Blue Diamond Extreme Duty 2 Series User manual

Operation and Maintenance Manual
Heavy Duty Series 2
Brush Cutter
888-376-7027 | BlueDiamondAttachments.com
Register your
WARRANTY
within 30 days
of purchase
103007 & 103012

Blue Diamond® Attachments2
Thank you for your decision to purchase a Blue Dia-
mond® Heavy Duty Series 2 Brush Cutter. To ensure
maximum performance of your equipment, it is manda-
tory that you thoroughly study the Operator’s manual
and follow the recommendations. Proper operation and
maintenance are essential to maximize equipment life
and prevent personal injury.
Operate and maintain this equipment in a safe man-
ner and in accordance with all applicable local, state,
and federal codes, regulations and /or laws. Follow all
on-product labeling and instructions.
Make sure that all personnel have read this Operator’s
Manual and thoroughly understand safe and correct
operating, installation and maintenance procedures.
Blue Diamond is continually working to improve its
products. Blue Diamond reserves the right to make any
improvements or changes as deemed practical and pos-
sible without incurring any responsibility or obligation
to make any changes or additions to equipment sold
previously.
Although great care has been taken to ensure the
accuracy of this publication, Blue Diamond makes no
warranty or guarantee of any kind, written or expressed,
implied or otherwise with regard to the information
contained within this manual. Blue Diamond assumes
no responsibility for any errors that may appear in this
manual and shall not be liable under any circumstances
for incidental, consequential or punitive damages in con-
nection with, or arising from the use of this manual.
Keep this manual available for frequent reference. All
new operators or owners must review the manual before
using the equipment and annually thereafter. Contact
your Blue Diamond Attachments Dealer for assistance,
information, or additional copies of the manual. Contact
www.bluediamondattachments.com or call 888-376-
7027 for a complete list of dealers in your area.
Serial Number Location:
Please record attachment information in the space pro-
vided for future reference.
Model Number:_____________________________
Serial Number: _____________________________
Dealer Name: ______________________________
Dealer Number:_____________________________
Date of Purchase:___________________________
The serial number plate is located on the left side of the
attachment, just forward of the mounting plate.
Always use your serial number when requesting infor-
mation or when ordering parts.
NOTE: The directions left, right, front and rear, as
mentioned throughout this manual, are as viewed from
the operator’s position.
Introduction: Owner Information
Revision Date: 11.09.2022

3Blue Diamond® Attachments
Table of Contents
1. Safety ............................................................................................4-5
2.1 General Safety Information.....................................................4
2.2 Qualified Operators................................................................ 5
2. Operation .................................................................................. 6-10
2.1 Attachment Installation........................................................... 6
2.2 Brush Cutter Operation ......................................................... 8
2.3 Inspection Schedule............................................................... 9
3. Parts............................................................................................11-14
3.1 Direct Drive Spindle.................................................................11
3.2 Blade Assembly Breakdown ...............................................13
3.3 Warning Decal Placement....................................................14
4. Specifications ...............................................................................15
4.1 Torque Specifications.............................................................15
5. Warranty ........................................................................................ 17

Blue Diamond® Attachments4
1.1 General Safety Information Safety Requirements
• Read and follow instructions in this manual
and the machine’s Operators Manual before
operating.
• The manual must always remain with the
machine. In case of loss or damage, request
a new copy from your dealer or from Blue
Diamond.
• Strictly follow all rules prescribed by the safety
pictograms/decals applied to the machine.
Ensure that all safety pictograms/decals are
legible. If pictograms/decals are worn, they
must be replaced with new ones obtained
from Blue Diamond and placed in the position
indicated by this manual.
• Before using the machine, make sure that
all safety devices are installed and in good
working conditions. In case of damage or
shields, replace them immediately.
• It is absolutely forbidden to remove or alter
safety devices.
• Before starting, and during operation of the
attachment, make sure there are no people
or animals in the operation area; the machine
can project material from the back with risks of
serious injury or death.
• Pay maximum attention to avoid any accidental
contact with rotating parts of the machine.
• Do not operate the attachment or machine
while wearing loose fitting clothing that can be
entangled or caught in parts of the machine.
• Do not operate the implement when tired,
in poor condition, or under the influence of
alcohol or drugs.
1. Safety
CAUTION
The signal word CAUTION on the machine and
in the manuals indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury. It may also be used to alert
against unsafe practices.
WARNING
The signal word WARNING on the machine and
in the manuals indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
DANGER
The signal word DANGER on the machine and
in the manuals indicates a hazardous situation
which, if not avoided, will result in death or serious
injury.
SAFETY ALERT SYMBOL
This SAFETY ALERT SYMBOL identifies important
safety messages on the equipment and in the
owner’s manual. When you see this symbol, be
alert to the possibility of personal injury and
carefully read the message that follows.
IMPORTANT
The signal word IMPORTANT identifies
procedures which must be followed to avoid
damage to the machine.

