Blue Giant Blue Genius Touch Control User manual

OWNER’S MANUAL
BLUE GENIUS™TOUCH CONTROL
MASTER CONTROL PANELS
ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)STARTING FROM MARCH, 2016 / SERIAL # 411892
WARNING
ACTUAL PRODUCT MAY NOT APPEAR EXACTLY AS SHOWN
Do not operate or service this product unless you have
read and fully understand the entire contents of this
manual. Failure to do so may result in property damage,
bodily injury or death.

BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
2ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
TABLE OF CONTENTS
1.0 ABOUT BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS 3
1.1 OWNER’S PURCHASE RECORD 3
2.0 INTRODUCTION 4
2.1 WARRANTY INFORMATION 4
2.2 EXCLUSION OF LIABILITY 4
2.3 MANUFACTURER’S NOTE 4
2.4 OWNER’S RESPONSIBILITY 5
3.0 SAFETY MESSAGE COLOR IDENTIFICATION 6
3.1 OPERATIONAL SAFETY WARNINGS 6
4.0 LOCKOUT / TAGOUT PROCEDURE AND RULES 7
4.1 ROTARY DISCONNECT: PLATINUM SERIES 7
5.0 CONTROL PANEL OPERATION: GOLD SERIES III 8
5.1 BUTTON FUNCTION: GOLD SERIES III 8
5.2 CONTROL SECTIONS: GOLD SERIES III 9
6.0 RECOMMENDED SPARE PARTS: GOLD SERIES III 10
7.0 EQUIPMENT COMPONENT ILLUSTRATIONS: GOLD SERIES III 11
7.1 COMPONENTS AS SHIPPED CHECK LIST: GOLD SERIES III 11
7.2 MECHANICAL ASSEMBLY: GOLD SERIES III 12
7.3 GENERAL DIMENSIONS: GOLD SERIES III 13
8.0 CONTROL PANEL OPERATION: PLATINUM SERIES 14
8.1 BUTTON FUNCTION: PLATINUM SERIES 14
8.2 CONTROL SECTIONS: PLATINUM SERIES 15
9.0 RECOMMENDED SPARE PARTS: PLATINUM SERIES 17
10.0 EQUIPMENT COMPONENT ILLUSTRATIONS: PLATINUM SERIES 18
10.1 COMPONENTS AS SHIPPED: PLATINUM SERIES 18
10.2 MECHANICAL ASSEMBLY: PLATINUM SERIES 19
10.3 GENERAL DIMENSIONS: PLATINUM SERIES 21
11.0 DECAL IDENTIFICATION AND LOCATION: GOLD SERIES III AND PLATINUM SERIES 22
12.0 STOP PROCEDURE: GOLD SERIES III AND PLATINUM SERIES 23
13.0 OPERATING INSTRUCTIONS: GOLD SERIES III AND PLATINUM SERIES 24
13.1 ALTERNATIVE METHODS OF OPERATION: GOLD SERIES III AND PLATINUM SERIES 25
14.0 ENGAGING THE OVERRIDE FEATURE: GOLD SERIES III AND PLATINUM SERIES 26
14.1 RELEASING THE OVERRIDE FEATURE: GOLD SERIES III AND PLATINUM SERIES 27
15.0 EXTERIOR TRAFFIC LIGHT / MIRROR IMAGE SIGN: GOLD SERIES III AND PLATINUM SERIES 28
16.0 CONTROL PANEL LCD MESSAGES: GOLD SERIES III AND PLATINUM SERIES 29
17.0 WIRING DIAGRAMS: GOLD SERIES III AND PLATINUM SERIES 29
17.1 WIRING DIAGRAM - 115V SINGLE PHASE: GOLD SERIES III (SVR303 & FH COMBO) 30
17.2 WIRING DIAGRAM - 230V SINGLE PHASE: GOLD SERIES III (TL85 REMOTE & FH COMBO) 31
17.3 POWER WIRING DIAGRAM - 230 - 575V THREE PHASE: PLATINUM SERIES (SVR303 & VL COMBO) 32
17.4 CONTROL WIRING DIAGRAM - 230 - 575V THREE PHASE: PLATINUM SERIES (SVR303 & VL COMBO) 34

BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
3ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
1.0 ABOUT BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS
1.1 OWNER’S PURCHASE RECORD
OWNER’S PURCHASE RECORD
Please record information for future inquiries and to validate warranty. (See Section 2.1 for warranty validation)
Dealer: Date in Service:
Number of Units:
Serial Number: Door #:
Serial Number: Door #:
Serial Number: Door #:
Serial Number: Door #:
• Dock leveler
• Vehicle restraint
• Overhead door (standard with Platinum Series, optional with Gold Series)
• Inflatable seal (standard with Platinum Series, optional with Gold Series)
• Dock lights (standard with Platinum Series, optional with Gold Series)
• Communications - Traffic lights (trailer and forklift) and LCD menu screen
The equipment operation sequence is structured to ensure safety and efficiency. The LCD menu screen provides ongoing equipment
status as well as instructions for operating and troubleshooting. The interior and exterior LED light communication system displays
safety signals to truck drivers and dock personnel. The rotary disconnect (Platinum Series only) cuts power to the unit for routine
servicing and maintenance.
The panel’s NEMA4X-rated polycarbonate enclosure is wet and corrosion-resistant, ensuring seamless operation in the wash-down zone
and outdoor locations. The control panels are also compatible with operations that must adhere to the FDA’s high cleaning standards,
such as pharmaceutical and chemical handling locations.
The manufacturer offers a full line of dock levelers, dock safety equipment, accessories, ergonomic and scissor lift equipment, seals and
shelters, and industrial trucks. Concurrent with a continuing product improvement program, specifications are subject to change without
notice (see Section 2.2 "Exclusion of Liability" of this manual). Please contact the manufacturer for latest information. Some features
illustrated may be optional in certain market areas.
Gold Series III Platinum Series
See Section 11.0 "Decal Identification and Location: Gold Series III and Platinum Series," item #3 for serial number location.
NOTICE
Blue Genius™ Touch Control Master Control Panels (MCP) represent the highest
level in loading dock safety and productivity.
The Master Control Panels consolidate the controls for multiple interconnected
dock devices:
Section applies only to
Blue Genius™ Gold Series III
Section applies only to
Blue Genius™ Platinum Series
Section applies to both
Blue Genius™ control panels
LEGEND

BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
4ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
DEALER INFORMATION
Name:
Contact:
Telephone:
2.0 INTRODUCTION
The following is a quick reference to important procedures that
must be followed while using the MCP. It is not intended to cover,
or suggest that it does cover, all procedures necessary to ensure
safe operation. All operators should be aware of and abide by all
workplace safety regulations applicable to the operation of the
MCP. These laws and regulations include but are not limited to:
• The Occupational Safety and Health Act
• Canada Occupational Health and Safety Regulations
• Occupational Safety and Health Acts for Individual States
(USA)
For additional information on these regulations as well as industry
standards that may apply to this product, please contact:
American National Standards Institute (ANSI)
1430 Broadway
New York, NY 10018
Telephone: [phone]
www.ansi.org
Also a member of:
Loading Dock Equipment Manufacturers
A Product Section of Material Handling Industry of America
A Division of Material Handling Industry
8720 Red Oak Blvd, Suite 201
Charlotte, NC, 28217-3992
Telephone: [phone]
www.mhi.org/lodem
2.1 WARRANTY INFORMATION
Thank you for purchasing Blue Giant products. We appreciate
your business, and are confident that our product will serve
you for many years to come. In the event that you experience a
problem with our product, our Warranty Center is here to support
the Blue Giant product(s) that you have purchased.
To validate warranty on recently purchased equipment,
please complete and submit your information with our
online Warranty Registration at www.BlueGiant.com.
For more information about Blue Giant Warranty Support, please
contact your local Blue Giant Equipment dealer, representative or
authorized partner near you. You may also visit www.BlueGiant.
com or phone [phone].
* NOTE that failure to validate warranty at the time of receipt can
seriously affect the outcome of any claim.
2.2 EXCLUSION OF LIABILITY
The manufacturer assumes no liability for damage or injury to
persons or property which occur as a result of defects or faults
in or incorrect use of the control panel. The manufacturer also
assumes no liability for lost profits, operating downtimes, or similar
indirect losses incurred by the purchaser. Injury to third parties,
irrespective of its nature, is not subject to compensation.
The manufacturer reserves the right to make changes at any time
to the modules, components, and accessories, concurrent with
its continuing product improvements and development program.
Specifications, operating instructions, and illustrations included in
this manual are subject to change without notice. Please contact
manufacturer for the latest information.
2.3 MANUFACTURER’S NOTE
The control panel has been carefully inspected and tested at the
manufacturer’s plant prior to shipment, but should be checked
upon receipt for transport damage. Any observed transport
damage is to be listed on the signed copy of the freight document.
Notify the freight forwarder of any damage WITHIN 48 HOURS.

BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
5ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
2.4 OWNER’S RESPONSIBILITY
1. The owner should recognize the inherent danger of the
interface between the dock and the freight carrier. The owner
should, therefore, train and instruct operators in the safe use
of the dock equipment and accessories in accordance with the
manufacturer’s recommendations.
2. The owner should thoroughly familiarize themselves with
the following procedures and specifications, and request
immediate replacement of all manufacturer-supplied
documents that are missing, damaged, or otherwise illegible.
Below is a list of Best Practices for dock equipment usage and
maintenance.
• Commissioning instructions
• Operating instructions
• Daily maintenance procedures checklist
• Inspections procedures
• Recommended spare parts lists
Upon receipt of any newly purchased dock equipment,
the owner shall verify the presence of owner’s manuals,
operating placards, and any other documentation necessary
for training dock personnel how to use the equipment safely
and effectively.
3. All Blue Giant dock equipment should undergo regularly
scheduled planned maintenance. Maintenance requirements
will vary according to usage frequency and application,
so the owner shall consult with their authorized Blue Giant
distributor for schedule recommendation. Written records of
the performance of these procedures should be kept as per
warranty requirements.
4. Dock equipment that is structurally damaged, experiencing
performance irregularities, or has been potentially
compromised shall be removed from service until a trained
and authorized manufacturer’s representative can conduct an
inspection and perform any necessary repairs.
5. As with any piece of machinery, dock equipment requires
routine maintenance, lubrication, and adjustments.
Recommended procedures are itemized in the Planned
Maintenance Program (PMP) checklist included in installation
and technical manuals. It is recommended that for anything
other than the basic maintenance procedures outlined in this
manual, you contact your local Blue Giant representative.
6. The owner shall ensure that all name plates and safety labels
are in place and legible, and that the appropriate manuals
are provided to authorized users. Replacement name plates,
safety labels, and manuals are available through the Blue
Giant Aftermarket Department. See “Decal Identification and
Location” section in this manual for more information.
7. The owner or a trained and authorized representative shall
verify that all freight carrier brakes have been applied and a
vehicle restraint and/or wheel chocks properly engaged before
cross-docking procedures begin. For safety reasons trailers
must be held securely in place to avoid accidental separation
from the loading dock.
8. Unless specifically agreed to in writing by Blue Giant Equipment
Corporation at the time of order (and prior to manufacture), all
Blue Giant Dock equipment is sold as a complete offering and
must not be altered or added to in any manner (which includes
configuration and function) without written permission from
an authorized manufacturer’s representative. These changes
shall also satisfy all safety recommendations of the original
equipment manufacturer for the particular application of the
dock equipment.
9. If, at the request of the owner, Blue Giant does not supply
all or some of the dock equipment power unit and/or control
panel components, the owner shall assume responsibility for
any and all operational and safety issues associated with the
resulting configuration.

BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
6ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
Serious injury or death will likely occur if the
instructions are not followed.
Serious injury or death may occur if the
instructions are not followed.
Procedures marked notice must be followed in order
to prevent damage to machinery.
Instructions marked caution concern safe operating procedure.
Failure to comply may result in personal injury.
3.1 OPERATIONAL SAFETY WARNINGS
DANGER
WARNING
NOTICE
CAUTION
1. Installation must be performed only by trained and authorized personnel.
2. Prior to installation, place adequate barriers to prevent vehicle traffic from entering the work area.
3. Any electrical work must be performed by qualified personnel only.
4. Do not remove the wheel chocks until loading / unloading is finished and the truck is cleared for departure or the vehicle restraint has been
released and the lights have changed to RED inside and GREEN outside.
WARNING
1. Do not operate the dock equipment while anyone is standing in its path.
2. Lift the dock equipment with suitable hoisting equipment only. Do not stand under the dock equipment or any heavy object while it is being
hoisted.
3. BEFORE BEGINNING ANY SERVICE PROCEDURES:
Disconnect the power and follow all lockout / tagout procedures outlined in this manual.
DANGER
1. Do not ground welding equipment to any electrical components.
2. Do not allow the drill to go too deeply into the control box, as damage may occur to the control systems.
3. Never use air to blow debris from the control box. Use a vacuum to perform any necessary cleaning.
4. Do not connect green ground lead into control box or junction box until all welding has been completed.
NOTICE
1. Only trained personnel should operate or service this equipment.
2. Do not operate the dock equipment until the transport vehicle is parked against the dock bumpers.
3. Always park the dock equipment after use (ensure that the lip is safely parked in the lip keepers).
4. Conduct routine inspections and maintenance. Failure to do so could cause equipment damage and or personal injury.
5. Always call your authorized service representative or manufacturer immediately if a malfunction occurs.
6. Always return the restraint arm to the parked position after use.
CAUTION
3.0 SAFETY MESSAGE COLOR IDENTIFICATION
This manual includes color-coded safety messages that clarify instructions and specify areas where potential hazard exists. To prevent
the possibility of equipment damage and serious injury or death, please observe strictly the instructions and warnings contained in
the messages. If warning decals become damaged or missing, replace them immediately. Avoid accidents by recognizing dangerous
procedures or situations before they occur.

ThisLock/Tagmay
onlyberemovedby:
OPERATE
DO NOT
ThisLock/Tagmay
onlyberemovedby:
OPERATE
DO NOT
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
7ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
WARNING
Always lockout and tagout any power source before performing any work on any electrical devices or electrical controls according to OSHA
regulations and approved local electrical codes.
Approved way to lockout / tagout.
4.0 LOCKOUT / TAGOUT PROCEDURE AND RULES
In accordance with the rules and regulations of the Occupational
Safety and Health Administration (OSHA), all affected employees
must be notified that the machine or equipment will be shut down
and locked out to perform repair or maintenance work. The work
area must be checked to ensure that all personnel have been
removed or safely repositioned. The machine or equipment power
supply shall be locked in the OFF position or disconnected from
the energy source. Blue Giant strongly recommends that only
OSHA-approved lockout devices and procedures be utilized.
The energy isolating device must bear a prominent warning tag
indicating that work is being done on the equipment and the
name of the authorized employee responsible for the lockout. It is
mandatory that tagout notices not be susceptible to deterioration
or illegibility due to weather conditions or exposure to chemicals
and moisture.
The Platinum Series has a built-in rotary disconnect. The disconnect
has two switch positions: ON and OFF, and can be locked in either
position.
Approved way to lockout / tagout.
OFF
4.1 ROTARY DISCONNECT: PLATINUM SERIES

READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
www.BlueGiant.com
Gold Series
TM
enius
G
lue
B
Touch Control
R
R
E
S
T
R
A
I
N
T
ESC
SEL
ESC
SEL
Engage
Release
Do Not Enter
Caution
Enter on Green
7
123
456
789
0#
*
*
REST RAINT
Engage
Release
Lèvre
Lip
Deck
Rampe
NIVELEUR
DOCK
LEVELER
STOP
Down
Lip
Deck
DOCK
LEVELER
D
O
O
R
R
E
S
T
R
A
I
N
T
REST RAINT
Engage
Engager
Release
4
5
6
7
8
3
2
1
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
8ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
Controls combinations of all supported dock equipment: one individual vehicle restraint, one individual dock leveler, and controls for
a door. Also equipped with touch buttons, inside forklift operator traffic lights, operator menu screen, and keypad for coded features.
5.0 CONTROL PANEL OPERATION: GOLD SERIES III
Select
Escape
Dock Leveler
(Raise/Lower Deck/Lip)
Restraint “ENGAGE”
(Raise / Lock Restraint)
Restraint “RELEASE”
(Lower / Unlock
Restraint) / Override
Release
“STOP”
Scroll "UP" / “DOWN”
and/or Door Control
Audible Speaker
Control Station Keypad
(Override, Security,
Features)
Green Light
(Enter on Green)
Yellow Light
(Proceed with Caution)
Red Light
(Do Not Enter)
NOTE: Typical decal shown, actual decal is bilingual.
Menu Screen
(LCD Display)
5.1 BUTTON FUNCTION: GOLD SERIES III
When touching any of the function buttons or keypad, use the pad
of the finger. The control panel’s unique touch sensors detect the
proximity of the dock operator’s finger. Audible touch buttons and
keypad on the control panel provide instant sound feedback to
user input.
Audible touch

STOP
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
ARRÊT
Open
Abrir
Close
Fermer
PORTE
DOOR
STOP
ARRÊT
Down
Descente
Lèvre
Lip
Deck
Rampe
NIVELEUR
DOCK
LEVELER
Marche
Arrêt
Light
Lampe
On
Off
LAMPE
DE
QUAI
DOCK
LIGHT
On
Off
Marche
Arrêt
Seal
Sas
INFLATABLE
SEAL
SAS
FONGLABLE
7
123
456
789
0#
*
*
Enter On Green
Entrer Sur Vert
Caution
Attention
Do Not Enter
Ne Pas Entrer
ESC
SELA B C
R
C o ntrol
REST RAINT
CROCHET
Engage
Engager
Release
Dégager
Lip
Deck
DOCK
LEVELER
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
D
O
O
R
Down
Lip
Deck
DOCK
LEVELER
D
O
O
R
Open
Close
†
**
8
2
3
5
6
4
7
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
9ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
AUDIBLE SPEAKER:
Brings safety issues to dock attendant's attention.
Emits sound when "Audible touch" buttons are pressed.
5.2 CONTROL SECTIONS: GOLD SERIES III
This section explains the function of each button on the Gold Series III. General operating instructions for all connected dock equipment
appear in the following section.
MENU SCREEN (LCD DISPLAY):
Displays digital instructions for the operating and troubleshooting of all connected dock equipment.
FORKLIFT TRAFFIC LIGHTS:
RED: The connection between the dock and trailer is not yet secure.
YELLOW: Caution. Restraint is bypassed or ready to end load when flashing.
GREEN: The connection between the dock and trailer is secure. Also confirms that the leveler is
released from home and may be engaged to trailer.
CONTROL PANEL KEYPAD:
Enables code-based security features such as vehicle restraint bypass.
DOOR CONTROL:
OPEN: Opens the overhead door when the door is not programmed to open automatically when
the restraint is engaged.
CLOSE: Lowers the overhead door. Must be held.
RESTRAINT:
ENGAGE: Begins the engagement sequence of the restraint arm / hook.
RELEASE: Disengages the restraint arm / hook.
DOCK LEVELER:
DECK: Raises the deck from the deployed or parked position.
LIP: Deploys the deck lip (also parks the deck lip of vertical storing dock levelers).
DOWN: Lowers the deck (vertical storing dock levelers only) or lowers the Door and Dock Guard
via bypass mode (XDS only).
† VL Vertical Storing Dock Leveler and XDS only.
STOP:
Halts or limits the motion of all interlocked equipment and door.
1
* If Equipped

