Sony MKS-8010A User manual

CENTER CONTROL PANEL PACK
CCP-8000
INSTALLATION MANUAL
2nd Edition (Revised 2)
MKS-8010A
HK-PSU02
MKS-8011A MKS-8013A MKS-8014A
MKS-8015A MKS-8017A MKS-8018A
MKS-8019A MKS-8020A MKS-8021A
MKS-8021ASC MKS-8022A MKS-8022ASC
MKS-8023A MKS-8023AB MKS-8024A
MKS-8025MS MKS-8026A MKS-8027A
MKS-8028A MKS-8030A MKS-8031AJS
MKS-8031ATB MKS-8032A MKS-8033A
MKS-8034ADK MKS-8034AFB MKS-8035A
MKS-8036A MKS-8040 MKS-8041
MKS-8042 MKS-8075A MKS-8076
SWC-5002 SWC-5005 SWC-5010

CCP-8000 IM
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
MKS-8010A Serial No. 10001 and Higher
MKS-8011A Serial No. 10001 and Higher
MKS-8013A Serial No. 10001 and Higher
MKS-8014A Serial No. 10001 and Higher
MKS-8015A Serial No. 10001 and Higher
MKS-8017A Serial No. 10001 and Higher
MKS-8018A Serial No. 10001 and Higher
MKS-8019A Serial No. 10001 and Higher
MKS-8020A Serial No. 10001 and Higher
MKS-8021A Serial No. 10001 and Higher
MKS-8021ASC Serial No. 10001 and Higher
MKS-8022A Serial No. 10001 and Higher
MKS-8022ASC Serial No. 10001 and Higher
MKS-8023A Serial No. 10001 and Higher
MKS-8023AB Serial No. 10001 and Higher
MKS-8024A Serial No. 10001 and Higher
MKS-8025MS Serial No. 10001 and Higher
MKS-8026A Serial No. 10001 and Higher
MKS-8027A Serial No. 10001 and Higher
MKS-8028A Serial No. 10001 and Higher
MKS-8030A Serial No. 10001 and Higher
MKS-8031AJS Serial No. 10001 and Higher
MKS-8031ATB Serial No. 10001 and Higher
MKS-8032A Serial No. 10001 and Higher
MKS-8033A Serial No. 10001 and Higher
MKS-8034ADK Serial No. 10001 and Higher
MKS-8034AFB Serial No. 10001 and Higher
MKS-8035A Serial No. 10001 and Higher
MKS-8036A Serial No. 10001 and Higher
MKS-8040 Serial No. 10001 and Higher
MKS-8041 Serial No. 10001 and Higher
MKS-8042 Serial No. 10001 and Higher
MKS-8075A Serial No. 10001 and Higher
MKS-8076 Serial No. 10001 and Higher
HK-PSU02 Serial No. 10001 and Higher
SWC-5002 Serial No. 10001 and Higher
SWC-5005 Serial No. 10001 and Higher
SWC-5010 Serial No. 10001 and Higher

CCP-8000 IM
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
make sure that the rack does not overload the supply
circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confirm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specified limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make
sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
5. Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer
to the specifications of the Operation Manual.
6. When performing the installation, keep the rear of
the unit 10 cm (4 inches) or more away from walls
in order to obtain proper exhaust and radiation of
heat.
When using a LAN cable:
For safety,do not connect to the connector for
peripheral device wiring that might have excessive
voltage.
1 (P)
Voor de Klanten in Nederland
Gooi de batterij niet weg, maar lever hem in als KCA.
Voor het verwijderen van de batterij kunt u contact
opnemen met uw Sony onderhoudsdienst.
Für Kunden in Deutschland
Batterien und Akkus gehören in den Sondermüll. Unter
keinen Umständen mit dem normalen Haushaltsmüll
entsorgen.
Zum Entnehmen der Batterie wenden Sie sich bitte an
lhren Sony Kundendienst.

