Blue Wave NG4012TR User manual

STRIKER
40" TABLE TOP POOL TABLE
ASSEMBLY INSTRUCTIONS
NG4012TR
Please Do Not Hesitate to
Contact Our Consumer Hotline
at 800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!

THANK YOU!
Thank you for purchasing this product.
We work around the clock and around the globe to ensure that our products
maintain the highest possible quality. However, in the rare case of issues
during assembly or use of this product, please contact our Consumer Hotline
at 800-759-0977 for immediate assistance before contacting your retailer.
Please read the warranty information at the back of these assembly
instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
2

TABLE TOP 40'' POOL TABLE - NG4012TR
Parts List
HARDWARE PACK - NGP50751
PARTS
#9
1 pc
HEX WRENCH
#4
8 pcs
FLAT WASHER
#5
1 pc
BRUSH
#1
1 pc
TABLE BODY
#2
4 pcs
LEG
#10
2 pcs
CHALK
#3
8 pcs
BOLT
#6
1 pc
BILLIARD BALLS
#8
2 pcs
CUE STICK
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15
#7
1 pc
TRIANGLE
#2
#4
#4 #4
#1
#3
#3
#3
#9
#7
#6
#5
#10
#8
1
2
3
4
56
7
8
910 11
12 13 14 15
Not Sold Separately NGP5073 NGP50741 NGP50761NGP50674 NGP5048 NGP5077
40” x 21.5” x 4”
1/2” MDF
5.25” x 3” x 3”
ABS Plastic
7.5” ABS Plastic 1.5” Dia. 8” Sides 36”Wood
ABS Plastic
5/15
#11
8 pc
6mm NUT
For replacement parts please call 800-759-0977.
#11

ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. The table will be
partially assembled upside down and then turned over onto its legs. This is a heavy game
and turning it over will require at least two strong adults.
2. Remove all of the contents from box and verify that you have all of the parts shown on the
Note: Some parts may be pre-installed or
pre-assembled.
understand the text before beginning each assembly step.
4. When installing parts that have more than one screw or bolt, hand tighten all screws or
bolts in place before finishing tightening with screwdriver or hex wrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque
and use extreme caution because screws may be stripped or overtightened if the electric
screwdriver's torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS - NOT
SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
4

#1
#11
5
1. Attach one LEG #2 to each corner of the TABLE BODY #1 using BOLT #3, FLAT WASHER #4
and NUT #11, which is inserted into back of LEG hole. NOTE: the table is assembled upside down.
#11
#4
#3
#2
#4
#3
#1
#9
#4 #3