5Blue Diamond® Attachments
Safety Requirements
• During operation, adjustment, maintenance,
repairing, or transportation of the machine, the
operator must always use appropriate Personal
Protective Equipment (PPE) including but not
limited to safety glasses, gloves, and hearing
protection.
NOTE: Additional safety equipment may be
required depending on the operating environment
and worksite conditions.
• It is the responsibility of the operator to follow
all local, state, and federal safety regulations.
Improper use of this equipment may result
in personal injury, property damage, and/or
damage to the equipment.
NOTE: Fasten the safety chain to your machine tie
down brackets with very little slack. This is usually
below the front of the cab between the front
wheels.
Modifications
Any modifications made to this equipment may
void any warranty and relieve the manufacturer of
liability of any resulting injury or damage.
1.2 Qualified Operators
Safe Operation Needs a Qualified
Operator
Operator Training
• Check the rules and regulations at your
location. The rules may include an employer’s
work safety requirements. Regulations may
apply to local driving requirements or use
of a Slow Moving Vehicle (SMV) emblem.
Regulations may identify a hazard such as a
utility line.
1. Safety
AVOID SERIOUS INJURY OR DEATH
Operators must receive instructions before
operating the machine. Untrained operators can
cause serious injury or death.
For an operator to be qualified, he or she must
not use drugs or alcoholic drinks which impair
alertness or coordination while working. An
operator who is taking prescription drugs must
get medical advice to determine if he or she can
safely operate a machine and the equipment.
For an operator to be qualified, he or she must
have read and understood the instructions of
this manual, he or she must make adequate
preparation for the proper use of the machine,
and he or she must hold a driving license.
In case of doubt regarding the use of the machine
and/or the interpretation of this manual, the
operator must contact either their dealer or Blue
Diamond.
DANGER
DANGER
AVOID SERIOUS INJURY OR DEATH
Do not raise the back of the cutter more than 12”
o the ground while operating the attachment.
Raising the cutter during operation may result in
serious injury or death.

Blue Diamond® Attachments6
2.1 Attachment Installation
Entering The Operator’s Position
Use the attachment safety treads, handles and
steps (on the machine) to enter the operator’s
position.
When in the operator’s position, lower safety seat
bar, start the engine and release the parking brake.
Leaving The Operator’s Position
Park the machine/attachment on a flat level
surface.
Place all controls in neutral, engage the park
brake, stop the engine and wait for all moving
parts to stop. Leave the operator’s position.
Connecting Attachment To The Machine
NOTE: Before attempting to attach the Brush
Cutter to the prime mover, verify that all hydraulic
couplings are compatible.
1. Place the Brush Cutter attachment on a level
surface.
2. Position and align the prime mover to the rear
of the attachment, within proximity of the front
of the prime mover.
3. Insert and connect the prime mover to the
attachment.
4. Connect the hydraulic lines from the
attachment to the prime mover.
5. Close latches (or other locking mechanism) to
secure the attachment to the prime mover.
2. Operation
WARNING
AVOID SERIOUS INJURY OR DEATH
• Always park on a flat level surface.
• Lower lift arms and place attachment flat on
the ground.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
SEE MACHINE’S OPERATOR’S MANUAL FOR
ADDITIONAL INFORMATION.
IMPORTANT
See the machine’s Operator’s Manual for detailed
information on operating the loader.
WARNING
CRUSH HAZARD
• Before moving the machine, look in all
directions and make sure no bystanders,
especially small children are in the work area.
Do not allow anyone between the machine
and attachment when approaching the
attachment for connecting.
• Keep fingers and hands out of pinch points
when connecting and disconnecting the
attachment.
CAUTION
All hydraulic connections must be clean and free
of debris before making any connection.
WARNING
Improper attachment to the prime mover may
cause personal injury.

