Blue Tiger SoundTRAX User manual

U s e r M a n u a l |S o u n d T R A X ™
800.935.1165
www.bluetigerusa.com

Thank you for purchasing the SoundTRAX™ by Blue Tiger.
Please read through this user manual before using your
headset to ensure your best experience.
Product Features
The SoundTRAX™by Blue Tiger has been designed to
provide you with a high quality music and calling
experience. Comfortable and fashionable, the
SoundTRAX™ will be your companion at home, the gym,
or anywhere you are when you want your music with you.
The SoundTRAX™is equipped with multiple connection
options including Bluetooth, microSD, and wired
connection. The SoundTRAX™ can last for up to 30 hours
of conitinuous use (up to 400 hours on standby) on a
single charge.

Getting Familiar with your SoundTRAX™

Bluetooth® Pair ing Instructions
1. Make certain your SoundTRAX™ is in the “Off” position.
2. Move the switch to Bluetooth and then hold down the multi-
function wheel for about 8-10 seconds to initiate pairing
mode. Upon activating pairing mode, the LED light will flash
to blue for a few seconds and then begin flashing blue/red.
3. Follow the operating instructions for your phone to allow
your device to search for a new Bluetooth connection.
4. Select the headset from your Bluetooth device list on your
phone and when asked, select “Yes” to confirm the
connection.
5. If a PIN, Passkey, or Passcode is required, enter “0000.”

If at any time you experience difficulty pairing your headset with
your device, Blue Tiger recommends that you turn off the
SoundTRAX™ and your phone and if possible, remove the
battery from your phone or device. Wait a few seconds and
then turn both devices back on and attempt pairing again from
step one.
Basic Operation in Bluetooth®Mode
All functions are based on the multi-function wheel
Call Control
Pairing Mode: Press and hold for 5-6 seconds
Voice-Dial: Press and hold for about 2 seconds and wait for
phone to respond
Redial: Press 2 times rapidly