BlueIOT BA3000-t User manual

BA3000-t
BlueIOT Anchor
USER MANUAL V.
BlueIOT (Beijing) Technology Co., Ltd
E-mail：inf[email protected]
website：www.blue-iot.com

Contents
1. Overview
1.1. Product Introduction
1.2. Typical Applications
2. Panel and Port
2.1. Anchor Front Panel
2.2. Anchor Back Panel
3. Installation and Power Supply
3.1. Installation
3.2. Power Supply
4. Network Connection
4.1. Wired Network
4.2. Network Configuration
5. Data Collection
6. Important Safety Information for BlueIOT Anchor
7. Important Handling Information for BlueIOT Anchor
8. Disposal and Recycling Information for BlueIOT Anchor
9. Limited Warranty
10. IP Statement
11. Responsibility Statement
12. Appendix - Basic Specifications
1.Overview
1.1. Product Introduction
BA3000-t High Precision Indoor Bluetooth Location Anchor uses Bluetooth Low Energy
(BLE) technology with advanced AOA/AOD algorithm and standard, which can achieve
functions such as precise locating, trace uploading and status collection of personnel and
objects indoor, while having high accuracy, high concurrency, low power consumption,
high compatibility and easy quick deployment, it is an effective solution for the demands
arising from Internet of Things, for precise spatial and status perception as well as
intelligent control and management.
1.2. Typical Applications
The typical application scenarios and accuracies of this product are as follows:
1
1
1
2
2
3
4
4
5
6
6
6
7
7
9
10
10
12
13
14
system
Multi-area space
Corridor space Room space
Method 1: Star connection
Method 1: Star connection
Method 2: Series connection
Method 2: Series connection
Bluetooth AOA sub-meter
level high precision
locating system
POE
Ethernet
data
backhaul
Locating
engine
Monitoring
terminals
Smart
terminals
BlueIOT Anchor User Manual |1

2. Panel and Port
2.1. Anchor Front Panel
The diagram and meanings of the product front panel are as follows.
2.2. Anchor Back Panel
The back panel of the Bluetooth AOA Location Anchor is used for installation and
unmounting, as shown in below figure.
Network indicator
Power Indicator
Location indicator
Permanent Green: no tag connection or tag connection failure.
Flashing Green: normal tag connection.
Location Indicator
1
Number Meaning Status Description
2
3
Power Indicator
Network Indicator
Permanent Green: normal power supply.
Permanent OFF: abnormal power supply.
Green when connected through ethernet.
Permanent OFF: no connection or connection failure.
Permanent ON or Blinking: normal network connection.
Label Area
1
Number Meaning Status Description
2
3
Reset Button
RJ45 Port Multiplexing port for POE power supply input or network
transmission; can connect to a standard POE Switch.
When powered on, press and hold the button for 10
seconds, the anchor will reset to factory default settings and
reboot. All indicators on the front panel flash three times
during reset.
Product ID and information.
RJ45 network port 1
Reset button
Label area
RJ45 network port 2
BlueIOT Anchor User Manual |32 |BlueIOT Anchor User Manual

3. Installation and Power Supply
3.1. Installation
This product is generally mounted on ceiling, but can also be suspended or installed
otherwise depending on the specific structure of the building ceiling. Before installation,
make sure that the connecting structure can withstand a downward pull of at least 50
Newton (N). This product should be installed at a maximum height of 20 meters and can
be installed in method illustrated below:
Fix the location anchor mount with wall plug at specific positions (according to the
technician's requirements), and then slide the anchor in place along the guideway on the
mount.
The location anchor collects and measures incoming tag signals, so the installation
location and the surrounding should meet certain standards. Note that:
There should be no electromagnetic shielding/jamming devices (e.g. mobile phone
jammer, WiFi jammer) in the vicinity of the installation location.
Avoid objects that can easily cause signal reflection, such as large size metal, large
screen.
The location anchor should have large visual coverage without obstruction. Never
install the location anchor above ceiling tiles (metal materiel like aluminum tile, or
non-metallic material such as gypsum board and glass panel), low-voltage cable trays,
fire ducts, air conditioning ducts, indoor green plants or other obstructions.
The location anchor should be installed in the correct direction with the front panel
facing downwards instead of upright or tilted.
3.2. Power Supply
This product adopts IEEE 802.3af standard version of POE power supply, uses Category 5e
(CAT 5e) network cable. Simply connect to a standard POE Switch or a location anchor to
achieve power supply to the location anchor. When connected, the power indicator of
the location anchor is green permanently.
Note that:
The POE power supply should not be more than 100 meters away, and should
preferably be controlled within 80 meters.
Easy-to-use circuit breakers shall be incorporated into the wiring system
BlueIOT Anchor User Manual |54 |BlueIOT Anchor User Manual

