, spread the filter
cover, and pull the filter cover up slightly.
[4] Remove the purifier insider filter.
[5] Remove all packaging materials from
the new filter.
[6] Load a new filter.
17

[8] Repeat the above steps and replace
the air purification screen on the other side
of the product.
After replacing the new filter, plug in the
power plug and press the “ ” button for
3 seconds to reset the filter life. When the
indicator is off means filter reset is
complete.
Note:Please turn off the power and cut off the power plug before replacing the filter.
Unplug the power plug. (because standby also consumes power).
Dry the inside thoroughly.
Store the machine in a dry and ventilated place for safekeeping (flat or inverted
safekeeping of the product may cause product failure).
5.2 Long idle time
The service cycle of compound filter net is 2160 hours commonly, suggest periodic use
wool brush or cleaner clean the dirt on filter net. Do not wash or damage the filter
screen. Do not press hard.
The above time is only a reference time, users can according to the actual use of the
environment in advance to replace.
5.3 The reference time for replacing the filter screen
[7] Reinstall the filter cover, align and
insert the fixed groove, and then press the
button on the filter cover to apply pressure
to secure the filter cover.
18