1
CCP-8000 IM
Table of Contents
Manual Structure
Purpose of this manual ................................................................. 3
Related manuals ........................................................................... 3
Contents ........................................................................................ 3
1. Installation
1-1. Operating Environment .................................................. 1-1
1-2. Power Supply ..................................................................1-1
1-3. Installation Space ............................................................ 1-2
1-3-1. External Dimensions ............................................. 1-2
1-3-2. Main Panel/AUX Panel Configuration List .......... 1-6
1-3-3. Installation Space .................................................. 1-8
1-4. Installing the Main Panel .............................................. 1-12
1-5. Installing the AUX Panel ..............................................1-13
1-6. Installing Menu Panel ...................................................1-14
1-7. Rack Mounting ............................................................. 1-15
1-7-1. Rack Mounting the System Control Unit
MKS-8010A ........................................................ 1-15
1-7-2. Rack Mounting the MKS-8075A
(Extension Adaptor)/MKS-8076
(Memory Card/USB Adaptor) .............................1-17
1-8. Matching Connectors and Cables ................................. 1-18
1-9. Input/Output Signals of Connectors ............................. 1-19
1-10. Checks on Completion of Installation .......................... 1-21
1-10-1. Description of On-board Switches and LEDs ..... 1-21
1-11. System Connection ....................................................... 1-23
1-11-1. System Connection of the MVS-8000 Series ...... 1-23
1-11-2. Connecting the Center Control Panel .................. 1-24
2. Installing the Options
2-1. Opening and Closing the Front Panel ............................. 2-1
2-2. Installing the HK-PSU02 ................................................ 2-2
2-3. Installing the Operation Modules ...................................2-2
2-3-1. Installing Modules ................................................. 2-2
2-4. Connecting the MKS-8075A/MKS-8076 .......................2-8
2-4-1. How to Connect the MKS-8075A and
the MKS-8076 ....................................................... 2-8
2-4-2. How to Connect the Cables ................................. 2-12
3. Service Overview
3-1. Troubleshooting .............................................................. 3-1
3-1-1. MKS-8010A .......................................................... 3-1
3-1-2. MKS-8011A .......................................................... 3-1
3-1-3. Main Panel/AUX Panel .........................................3-2
3-2. Periodic Inspection and Maintenance ............................. 3-2
3-2-1. Periodic Inspection ................................................ 3-2
3-2-2. Cleaning ................................................................ 3-3
3-3. About the Data Backup Capacitor .................................. 3-4

3
CCP-8000 IM
Purpose of this manual
This manual is the installation manual of Center Control Panel Pack CCP-8000 and
the optional boards and units.
This manual is intended for use by trained system and service engineers, and
describes the information on installing the CCP-8000.
Related manuals
The following manuals are prepared for CCP-8000 and the optional boards and
units.
..
..
.Operation Manual (Supplied with CCP-8000)
This manual describes the overview, system connection example and specifica-
tions of options of CCP-8000.
..
..
.User’s Guide (Volume 1, Volume 2) (Supplied with CCP-8000)
This manual describes the application and operation of CCP-8000.
..
..
.Maintenance Manual (Available on request)
This manual describes the detailed service information.
If this manual is required, please contact your local Sony Sales Office/Service
Center.
Contents
This manual is organized by following section.
Section 1 Installation
This section describes the operating environment, power supply, installation space,
rack mounting, connectors, input and output signals of connectors, checking upon
completion of installation, system configuration, and setup.
Section 2 Installing the Options
This section describes the installation of option.
Section 3 Service Overview
This section describes the troubleshooting and periodic inspection and maintenance.
Manual Structure