* Optional † If Equipped
3
1 2
7
4
5†6*
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
10 ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
6.0 RECOMMENDED SPARE PARTS: GOLD SERIES III
STANDARD OPERATIONAL COMPONENTS
ITEM PART NO.DESCRIPTION QTY. REQ'D
1
SINGLE PHASE
026-PB1115 Power Board Sub-assembly
(1PH 115V 50-60HZ) 1
026-PB1230 Power Board Sub-assembly
(1PH 230V 50-60HZ)
THREE PHASE
026-PB3230 Power Board Sub-assembly
(3PH 230V 50-60HZ)
1
026-PB3400 Power Board Sub-assembly
(3PH 400V 50-60HZ)
026-PB3460 Power Board Sub-assembly
(3PH 460V 50-60HZ)
026-PB3575 Power Board Sub-assembly
(3PH 575V 50-60HZ)
2
026-G021-99 Control/Touch Board w/LED and
LCD Modules 1
025-G014-V3-M Transparent Cover Door 1
— Decal, Part # based on Serial # 1
3 026-G025M Remote I/O-A Board w/ Resistor 1
4 026-G025BMRemote I/O-B Board w/o Resistor
(for SVR303) 1
5026-G025-99M Remote I/O-B Board w/ Door Control 1
6 026-G030 Ribbon Cable, 16 Wire/Pin
w/ Connector 1
STANDARD OPERATIONAL COMPONENTS
ITEM PART NO.DESCRIPTION QTY. REQ'D
7
026-G100 Fuse, 15A, 250V,
Slow Blow for 1PH, 110-130V 1 (pkg. of 5)
026-G101 Fuse, 8A, 250V,
Slow Blow for 1PH, 208-240V 1 (pkg. of 5)
026-G102 Fuse, 0.5A, 250V
Slow Blow for 1 and 3PH, 208-240V 1 (pkg. of 5)
026-G103 Fuse, 0.25A, 250V
Slow Blow for 1PH, 208-240V 1 (pkg. of 5)
026-G104 Fuse, 0.75A, 250V
Slow Blow for 1PH, 110-130V 1 (pkg. of 5)
026-G105 Fuse, 500mA, 700V,
Fast Blow for 3PH, 380-415V 1 (pkg. of 5)
026-G106 Fuse, 400mA, 700V,
Fast Blow for 3PH, 440-480V 1 (pkg. of 5)
026-G107 Fuse, 315mA, 700V,
Fast Blow for 3PH, 575-600V 1 (pkg. of 5)
026-G123 Fuse, 5A, 250V,
Slow Blow for 1PH, 110-130V 1 (pkg. of 5)

OWNER’S MANUAL
BLUE GENIUS™TOUCH CONTROL
MASTER CONTROL PANELS
ISSUE DATE:JULY 15, 2014 REV.0 (PART# 038-918E)STARTINGFROM SERIAL # 379183-01
Do not operate or service this product unless you have
read and fully understand the entire contents of this
manual. Failure to do so may result in property damage,
bodily injury or death.
WARNING
ACTUAL PRODUCT MAYNOT APPEAR EXACTLY AS SHOWN
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
11ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
7.0 EQUIPMENT COMPONENT ILLUSTRATIONS: GOLD SERIES III
7.1 COMPONENTS AS SHIPPED CHECK LIST: GOLD SERIES III
ITEM QTY PART NO. DESCRIPTION APPROX. WEIGHT
1 1
BGG-X-XXXXX-X
Dependent on voltage
See Section 7.2
Blue Genius™ Gold Series III Control Panel 10 lb 4.5 kg
2 1 025-G010-1 Mounting Tabs with hardware (1 pkg. of 4) — —
3 1 038-225
E
Exterior Driver Warning Sign 0.7 lb 0.32 kg
F
S
P
4 1 032-461 Exterior Driver Traffic Light 1.3 lb 0.6 kg
5 1 038-918
E
Owner's Manual (this one) — —F
S
6 1 Dependent on model #
E
Operation Placard(s) — —F
S
CONTROL AND
COMPONENTS
1
2
5
3
4
6

12
3
8
10
9
6
F2
Fuse Holder 1
Fuse Holder 2
7
2
5
4
Fuse Holder 3
F1
F3
1
Wiring Diagram Enclosed
11
4A 4C4B
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
12 ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
7.2 MECHANICAL ASSEMBLY: GOLD SERIES III
◊ Location on Power Board † Includes Fuses ‡ 115 Volt Control Box Shown
* Language on decal: F = English / French S = English / Spanish
COMPLETE CONTROL STATION ASSEMBLY - ITEM 1 (Example BGGFS1115F)
ITEM SINGLE PHASE
2
◊FUSE QTY PART NO. DESCRIPTION ASSY PART # *
F1 A J 1
026-PB1115
Power Board
Sub-Assembly †
(1PH 115V 50-60HZ)
BGGFS1115
F
F2 E 1 S
F1
C
1
026-PB1230
Power Board
Sub-Assembly †
(1PH 230V 50-60HZ)
BGGFS1230
F
F2 1 S
THREE PHASE
◊FUSE QTY PART NO. DESCRIPTION ASSY PART # *
F1
C
1
026-PB3230
Power Board
Sub-Assembly †
(3PH 230V 50-60HZ)
BGGFS3230
F
F2 1 S
F1
F
1
026-PB3400
Power Board
Sub-Assembly †
(3PH 400V 50-60HZ)
BGGFS3400
F
F2 1 S
F1
G
1
026-PB3460
Power Board
Sub-Assembly †
(3PH 460V 50-60HZ)
BGGFS3460
F
F2 1 S
F1
H
1
026-PB3575
Power Board
Sub-Assembly †
(3PH 575V 60HZ)
BGGFS3575
F
F2 1 S
3 1 025-G010-M Control Box Enclosure (Includes 4C)
4 1 025-G014-V3-M Transparent Cover Door (4C) and Touch
Control Board (4A) (Serial # Required)
4A 1 026-G021-M Touch Control Board (Serial # Required)
4B 5 025-062 Cable Tie Mount
4C 1 025-G014 Transparent Cover Door
5 1 038-XXXE
F
Face Decal (Dependent on Configuration)
S
ITEM QTY PART NO. DESCRIPTION
6 1 025-G010-1 Mounting Tabs with Hardware (1 pkg. of 4)
7 1 026-G030 Ribbon Cable
8 1 038-284E
F
Decal, Serial Plate
S
9 1 038-283ESF Decal, Do Not Drill
10 1 038-853E
F
Warning Decal
S
11 1 026-615-1 Anti-Static Poly Bag (Wiring Diagram Enclosed)
(Serial # required for diagram)
12 1 026-G028 Audible Speaker
F3 1 026-037-1 Fuse, 2.5A, 700V, Fast-Blow 1/4" Glass
AS PER VOLTAGE - SEE ITEM 1
ITEM QTY PART NO. DESCRIPTION USE
A 1 026-G100 Fuse, 15A, 250V
for 1PH,110-130V
LEVELER,
SVR303
B 1 026-G101 Fuse, 8A, 250V
for 1PH, 208-240V TL85
C 1 026-G102 Fuse, 0.5A, 250V
for 1 and 3PH, 208-240V
D 1 026-G103 Fuse, 0.25A, 250V
for 1PH, 208-240V
E 1 026-G104 Fuse, 0.75A, 250V,
for 1PH, 110-130V
F 1 026-G105 Fuse, 500mA, 700V
for 3PH, 380-415V
G 1 026-G106 Fuse, 400mA, 700V
for 3PH, 440-480V
H 1 026-G107 Fuse, 315mA, 700V
for 3PH, 575-600V
J 1 026-G123 Fuse, 5A, 250V
for 1PH 110-130V HVR303