7Blue Diamond® Attachments
6. Using the prime mover, raise the attachment
and move the attachment to ensure hydraulic
lines are clear of air and operate properly.
7. Lower the attachment to ground level.
8. Inspect that the attachment is mounted
properly and securely. If the attachment
does not meet this requirement, follow the
instructions to remove the Brush Cutter and re-
attach using the instructions above.
Disconnecting Attachment From the
Machine
1. Using the prime mover, lower the attachment
to the ground.
2. To prevent contamination, remove any dirt
and debris from the couplings. Disconnect the
hydraulic connection between the attachment
and the prime mover.
NOTE: Hydraulic connections must be
disconnected before disengaging latches to
prevent damage to the prime mover or the
attachment.
3. Disengage the prime mover latches (or other
locking mechanism) from the attachment.
4. Back the prime mover slowly away from the
attachment.
2. Operation
CAUTION
Hydraulics should operate in an even and smooth
manner. Hydraulic movement that is not even and
smooth may indicate that air is in the hydraulic
lines.
CAUTION
All hydraulic connections must be clean and free
of debris before making any connection.
WARNING
Improper attachment to the prime mover may
cause personal injury.

Blue Diamond® Attachments8
2.2 Brush Cutter Operation
Brush Cutter Operation
• Always operate this attachment with a prime
mover with an enclosed cab.
• Wear proper safety equipment as required
by working conditions and local, state, and
Federal laws.
• Never operate the Brush Cutter within 100
feet of people, animals, or damageable
property. Clear the area of objects that could
become projectiles, such as rocks, bottles, and
construction debris.
• Never operate the Brush Cutter with the back
more than 12” o the ground or where your
view is obstructed.
• Never operate the Brush Cutter with any
guards removed.
• Never operate the Brush Cutter without
the safety chain securely fastened to your
machine.
• Disengage the Brush Cutter and shut o the
engine before leaving the cab of your machine.
• Do not place hands or feet near the Brush
Cutter while the machine is running.
2. Operation
DANGER
ROTATING BLADES WILL CAUSE SERIOUS
INJURY OR DEATH
• Never put hands, feet or objects into or under
brush cutter when engine is running.
• Keep bystanders away.
• No riders.
• Stop engine before leaving the machine to
service.
DANGER
Keep all body parts away from the Brush Cutter
when in use.
Eye and Ear Protection:To
help ensure your safety as a
designated operator wear eye
and ear protection.
Safety Helmet:To help ensure
your safety as a designated
operator wear a safety helmet.
WARNING
THROWN OBJECTS OR ROTATING BLADES CAN
CAUSE SERIOUS INJURY OR DEATH
• Clear work area of all debris, such as rope,
wire, cable or other materials that can wrap
around blade carrier and blades, causing
entanglement and attachment damage.
• DO NOT operate brush cutter in vicinity of
bystanders, animals, or damageable property.
Objects can be thrown more than several
hundred feet.
• Keep all chains and shields installed. Repair
or replace if damaged or missing.
• Check blade carrier, blades and mounting
hardware. Replace if damaged. Never weld or
modify.

9Blue Diamond® Attachments
2.3 Inspection Schedule
Equipment Inspection Schedule
We recommend that you inspect the equipment for
damage and wear before use. Use the following
list as a guideline during equipment inspection
NOTE: Shut o the prime mover and disengage
the Brush Cutter before performing any
maintenance.
Daily Inspection and Maintenance
Inspect the Brush Cutter by performing a walk
around daily before and after use. Use the
following inspection checklist as a guideline.
2. Operation
WARNING
Leaking fluids under pressure can enter the skin
and cause serious injury or death. Immediate
medical attention is required.
Wear goggles. Use cardboard to check for leaks.
ITEMS
PAfter the Brush Cutter has been attached,
check that all latches or locks are closed.
PCheck that all hydraulic fittings are tight
and free of leaks.
PCheck that all hydraulic lines are free of
leaks, holes,or cracks. Replace if needed.
P
Check all hardware connections to the
prime mover for damage or fatigue such
as cracks or other structural flaws.
PInspect the safety chain for damage.
PInspect blades and bolts for wear,
damage, and loosening.
PCheck for wire or debris under the deck,
remove any present.
P
Check for any signs of grease under the
deck (potential damaged seal on the
direct drive)
PClean debris from the motor and drive
area.
PCheck that all guards and safety
equipment are in good condition.