1-1
CCP-8000 IM
Section 1
Installation
1-1. Operating Environment
Operating guaranteed temperature : +5 dC to +40 dC
Performance guaranteed temperature : +10 dC to +35 dC
Operating humidity : 10 % to 90 %
Storage temperature : _20 dC to +60 dC
Mass
MKS-8010A : Approx. 11 kg
Main panel (4ME): Approx. 42 kg
(3ME): Approx. 24 kg
(2ME): Approx. 20 kg
Prohibited locations for installation
.Areas where the unit will be exposed do direct sunlight
or any other strong lights.
.Dusty areas
.Areas subject to vibration.
.Areas with strong electric or magnetic fields.
.Areas near heat sources.
.Areas where is subject to electrical noise.
.Areas subject to static electricity.
Ventilation
The inside of the MKS-8010A is cooled by a fan (side on
the rear).
The power supply can be damaged if the exhaust vent (side
on the rear) and air intake (front panel) are blocked or the
fan is stopped.
For the MKS-8010A, leave a blank space of more than 10
cm in the front and back sides, and more than 5 cm in the
right and left sides.
1-2. Power Supply
1. Power specifications
A switching regulator is used for the power supply of
MKS-8010A. A voltage within the range of 100 V to 240
V can be used without changing the supply voltage.
Power requirements: AC 100 to 240 V ±10 %
Power frequency: 50/60 Hz
Current consumption: MKS-8010A: Maximum 3.0 A
n
As the inrush current flows at turn-on, the capacity of the
AC power source must be commensurate with this load.
If the capacity of the AC power is not adequately large, the
AC power source breaker will operate or the unit will
abnormally operate.
Inrush current
MKS-8010A: Maximum 14 A (at 100 V)/64 A (at 240 V)
2. Recommended power cord
This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
.Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
.Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
.Never use an injured power cord.
.Plugging the power cord in the AC inlet, push as far as it
will go.
For customers in the U.S.A. and Canada
1Power cord, 125 V 10 A (2.4 m) : !1-551-812-31
AC inlet
1
For customers in the all European countries
1Power cord, 250 V 10 A (2.5 m) : !1-782-929-12
1
AC inlet

1-2 CCP-8000 IM
1-3. Installation Space
1-3-1. External Dimensions
System control unit MKS-8010A
440
520
7
43.6
63.1
52.2 390
ø26
372
482
Unit : mm

