Bluedio HURRICANE HI TWS User manual

BLUEDIO HURRICANE HI TWS WIRELESS EARPHONES
User Manual

1. Air hole
2. Charging port
3. multifunction button
4. Microphone

5. Charging indicator
6. Charging button
Pairing instructions:
Method 1: Open the charging box, take out the left and right earphone, and
long-press the multifunction button. After the earphone is turned on, it enters the
pairing mode and both earphones are automatically connected.
Turn on the phone’s Bluetooth, search name of device "Hi" and click to connect.
Method 2: Put the earphone in the charging box, click the charging button on
the charging case, then open the charging case to take out the earphone, the
earphone will be automatically turned on and automatically be reconnected.
When both earphones are successfully connected, the LED indicator of the main
earphone blinks, while the indicator light of the secondary earphone is turned off.

How to use only one earphone:
To use just one earphone, firstly you must clear the pairing information of left
and right earphone.Two earphones can be paired with different mobile phones, or
they can be used separately. Press and hold the multifunction button to turn on or off
the earphone. (Turning off one of the earphones does not affect the use of the other
one).
How to clear the pairing information:
1. Press and hold the multifunction button to turn on the left and the right
earphone (the blue indicator light is always on after the earphone is turned
on), then press the multifunction button for three times on both earphones.
After this process, these two earphones will be automatically turned off and
the pairing information will be cleared.
2. Put the earphones back into the charging box, close the cover and clear the
pairing information of the phone.
3. Restart the earphone and turn on the Bluetooth of phone for Bluetooth pairing
Music control:
Click the multifunction button to pause/ playback your music. Double-click the
right earphone multifunction button to go to the previous track. Double-click the left
earphone multifunction button to switch to the next track.
Call control:
Click the multifunction button to answer/hang up the call; long press the
multifunction button to reject the call.
Last number redial:
Press the multifunction button for four times to redial the previous number.
Voice assistant:
Press and hold the multifunction button for a second and release it when a
sound.

On / off recognition:
Remove the earphones while playing music and the music will be
automatically paused. Then put on the earphones and resume playing music.(This
feature works only on the right earphone).
Charging:
Charging the earphones: Put the earphones in the charging box, close the
cover, and click the charging button on the charging box. During the charging
process, the blue light of the charging box is always on. When the blue light is off, it
means your earphones are fully charged.
Charging the charging box: When the LED light of the charging box flashes, it
indicates a low battery. Connect your charging case to the power source using the
included USB cable. During the charging process, the blue light of the charging box
flashes. When the blue light remains constantly on, it means the charging box is fully
charged.