Blue Diamond® Attachments10
2.3 Inspection Schedule
Cont’d
Weekly Inspection
Monthly Inspection
Inspection Checklist
2. Operation
ITEMS
PCheck blade bolts for correct torque
(1,440 ft/lb)
PCheck all bolts for tightness. 3/8” bolts:
50 lbs ft/lb & 1/2” bolts: 100 lbs ft/lb.
PInspect the deck for cracks, bends, or
damage.
PInspect discharge chains and replace any
missing or broken chains.
ITEMS
PAre all safety notices and warning
stickers in proper locations and visible?
PAre all safety guards properly installed
and in good condition?
PAre there any visible hydraulic leaks?
PHas the drive been greased?
PAre there vines or wires wound under the
deck?
PIs there any sign of grease under the
deck?
PAre any cracks visible in the brush
cutter’s structure?
PAre the blades worn, bent, or broken?
PHas all debris been removed from the
motor and drive area?
P
Has the prime mover been properly
inspected for hydraulic leaks and proper
tire inflation?
PHas the prime mover been properly
maintained?
ITEMS
PInspect the blades for cracks, bends, or
excessive wear.
PCheck skid plates for wear.
PInspect the bolts on the motor and drive.
Tighten if required.
PCheck that all bolts are tight.
PGrease drive system every 250 hours of
use (1 fitting on direct drive).

11Blue Diamond® Attachments
3. Parts
ITEM PART NUMBER DESCRIPTION QTY
1 203068 Direct Drive Spindle 1
2
203914 Lower Bearing Seal Protector (Bushing & Bolt) 5
3
4 203134 Upper Bearing Seal Protector 1
5 203056 Housing Bolt 3/4” 6
6 299657 Housing Nut 3/4” (included with bolt) 6
7 203086 Lower Bearing Seal 1
8 203074 Direct Drive Lower Bearing & Race 2
9 203076 Direct Drive Housing 1
10 203072 Grease Zerk 1
11 203075 Direct Drive Upper Bearing & Race 2
12 203105 Direct Drive Spindle Nut, Lower 1
13 203095 Direct Drive Lock Ring 1
14 203100 Direct Drive Star Lock Washer 1
15 203090 Direct Drive Spindle Nut, Upper 2
16 203156 Motor to Drive Flange 1
17
203763 Hydraulic Motor 100cc 1
203768 Hydraulic Motor 160cc 1
3.1 Direct Drive Spindle
17
14
16
15
13
12 11
10
9
8
7
4
3
2
1
6
5

Blue Diamond® Attachments12
3. Parts
3.1 Direct Drive Spindle Cont’d
Disassembly and Reassembly of Brush Cutter Direct Drive
1. Support the Brush Cutter by the blade carrier.
2. Remove Motor Cover
3. Remove hoses to motor
4. Remove motor and 4 bolts at flange.
5. Remove top nut 3-1/4”, star washer, lock washer, bottom nut 3-3/4”, and top bearing/race (items 11 – 15
on page 11).
6. Lift brush cutter straight up using the skid steer leaving behind the spindle, blade carrier, and blades
on the support.
7. Remove nuts and bolts holding the direct drive housing to the mower deck (items 5 and 6 on page 11)
8. Remove the direct drive housing (item 9 on page 11).
9. Remove lower seal and bottom bearing (items 7 and 8 on page 11).
NOTE: the bottom bearing is pressed in.
10. Reassembly is the reverse. See below for details on top nuts.
Top Nuts Details
Spindle
PN: 203068
Top Nut 3 1/4”
Torque to 100 lb/ft then bend up
tabs on star washer
Spindle Star Locking Washer
Align with groove in the Spindle
Bend up tab after top nut is
torqued
Spindle Lock Ring
Align with groove in the Spindle
Slide down to the bottom nut
Turn nut until the dowel aligns with
the nearest hole.
Bottom Nut 3-3/4”
Hand tighten against the top
Bearing and Torque to 100 lb/ft
Use red Loctite on the threads of both the lower and upper nut.