1-3
CCP-8000 IM
Main panel/AUX panel/Menu panel MKS-8011A
1304
652
1407
69.569.5
782
49 59.7
59
98
73
72
4873
300 104
9.5
57
80
220
160
213
424
132
46
1443
528
DSK1 DSK2 DSK3 DSK4
DSK1 DSK2 DSK3 DSK4 DSK1 DSK2 DSK3 DSK4
K-TR ENBL
AUTO
TRANS
CUT
/REV NORM
REVNORM
PRIOR
SET
TRANS
PVW
BKGD
PRIOR
SUPER
MIX
KEY
MIX NAM
ALL WIPE
PST
COLOR
MIX
DME
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
ONONONON
DMEWIPEMIX
K-SS
LIMIT
SET
PTN
LIMIT
KF
K-MOD
ENBL
K-SS
STORE
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4
K-TR ENBL
AUTO
TRANS
CUT
/REV NORM
REVNORM
PRIOR
SET
TRANS
PVW
BKGD
PRIOR
SUPER
MIX
KEY
MIX NAM
ALL WIPE
PST
COLOR
MIX
DME
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
ONONONON
DMEWIPEMIX
K-SS
LIMIT
SET
PTN
LIMIT
KF
K-MOD
ENBL
K-SS
STORE
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4
K-TR ENBL
AUTO
TRANS
CUT
/REV NORM
REVNORM
PRIOR
SET
TRANS
PVW
BKGD
PRIOR
SUPER
MIX
KEY
MIX NAM
ALL WIPE
PST
COLOR
MIX
DME
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
ONONONON
DMEWIPEMIX
K-SS
LIMIT
SET
PTN
LIMIT
KF
K-MOD
ENBL
K-SS
STORE
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4
K-TR ENBL
AUTO
TRANS
CUT
/REV NORM
REVNORM
PRIOR
SET
TRANS
PVW
BKGD
PRIOR
SUPER
MIX
KEY
MIX NAM
ALL WIPE
PST
COLOR
MIX
DME
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
AUTO
TRANS
ONONONON
DMEWIPEMIX
K-SS
LIMIT
SET
PTN
LIMIT
KF
K-MOD
ENBL
K-SS
STORE
M/E
32
M/E M/E
2K 3K
M/E
FTB
AUTO
M/E
1
DME
V
DME
K
P/PPST
M/E P/P
1K
K
SEL
BANK
1
BANK
0
BANK
STATS STORE
UNDOWIPE
DME
SNAP SHOT
EFF
SHOT
BOX
MCRO
TRANS
RATE
SEL
BANK
1
BANK
0
BANK
STATS STORE
UNDOWIPE
DME
SNAP SHOT
EFF
SHOT
BOX
MCRO
TRANS
RATE
SEL
BANK
1
BANK
0
BANK
STATS STORE
UNDOWIPE
DME
SNAP SHOT
EFF
SHOT
BOX
MCRO
TRANS
RATE
EDIT ENBL
RUN
GO TO
PASTE
STOP NEXT
KF
NORM REV NORM /REV
FF
RE
WIND
KF
DUR
EFF DUR
KF
LOOP
PAUSE
CONST
DUR TC
GO TO
KF
COPY ALL
FROM
TO
DEL MOD UNDO
SHIFT INS
PREV
KF
NEXT
KF
TURN OVER
DELAY
EFF
LOOP
M/E
2
M/E
3
P/P
AUTO
SEL
8765
432
DME DME DME DME
DMEDMEDME
1
DME
MORE
MASK
SUB
LINE
OUT
SHDW
BDR
DROP
FILL
MATTE
SPLIT
PTNCVKCRKLUM
KEY1
KEY
PROC
RIDE OVER
FM
MASK
FEED
MAIN AUTO
DELEG
BDR
1
M/E KEY
SHOW
MON
ZABTN TRACE
EDGE SOFT
DROP
KEY
LIN
TRANSKEY4KEY3KEY2 EMBOS
M/E M/E
23
P/P
87
654 321
AUTO
EFF
9
ENTER
0
TRANS
CLR
DME
EFF
SNAP SHOT
SHOT
BOX
MCRO
TRANS
RATE
ALL P-BUS GPI
M/E
1
USER
1
USER USER USER
234
RTR
DME
1
DME DME
234
DEV
1
DME
5
DME DME DME DEV
6782
+/-
DISS
RCALL
UNDO
STORE STATS
TC
STORE
TRIM
ENBL
GPI
MASTR
P/P
M/E M/E
23
P/P
P/P
5
M/E
1
DME DME
DME DME
DME DME
123
67
MENU
CLR
LOC
BUFR
SIZE
SHIFT WORK
DEV
DME
8 Y CTR
LOCAL
SKEW
ASP
PERS
LOC
GLB
DME
4
AXIS
LOC
X
XYZ
ROT
Z
USER
SRC TRGT
RUN
CTRL
DSK3 DSK4
2
M/E
2
M/E
2
M/E
2
M/E
3
M/E
3
M/E
3
M/E
3
M/E
BLACK BLACK
SHIFT SHIFT
BLACK BLACK
SHIFT SHIFT
1
M/E
1
M/E
UTIL
RUN
AUTO
ENBL MCRO HOLD
XPT
HOLD
XPT
SHIFT
HOLD
XPT
1
M/E
HOLD
XPT
1
M/E
ASGN MCRO KEY3 KEY4
32
M/EM/E
32
M/EM/E
32
M/EM/E
32
M/EM/E
SHIFT SHIFT
BLACK BLACK
BLACK BLACK
SHIFT SHIFT
1
M/E
1
M/E
UTIL
RUN
AUTO
ENBL MCRO HOLD
XPT
HOLD
XPT
SHIFT
HOLD
XPT
1
M/E
HOLD
XPT
1
M/E
ASGN MCRO KEY3 KEY4
32
M/EM/E
32
M/EM/E
32
M/EM/E
32
M/EM/E
SHIFT SHIFT
BLACK BLACK
BLACK BLACK
SHIFT SHIFT
1
M/E
1
M/E
UTIL
RUN
AUTO
ENBL MCRO HOLD
XPT
HOLD
XPT
SHIFT
HOLD
XPT
1
M/E
HOLD
XPT
1
M/E
ASGN MCRO KEY3 KEY4
32
M/EM/E
32
M/EM/E
32
M/EM/E
32
M/EM/E
SHIFT SHIFT
BLACK BLACK
BLACK BLACK
SHIFT SHIFT
1
M/E
1
M/E
UTIL
RUN
AUTO
ENBL MCRO HOLD
XPT
HOLD
XPT
SHIFT
HOLD
XPT
1
M/E
HOLD
XPT
1
M/E
ASGN MCRO KEY3 KEY4
32
M/EM/E
32
M/EM/E
32
M/EM/E
32
M/EM/E
SHIFT SHIFT
BLACK BLACK
BLACK BLACK
SHIFT SHIFT
1
M/E
1
M/E
UTIL
RUN
AUTO
ENBL MCRO HOLD
XPT
HOLD
XPT
SHIFT
HOLD
XPT
1
M/E
HOLD
XPT
1
M/E
ASGN MCRO KEY3 KEY4
32
M/EM/E
32
M/EM/E
32
M/EM/E
32
M/EM/E
SHIFT SHIFT
BLACK BLACK
BLACK BLACK
SHIFT SHIFT
1
M/E
1
M/E
UTIL
RUN
AUTO
ENBL MCRO HOLD
XPT
HOLD
XPT
SHIFT
HOLD
XPT
1
M/E
HOLD
XPT
1
M/E
ASGN MCRO
Unit : mm