8 1/32"
(204mm)
11 29/32"
(302mm)
12 17/32"
(318mm)
Ø 1/4"
Slot typ.
6 5/32"
(156mm)
Ø 3/16"
typ.
7 15/32"
(190mm)
5 13/32"
(137mm)
11 9/32"
(287mm)
10 19/32"
(269mm)
13"
(330mm)
5 27/32"
(148mm)
R= 7 15/32"
(190mm)
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
13ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
7.3 GENERAL DIMENSIONS: GOLD SERIES III

Platinum Series www.BlueGiant.com #038-898EF
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
ON
R
E
S
T
R
A
I
N
T
REST RAINT
Engage
Engager
Release
6
1
4
7
8
9
10
3
2
12
5
11
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
14 ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
Scroll “UP”
Escape
Inflatable Seal
Dock Leveler
(Raise/Lower Deck/Lip)
Dock Light
Door
(Open/Close/Stop)
Select
Restraint “ENGAGE”
(Raise / Lock Restraint)
Restraint “RELEASE”
(Lower / Unlock
Restraint) / Override
Release
Menu Screen
(LCD Display)
Menu Choice
Buttons
Change Language
Button
Setup
(Root Menu System)
Control Station Keypad
(Override, Security,
Features)
Green Light
(Enter on Green)
“STOP”
8.0 CONTROL PANEL OPERATION: PLATINUM SERIES
Controls combinations of all supported dock equipment: one individual vehicle restraint, dock leveler, door, inflatable seal, and dock
light. Also equipped with touch buttons, inside forklift operator traffic lights, operator menu screen, and keypad for coded features.
Scroll “DOWN”
When touching any of the function buttons or keypad, use the pad
of the finger. The control panel’s unique touch sensors detect the
proximity of the dock operator’s finger. Audible touch buttons and
keypad on the control panel provide instant sound feedback to
user input.
Yellow Light
(Proceed with Caution)
Red Light
(Do Not Enter)
Rotary Disconnect
Audible Speaker
Platinum Series www.BlueGiant.com
8.1 BUTTON FUNCTION: PLATINUM SERIES
NOTE: Typical decal shown, actual decal is bilingual.
Audible touch

Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
ARRÊT
Open
Abrir
Close
Fermer
PORTE
DOOR
STOP
ARRÊT
Down
Descente
Lèvre
Lip
Deck
Rampe
NIVELEUR
DOCK
LEVELER
Marche
Arrêt
Light
Lampe
On
Off
LAMPE
DE
QUAI
DOCK
LIGHT
On
Off
Marche
Arrêt
Seal
Sas
INFLATABLE
SEAL
SAS
FONGLABLE
7
123
456
789
0#
*
*
Enter On Green
Entrer Sur Vert
Caution
Attention
Do Not Enter
Ne Pas Entrer
ESC
SELA B C
R
C o ntrol
REST RAINT
CROCHET
Engage
Engager
Release
Dégager
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
ARRÊT
Open
Abrir
Close
Fermer
PORTE
DOOR
STOP
ARRÊT
Down
Descente
Lèvre
Lip
Deck
Rampe
NIVELEUR
DOCK
LEVELER
Marche
Arrêt
Light
Lampe
On
Off
LAMPE
DE
QUAI
DOCK
LIGHT
On
Off
Marche
Arrêt
Seal
Sas
INFLATABLE
SEAL
SAS
FONGLABLE
7
123
456
789
0#
*
*
Enter On Green
Entrer Sur Vert
Caution
Attention
Do Not Enter
Ne Pas Entrer
ESC
SELA B C
R
C o ntrol
REST RAINT
CROCHET
Engage
Engager
Release
Dégager
ON
1
3
2
4
5
6
7
8
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
15ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
8.2 CONTROL SECTIONS: PLATINUM SERIES
This section explains the function of each button on the Platinum Series. General operating instructions for all connected dock equipment
appear in the following section.
MENU SCREEN (LCD DISPLAY):
Displays digital instructions for the operating and troubleshooting of all connected dock
equipment.
LED CONTROL PANEL LIGHTS:
RED: Do Not Enter: the connection between the dock and trailer is not yet secure.
YELLOW: Caution. Restraint is bypassed or ready to end load when flashing.
GREEN: Enter: the connection between the dock and trailer is secure.
LANGUAGE:
Changes the LCD display language to English, French, or Spanish.
CONTROL STATION KEYPAD:
Enables code-based security features such as vehicle restraint bypass.
ROTARY DISCONNECT:
ON: Locks the control panel enclosure and provides power to the unit.
OFF: Unlocks the control panel enclosure and cuts power to the unit.
RESTRAINT:
ENGAGE: Begins the engagement sequence of the restraint arm / hook.
RELEASE: Disengages the restraint arm / hook.
INFLATABLE SEAL:
Activates and deactivates the inflatable seal when the seal is not in automatic mode.
DOCK LEVELER:
DECK: Raises the deck from the deployed or parked position.
LIP: Deploys the deck lip (also parks the deck lip of vertical storing dock levelers).
DOWN: Lowers the deck (vertical storing dock levelers only) or lowers the Door and Dock
Guard via bypass mode (XDS only).

Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
STOP
10
12
11
9
Platinum Series www.BlueGiant.com #038-898EF
COUPER LE COURANT
AVANT D'OUVRIR.
LIRE ET BIEN COMPRENDRE LE
GUIDE D'UTILISATION AVANT
D'UTILISER CE PRODUIT.
READ AND FULLY
UNDERSTAND THE OWNER’S
MANUAL BEFORE OPERATING
THIS PRODUCT.
DISCONNECT POWER
BEFORE OPENING.
WARNING
AVERTISSEMENT
STOP
Open
Close
DOOR
STOP
Down
Lip
Deck
DOCK
LEVELER
Light
On
Off
DOCK
LIGHT
On
Off
Seal
Sas
INFLATABLE
SEAL
7
123
456
789
0#
*
*
Enter On Green
Caution
Do Not Enter
ESC
SELA B C
R
C o ntrol
REST RAINT
Engage
Release
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
16 ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
8.2 CONTROL SECTIONS: PLATINUM SERIES CONT'D.
DOOR:
OPEN: Opens the overhead door when the door is not programmed to open automatically when
the restraint is engaged.
CLOSE: Lowers the overhead door. Must be held.
STOP: Stops the door in mid-motion.
STOP:
Halts or limits the motion of all interlocked equipment and door.
AUDIBLE SPEAKER:
Brings safety issues to dock attendant's attention.
Emits sound when "Audible touch" buttons are pressed.
DOCK LIGHT:
Activates and deactivates the dock light when the light is not in automatic mode.

9
5*
3
4
7810*
1 2
6*
4A
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
17ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
9.0 RECOMMENDED SPARE PARTS: PLATINUM SERIES
STANDARD OPERATIONAL COMPONENTS
ITEM PART NO. DESCRIPTION QTY REQ’D
1 026-CB-BGP Control Board Assembly 1
2 026-XXXXXX-BGP Relay Board Assembly
See Section 10.2 1
3 026-PBXXX-BGP Power Board Assembly
See Section 10.2 1
4 026-IO-BGP PCB, BGP, I/O 1
5 028-588 Disconnect Switch 1
STANDARD OPERATIONAL COMPONENTS
ITEM PART NO. DESCRIPTION QTY REQ’D
6 028-586 Receptacle GFI 1
7
028-605 4 A Circuit Breaker (Shown)
1
026-746 15 A Circuit Breaker
8 See Section 15.2 Fuse Control —
9 See Section 15.2 Fuse Power —
10 026-G030 Ribbon Cable (16C) 1
* Optional

OWNER’S MANUAL
BLUE GENIUS™TOUCH CONTROL
MASTER CONTROL PANELS
ISSUE DATE:JULY 15, 2014 REV.0 (PART# 038-918E)STARTINGFROM SERIAL # 379183-01
Do not operate or service this product unless you have
read and fully understand the entire contents of this
manual. Failure to do so may result in property damage,
bodily injury or death.
WARNING
ACTUAL PRODUCT MAYNOT APPEAR EXACTLY AS SHOWN
123
4
5
6
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
18 ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
10.0 EQUIPMENT COMPONENT ILLUSTRATIONS: PLATINUM SERIES
10.1 COMPONENTS AS SHIPPED CHECK LIST: PLATINUM SERIES
CONTROL AND
COMPONENTS
ITEM QTY PART NO. DESCRIPTION APPROX. WEIGHT
1 1
BGP-4-XXXXX-X
Dependent on voltage
See Section 10.2
Blue Genius™ Platinum Series Control Panel 25 - 35 lb 11 - 16 kg
2 1 025-G012-1 Mounting Tabs with Hardware (1 pkg. of 4) — —
3 1 038-225
E
Exterior Driver Warning Sign 0.7 lb 0.32 kg
F
S
P
4 1 032-461 LED Exterior Driver Traffic Light 1.3 lb 0.6 kg
5 1 038-918
E
Owner's Manual (this one) — —F
S
6 1 Dependent on model #
E
Operation Placard(s) — —F
S

8
2
17
12
16
13
F20
F21
F22
18
15
14
10
21
5
24
6
4
925
1
19
20
F2
F1
F3
F4
F5
11
37
26
23
F23
BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
19ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
22
Wiring Diagram Enclosed
10.2 MECHANICAL ASSEMBLY: PLATINUM SERIES