13Blue Diamond® Attachments
3. Parts
ITEM PART NUMBER DESCRIPTION QTY
1 203073 Drive Assembly (See page 11) 1
2
203500 Deck Weldment 60”
1
— Deck Weldment 72”
NS 203008 Blade Access Cover 1
NS 203006 Blade Access Cover Self-Tapping Bolts 2
3 203045 4 Link Chain —
4
203050 Chain Retainer Bar 60”
1
203055 Chain Retainer Bar 72”
5 203030 Lock Nut for Blade 3
6
203045 Blade Carrier 60” – 3 Blade
1
203042 Blade Carrier 72” – 3 Blade
7 203025 Pivot Bolt 3
8
203028 Blade for 60”
3
203027 Blade for 72”
3.2 Blade Assembly Breakdown
1
2
3 4
5
6
8
7

Blue Diamond® Attachments14
3. Parts
ITEM PART NUMBER DESCRIPTION QTY
1 BD-01 High Pressure Fluid Hazard Decal 1
2 BD-02 Read Owner’s Manual Before Operating Decal 1
3 BD-03 Do Not Operate Without Safety Chain in Place Decal 1
4 BD-04 Warning: Keep Hands and Feet Away Decal 4
5 BD-05 DANGER: Debris Discharge Area Stay Back 50 Feet 1
3.3 Warning Decal Placement
1 2 3 4
5
4
2
4
5
4
4
1

15Blue Diamond® Attachments
4. Specifications
4.1 Torque Specifications
BOLT
TYPE SAE GRADE 5 SAE GRADE 8 LOCK NUTS
Nominal
Size
Plated or
Unplated
Silver
Plated
W/ ZnCr
Gold
Plated or
Unplated
Silver
Plated
W/ ZnCr
Gold
Plated or
Unplated
Silver
Plated W/
ZnCr
Gold
W/ Grade
5 Bolt
W/ Grade
8 Bolt
1/4 55 in / lb
(6.2 N•m)
72 in / lb
(8.1 N•m)
86 in / lb
(9.7 N•m)
112 in / lb
(12.6 N•m)
121 in / lb
(13.6 N•m)
157 in / lb
(17.7 N•m)
61 in / lb
(6.9 N•m)
86 in / lb
(9.8 N•m)
5/16 115 in / lb
(13 N•m)
149 in / lb
(17 N•m)
178 in / lb
(20 N•m)
229 in / lb
(26 N•m)
250 in / lb
(28 N•m)
325 in / lb
(37 N•m)
125 in / lb
(14 N•m)
176 in / lb
(20 N•m)
3/8 17 ft / lb
(23 N•m)
22 ft / lb
(30 N•m)
26 ft / lb
(35 N•m)
34 ft / lb
(46 N•m)
37 ft / lb
(50 N•m)
48 ft / lb
(65 N•m)
19 ft / lb
(26 N•m)
26 ft / lb
(35 N•m)
7/16 27 ft / lb
(37 N•m)
35 ft / lb
(47 N•m)
42 ft / lb
(57 N•m)
54 ft / lb
(73 N•m)
59 ft / lb
(80 N•m)
77 ft / lb
(104 N•m
30 ft / lb
(41 N•m)
42 ft / lb
(57 N•m)
1/2 42 ft / lb
(57 N•m)
54 ft / lb
(73 N•m)
64 ft / lb
(87 N•m)
83 ft / lb
(113 N•m)
91 ft / lb
(123 N•m)
117 ft / lb
(159 N•m)
45 ft / lb
(61 N•m)
64 ft / lb
(88 N•m)
9/16 60 ft / lb
(81 N•m)
77 ft / lb
(104 N•m)
92 ft / lb
(125 N•m)
120 ft / lb
(163 N•m)
130 ft / lb
(176 N•m)
169 ft / lb
(229 N•m)
65 ft / lb
(88 N•m)
92 ft / lb
(125 N•m)
5/8 83 ft / lb
(112 N•m)
107 ft / lb
(145 N•m)
128 ft / lb
(174 N•m)
165 ft / lb
(224 N•m)
180 ft / lb
(244 N•m)
233 ft / lb
(316 N•m)
90 ft / lb
(122 N•m)
127 ft / lb
(172 N•m)
3/4 146 ft / lb
(198 N•m)
189 ft / lb
(256 N•m)
226 ft / lb
(306 N•m)
293 ft / lb
(397 N•m)
319 ft / lb
(432 N•m)
413 ft / lb
(560 N•m)
160 ft / lb
(217 N•m)
226 ft / lb
(306 N•m)
7/8 142 ft / lb
(193 N•m)
183 ft / lb
(248 N•m)
365 ft / lb
(495 N•m)
473 ft / lb
(641 N•m)
515 ft / lb
(698 N•m)
667 ft / lb
(904 N•m)
258 ft / lb
(350 N•m)
364 ft / lb
(494 N•m)
1213 ft / lb
(289 N•m)
275 ft / lb
(373 N•m)
547 ft / lb
(742 N•m)
708 ft / lb
(960 N•m)
773 ft / lb
(1048 N•m)
1000 ft / lb
(1356 N•m)
386 ft / lb
(523 N•m)
545 ft / lb
(739 N•m)
Standard Hardware and Lock Nuts