1-4 CCP-8000 IM
Unit : mm
Menu panel MKS-8011A detailed dimensions
424
213
276
13
32
46 14.5
416
378
17.7
27.3
117.7 160
220
147.8
52.3
6-M3

1-5
CCP-8000 IM
Extension adaptor MKS-8075A/Memory card/USB adaptor MKS-8076
263
79
85
91
396
BANK
1
BANK
2
BANK
3
BANK
4
DSK3
DSK4
DSK3
ONONON
DSK2
ON
DSK1
DSK1
DSK4
DSK2
K-SS
STORE
TAKE TAKE TAKE TAKE
WIPE
MIX
DME
CUT
K-SS
SHIFT
UNDO
Unit : mm

1-6 CCP-8000 IM
1-3-2. Main Panel/AUX Panel Configuration List
3ME
FULL
4ME
2ME
AUX
ONLY
FULL
ONLY
-IN
BUILT
BUILT
-IN
ME
SEPARATE
SEPARATE
SEPARATE
SEPARATE
32XPT 24XPT 16XPT 24XPT32XPT 16XPT
NARROW MEDIUM
432NF ASSY 424NF ASSY
424NO ASSY432NO ASSY
324NB ASSY332NB ASSY
324NF ASSY
332NO ASSY 324NO ASSY
232NB ASSY 224NB ASSY
332NF ASSY 316NF ASSY
416NO ASSY
416NF ASSY
216NB ASSY
316NO ASSY
316NB ASSY
232MB ASSY 224MB ASSY
332MO ASSY
332MF ASSY
324MO ASSY
324MF ASSY
324MB ASSY
424MO ASSY432MO ASSY
332MB ASSY
424MF ASSY432MF ASSY
316MF ASSY
316MB ASSY
416MO ASSY
316MO ASSY
216MB ASSY
416MF ASSY
528 132
1223
528 132
1223
782
528
1223
396 132
1223
782
396 132
1223
396
1223
528 132
1071
528 132
1071
630
528
1071
1071
396 132
132
1071
396
630
396
1071
528 132
919
528 132
478
919
528
919
396 132
919
132
396
478
919
396
919
528 132
1369.7
782
132
528
1369.7
528
1369.7
396 132
1369.7
132
396
782
1369.7
396
1369.7
528 132
1217.7
528 132
630
1217.7
528
1217.7
396 132
1217.7
396
630
132
1217.7
396
1217.7
528 132
1065.7
132
528
478
1065.7
528
1065.7
396 132
1065.7
478
396 132
1065.7
396
1065.7
NARROW: Configuration that a module having width of 220 mm such as 10 Key Pad Module MKS-8026A is installed outside of the panel
with the use of the Extension Adaptor MKS-8075A.
MEDIUM: Configuration that the Compact Transition Module MKS-8027A / 8028A is going to be used.
STANDARD: Configuration that a module having width of 220 mm such as 10 Key Pad Module MKS-8026A is installed inside the panel.
WIDE: Configuration that the Simple Transition Compact Module MKS-8021ASC / 8022ASC is going to be used.