BLUE GENIUS™ TOUCH CONTROL MASTER CONTROL PANELS—OWNER’S MANUAL
20 ISSUE DATE: OCTOBER 17, 2016 REV.1 (PART # 038-918E)
10.2 MECHANICAL ASSEMBLY: PLATINUM SERIES CONT'D.
AS PER VOLTAGE - SEE ITEM 1
ITEM QTY PART NO. DESCRIPTION USE
B 1 026-G101 Fuse, 8A, 250V
for 1PH, 208-240V TL85
C 1 026-G102 Fuse, 0.5A, 250V
for 1 and 3PH, 208-240V
D 1 026-237-1 Fuse, 2.5A, 250V, Fast Blow
E 1 026-G104 Fuse, 0.75A, 250V,
for 1PH, 110-130V
F 1 026-G105 Fuse, 500mA, 700V
for 3PH, 380-415V
G 1 026-G106 Fuse, 400mA, 700V
for 3PH, 440-480V
H 1 026-G107 Fuse, 315mA, 700V
for 3PH, 575-600V
J 1 026-G123 Fuse, 5A, 250V
for 1PH 110-130V HVR303
* Language on decal: F = English / French S = English / Spanish
◊ Location on Power Board † Includes Fuses
COMPLETE CONTROL STATION ASSEMBLY - ITEM 1 (Example BGP-4-460-115F)
ITEM ◊FUSE QTY PART NO. DESCRIPTION ASSY PART # *
2
SINGLE PHASE - POWER BOARD
F1
F2
F3
F4
F5
B 2 026-PB115-BGP Power Board †
Assembly, 115V, 1PH BGP-4-115 F
C 3 S
D 2 026-PB230-BGP Power Board †
Assembly, 230V, 1PH BGP-4-230-115 F
C 3 S
THREE PHASE - POWER BOARD
F1
F2
F3
F4
F5
D 2 026-PB230-BGP Power Board †
Assembly, 230V, 3PH BGP-4-230-115 F
C 3 S
F 2
026-PB400-BGP Power Board †
Assembly, 400V, 3PH
BGP-4-460-115 F
S
C 3 BGP-4-460-230 F
S
G 2
026-PB460-BGP Power Board †
Assembly, 460V, 3PH
BGP-4-460-115 F
S
C 3 BGP-4-460-230 F
S
E 2
026-PB575-BGP Power Board †
Assembly, 575V, 3PH
BGP-4-575-115 F
S
C 3 BGP-4-575-230 F
S
3
SINGLE PHASE - RELAY BOARD
F20
F21
F22
F23
J 4 026-RB1230-BGP
Relay Board
Assembly,
115-220V, 1PH
BGP-4-115
F
S
THREE PHASE - RELAY BOARD
F20
F21
F22
F23
J 4 026-RB3230-BGP Relay Board
Assembly 220V, 3PH BGP-4-230-115 F
S
J 4 026-RB3575-BGP
Relay Board
Assembly
400-575V, 3PH
BGP-4-460-115 F
S
BGP-4-460-230 F
S
BGP-4-575-115 F
S
BGP-4-575-230 F
S
41
026-381 Transformer,
1000VA, 240V-120V BGP-4-230-115
026-380 Transformer,
1000VA, 480V-120V BGP-4-460-115
026-382 Transformer,
1000VA, 480V-240V BGP-4-460-230
026-383 Transformer,
1000VA, 600V-120V BGP-4-575-115
026-384 Transformer,
1000VA, 600V-240V BGP-4-575-230
026-385
Transformer,
2000VA, 480V - 120V BGP-4-460-115
Transformer,
2000VA, 480V - 240V BGP-4-460-230
Transformer,
2000VA, 600V - 120V BGP-4-575-115
Transformer,
2000VA, 600V - 240V BGP-4-575-230
ITEM QTY PART NO. DESCRIPTION
5 1 025-G012-A Enclosure
6 1 025-G030-A Assembly, Plate, Backing
7 1
025-G035 Assembly, DIN Rail, BGP(4A)
025-G036 Assembly, DIN Rail, BGP (15A)
8 1 028-592 Shaft, Disconnect
9 1 025-G031-A Divider Plate
10 1 038-400E FDecal, Blue Genius™ Platinum Series *
S
11 1 028-590 Rotary Disconnect Handle
12 1 026-IO-BGP PCB, BGP, I/O
13 1 026-CB-BGP Control Board Assembly
14 1 028-586 GFI Receptacle 120V (4A STD. 15A OPT.)
15 1 028-587 Receptacle Cover
16 1 026-G030 Ribbon Cable
17 1 026-G028 Audible Speaker
18 4 025-G012-1 Mounting Tabs
19 1 026-G048-A Cable Assembly, BGP, I/O-RLY, 28.5," 8Pins
20 1 026-G049-A Cable Assembly, BGP, PSU-I/O, 13.5," 10Pins
21 1 038-283ESF Decal, Do Not Drill
22 1 038-853E FWarning Decal *
S
23 1 026-615-1 Anti-Static Poly Bag (Wiring Diagram
Enclosed - Serial # req'd for diagram)
24 1 038-284E FDecal, Serial Plate *
S
25 2 025-G032 Hinge Kit, DSE Control Box
26 1 030-907 Enclosure Frame, BGP