This page intentionally
left blank

MANUFACTURER’S LIMITED WARRANTY
BLUE DIAMOND®ATTACHMENTS, a manufacturer of quality attachments, warrants new BLUE DIAMOND®
ATTACHMENTS products and/or attachments at the time of delivery to the original purchaser, to be free
from defects in material and workmanship when properly set up and operated in accordance with the
recommendations set forth by BLUE DIAMOND®ATTACHMENTS, LLC.
BLUE DIAMOND®ATTACHMENTS liability for any defect with respect to accepted goods shall be limited to
repairing the goods at a BLUE DIAMOND®ATTACHMENTS designated location or at an authorized dealer
location, or replacing them, as BLUE DIAMOND®ATTACHMENTS shall elect. The above shall be in accordance
with BLUE DIAMOND®ATTACHMENTS warranty adjustment policies. BLUE DIAMOND®ATTACHMENTS obligation
shall terminate twelve (12) months for the Heavy Duty Series 2 Brush Cutter after the delivery of the goods to
original purchaser.
This warranty shall not apply to any machine or attachment which shall have been repaired or altered
outside the BLUE DIAMOND®ATTACHMENTS factory or authorized BLUE DIAMOND®ATTACHMENTS dealership
or in any way so as in BLUE DIAMOND®ATTACHMENTS judgment, to aect its stability or reliability, nor which has
been subject to misuse, negligence or accident beyond the company recommended machine rated capacity.
WARRANTY CLAIM
To submit a warranty claim, a claim must be filed with BLUE DIAMOND®ATTACHMENTS before work is performed.
The BLUE DIAMOND® PRODUCT SUPPORT TEAM will advise repairs and applicable parts exchanges. Tampering
with the failed part may void the warranty. This warranty does not include freight or delivery charges incurred
when returning machinery for servicing. Dealer mileage, service calls, and pickup/delivery charges are the
customers’ responsibility.
EXCLUSIONS OF WARRANTY
Except as otherwise expressly stated herein, BLUE DIAMOND®ATTACHMENTS makes no representation or
warranty of any kind, expressed or implied, AND MAKES NO WARRANTY OF MERCHANTABILITY IN RESPECT
TO ITS MACHINERY AND/OR ATTACHMENTS ARE FIT FOR ANY PARTICULAR PURPOSE. BLUE DIAMOND®
ATTACHMENTS shall not be liable for incidental or consequential damages for any breach or warranty, including
but not limited to inconvenience, rental of replacement equipment, loss of profits or other commercial loss.
Upon purchase, the buyer assumes all liability for all personal injury and property resulting from the handling,
possession, or use of the goods by the buyer.
No agent, employee, or representative of BLUE DIAMOND®ATTACHMENTS has any authority to bind BLUE
DIAMOND®ATTACHMENTS to any armation, representation, or warranty concerning its machinery and/or
attachments except as specifically set forth herein.
This warranty policy supersedes any previous documents.
NOTE: Blue Diamond®Attachments is a trademark of BLUE DIAMOND®ATTACHMENTS
Warranty

QUALITY | DEPENDABILITY | INTEGRITY
Blue Diamond® Attachments
4512 Anderson Road, Knoxville, TN 37918
888-376-7027