1-7
CCP-8000 IM
Unit : mm
24XPT32XPT 16XPT
STANDARD
32XPT 16XPT24XPT
232TB ASSY 224TB ASSY
332TO ASSY
332TF ASSY
324TO ASSY
324TF ASSY
324TB ASSY
424TO ASSY432TO ASSY
332TB ASSY
424TF ASSY432TF ASSY
316TF ASSY
316TB ASSY
416TO ASSY
316TO ASSY
216TB ASSY
416TF ASSY
WIDE
416WF ASSY
216WB ASSY
316WO ASSY
416WO ASSY
316WB ASSY
316WF ASSY
432WF ASSY 424WF ASSY
332WB ASSY
432WO ASSY 424WO ASSY
324WB ASSY
324WF ASSY
324WO ASSY
332WF ASSY
332WO ASSY
224WB ASSY232WB ASSY
528 132
478
1212.3
396
1212.3
396 132
478
1212.3
396 132
1212.3
528
1212.3
528 132
1212.3
396
1364.3
396
630
132
1364.3
396 132
1364.3
528
1364.3
528 132
630
1364.3
528 132
1364.3
396
1516.3
396 132
782
1516.3
396 132
1516.3
528 132
1516.3
528 132
782
1516.3
528
1516.3
1443
528 528 132
1443
782
528 132
1443
1443
396 132
396 132
1443
782
396
1443
1291
528 132
528 132
1291
630
528
1291
1291
396 132
396
1291
630
132
396
1291
528 132
1139
528
1139
396 132
1139
396 132
478
1139
396
1139
528 132
478
1139

1-8 CCP-8000 IM
1-3-3. Installation Space
.When the main panel or the AUX panel are recessed into a control console or similar, make holes as
shown below into the control console with the following dimensions.
.Be sure to have an open space behind the cables of the connectors on the main panel, shown as the open
space at “A” in the illustrations.
.For the dimensions B1, B2, B3, C1 and C2 shown in the illustrations, refer to “Main Panel / AUX Panel
Detailed Dimensions” in this section.
X1±0.5
C1
57.2
B1.1/2
B1
5.55.5
88.988.988.988.9 2
(Recommendation)
11.5
(Recommendation)
132.1 132.1 132.1
B2.1/2
B2
5.5 5.5
19
40
20
100
20
X2±0.5
C2
To p
Bottom
Open space at “A”
4-M5
<AUX panel>
Open space at “A”
16-Ø5 hole with
depth of 3 or more
8-M4
<Main panel x4 lines>
. 4ME
. 3ME with built in AUX bus
as a single unit
To p
Bottom
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
X2
1205
1053
901
1351.7
1199.7
1047.7
1425
1273
1121
1498.3
1346.3
1194.3
NARROW
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
SHORT SIZE
765
613
461
765
613
461
765
613
461
765
613
461
FULL SIZE
1205
1053
901
1351.7
1199.7
1047.7
1425
1273
1121
1498.3
1346.3
1194.3
TYPE X1
NARROW
MEDIUM
STANDARD
WIDE
TYPE
MEDIUM
STANDARD
WIDE
Unit : mm

1-9
CCP-8000 IM
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
X2
1205
1053
901
1351.7
1199.7
1047.7
1425
1273
1121
1498.3
1346.3
1194.3
NARROW
88.988.988.9
132.1 132.1
B3.1/2
B3
5.5
19
20
100
40
20
X2±0.5
C2
Open space at “A”
11.5
(Recommendation)
12-Ø5 hole with
depth of 3 or more
6-M4
Open space at “A”
<Main panel x3 lines>
. 3ME with AUX bus
separate type
. 2ME
To p
Bottom
TYPE
MEDIUM
STANDARD
WIDE
Unit : mm

1-10 CCP-8000 IM
Unit : mm
Main panel/AUX panel detailed dimensions
The dimensions B1, B2, B3, C1, and C2 shown in the illustrations vary depending on the product dimen-
sions, the product dimensions on the installation surface, and the maximum external dimensions during
installation. Determine the above five dimensions so that the appropriate clearance can be obtained
between the panel and the console.
15.4 110
71.5
60.5
48.3
48
10.8
8.5
(2)
69
61
22.3
B2
459.2
299.7
B3
327.1
209.8
85.8
101.1
32.7
36.7
42.6
56.4
(11.5)
16.6
15.4
39.6
L1
80
80 40
15
L2
110
74
8.5 5.5
70
61
22.3
8.5
5.5
*3 398±0.6 *2 396.7±0.6
*1 396±0.6
Ø50
32.7
36.7
48.4
61.2
(11.5)
16.6
95.5 9
5.5
B1
*2 131.6±0.2
E portion
Product dimension (tolerance±1)
(Refer to the table below.)
Product dimension (tolerance±1)
(Refer to the table below.)
Ø50
Ø50 Ø50
Details of the E portion
<Main panel x3 lines>
E portion
F portion
Details of the F portion Details of the G portion
G portion
<Main panel x4 lines>
<AUX panel>
<Main panel x4 lines>
<Main panel x3 lines>
*1 : Product dimension
*2 : Product dimension on the installation surface
*3 : Maximum external dimensions during installation
*1*2*3
C1
*3 530±0.6 *2 528.9±0.6
*1 528±0.6
D portion D portion
*1*2*3
C2
Product dimension (tolerance±1)
(Refer to the table below.)
Details of the D portion
Product dimensions
of the AUX PANEL
Product dimensions
of the MAIN PANEL
Product dimension (tolerance±1)
(Refer to the table below.)
L2
MEDIUM
NARROW
WIDE
STANDARD
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
32XPT
24XPT
16XPT
TYPE
5.5 5.5 8.58.5
C1 C1
557
466
384
667
585
515
667
585
515
667
585
515
1099
947
795
1245.7
1093.7
941.7
1319
1167
1015
1392.3
1240.3
1088.3
L1
1223
1071
919
1369.7
1217.7
1065.7
1443
1291
1139
1516.3
1364.3
1212.3
FULL/BUILD-IN SHORT
1223
1071
919
1369.7
1217.7
1065.7
1443
1291
1139
1516.3
1364.3
1212.3
782
630
478
782
630
478
782
630
478
782
630
478

1-11
CCP-8000 IM
78.578.5
22.6 7
16.6 21.5
9
57.2
88.9
66
245±0.5
66
21.5
9
132±0.3
6
7
3
4
5
1
2
66±0.15 924 (925) ±1.0
792 (792.8) ±0.9
660 (660.7) ±0.8
528 (528.5) ±0.7
396 (396.4) ±0.6
264 (264.3) ±0.5
132 (132.1)±0.3
263±0.6
245±0.5
66
±
0.15
5 6
43
21
483±1.0
1056 (1057.1) ±1.0
924 (925) ±1.0
792 (792.8) ±0.9
660 (660.7) ±0.8
528 (528.5) ±0.7
396 (396.4) ±0.6
264 (264.3) ±0.5
132 (132.1) ±0.3
7
263±0.6
X2±0.5
Panel side Panel side
<Vertical connection A, B> <Vertical connection C>
M3 (Remove these screws in the case of
the vertical connection C)
Ø5.5 hole
9x10 long hole
7
8
(Maximum number of
connections)
220 (Outside dimensions of case)
Dimensions in the case of the vertical connection A are shown. Dimensions in the case of the vertical connections B and C are shown in parentheses ( ).
220 (Outside dimensions of case)
8
(Maximum number of
connections)
440 (Outside dimensions of case)
465±0.8 (19-inch rack width)
Dimensions in the case of the vertical connection A are shown. Dimensions in the case of the vertical connections B and C are shown in parentheses ( ).
Unit : mm
Extension adaptor MKS-8075A/Memory card/USB adaptor MKS-8076 detailed dimensions

1-12 CCP-8000 IM
1-4. Installing the Main Panel
n
When installing the main panel into the control console, be
sure to install it with three persons or more.
Install the main panel by following the procedure de-
scribed below.
Tools required
For the 4-line configuration (4ME/3ME with built-in AUX
bus, as a single unit)
Screws (B4 x6) : 8 pcs
For the 3-line configuration (3ME with AUX bus separate
type/2ME)
Screws (B4 x6) : 6 pcs
1. Remove the module covers in the right and left.
2. Remove the screws and remove the cap (L) and (R)
respectively.
3. Two persons should hold the main panel while a third
person positions into the control console.
4. Fix the main panel to the control console with the
screws.
(The illustration below shows the 4-row configuration.)
5. Install all of the right and left module covers, and the
caps (L) and (R) by reversing the steps 1 and 2 of
removal.
Module cover
Cap
Module cover
B3 x 6
B3 x 6
Cap (R)
Cap (L)
B4 x6
B4 x6
Main panel