4. Network Connection
4.1. Wired Network
There are mainly two types of wiring methods between the location anchor and the
server, as shown in Figure 4.1.1 and 4.1.2:
5. Data Collection
The Bluetooth anchor is mainly used to receive and collect the locating and data
information sent by the Bluetooth tag. Its effective collection area is related to the on-site
deployment, and the number of tags that can be collected is related to the frequency of
tag data transmission.
When the tag leaves the effective collection area, the locating accuracy will be reduced or
cannot be located, and the data information cannot be transmitted. When the tag
returns to the effective collection area, the locating and data information transmission
can be resumed.
6. Important Safety Information for BlueIOT Anchor
WARNING: Failure to follow these safety instructions could result in fire, electric shock,
injury, or damage to BlueIOT Anchor or other property. Read all the safety information
below before using BlueIOT Anchor.
Handling Handle BlueIOT Anchor during transportation, installation and other cases with
care. BlueIOT Anchor contains sensitive electronic components and can be damaged if
dropped, burned, punctured, or crushed.
Repairing Don’t open BlueIOT Anchor and don’t attempt to repair BlueIOT Anchor
yourself. Disassembling BlueIOT Anchor may damage it, and may cause injury to you. If
BlueIOT Anchor is damaged or malfunctions, contact local distributor for help.
Powering BlueIOT Anchor uses IEEE 802.3af POE for power supply. Please use the
original adapter or selected adapter that meets the above specifications. It’s important to
keep BlueIOT Anchor and the power adapter installed in a well-ventilated area. Using a
BlueIOT Anchor power adaptor that’s damaged, using a third-party selected powering
solution which doesn't meet IEEE 802.3af POE or local safety regulation requirements, or
powering BlueIOT Anchor when moisture is present, can cause fire, electric shock, injury,
or damage to BlueIOT Anchor or other property.
Prolonged heat exposure BlueIOT Anchor complies with applicable surface tempera-
Anchor
Switch or router
Server
Anchor Server
Figure 4.1.1 Directly Connect via Network Cable
Figure 4.1.2 Connect via Network Switch or Router
4.2. Network Configuration
The location anchor uses fixed IP address to access the network, and does not support
DHCP function. The default factory IP address of the anchor is "192.168.1.X” at port
“48200”. The afore “X” in the IP address changes with the product, which can be obtained
from the information label on the product packaging.
Modify the IP address of your computer before changing the network settings of the
location anchor so that it is in the same network segment as the anchor. It is recom-
mended that the computer's network be configured as:
IP address: 192.168.1.11
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Specific parameters of the location anchor can be configured via the “Anchor Configura-
tion” module in the “Server Software”. Please refer to the related software manual for
details.
ture standards and limits. BlueIOT Anchor will become warm when plugged in to a
power source.
Radio frequency exposure BlueIOT Anchor uses radio signals to connect to Bluetooth
Tags. BlueIOT Anchor has been tested and meets applicable limits for radio frequency
(RF) exposure.
Radio frequency interference Observe signs and notices that prohibit or restrict the use
of electronic devices. Although BlueIOT Anchor is designed, tested, and manufactured to
comply with regulations governing radio frequency emissions, such emissions from
BlueIOT Anchor can negatively affect the operation of other electronic equipment,
causing them to malfunction. Unplug the BlueIOT Anchor power adaptor and the POE
cable when use is prohibited, or when asked to do so by authorities.
Medical device interference BlueIOT Anchor contains components and radios that emit
electromagnetic fields. These electromagnetic fields may interfere with medical devices,
such as pacemakers and defibrillators. Consult your physician and medical device
manufacturer for information specific to your medical device and whether you need to
maintain a safe distance of separation between your medical device and BlueIOT Anchor.
Stop using BlueIOT Anchor if you suspect they are interfering with your medical device.
Not a medical device BlueIOT Anchor is not a medical device and should not be used as
a substitute for professional medical judgment. It is not designed or intended for use in
the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or
prevention of any condition or disease. Please consult your healthcare provider prior to
making any decisions related to your health.
Not an absolutely reliable equipment BlueIOT Anchor is not intended for use where the
failure of the device could lead to death, personal injury, disease transmission or severe
environmental damage.
Explosive and other atmospheric conditions Powering on BlueIOT Anchor in any area
with a potentially explosive atmosphere, such as areas where the air contains high levels
of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may
be hazardous. Exposing BlueIOT Anchor to environments having high concentrations of
industrial chemicals, including near evaporating liquified gasses such as helium, may
damage or impair BlueIOT Anchor functionality. Obey all signs and instructions.
Choking hazard Some BlueIOT Anchor parts may present a choking hazard to small
children. Keep these parts away from small children.
7. Important Handling Information for BlueIOT Anchor
Exposure to liquid BlueIOT Anchor is not water resistant. Always avoid exposing BlueIOT
Anchor to liquids and moisture.
Cleaning and care Keep BlueIOT Anchor clean and dry, but avoid damaging BlueIOT
Anchor. Observe the following:
Don’t clean BlueIOT Anchor while it’s powering.
Don’t dry BlueIOT Anchor using any external heat source (for example, a hair dryer).
Don’t use cleaning products, ultrasonic cleaners, or compressed air when cleaning
your BlueIOT Anchor.
Using buttons, connectors, and ports Never apply excessive pressure to a button on
BlueIOT Anchor, or force a powering connector into a port, because this may cause
damage that is not covered under the warranty. If the connector and port don’t join with
reasonable ease, they probably don’t match. Check for obstructions and make sure that
the connector matches the port and that you have positioned the connector correctly in
relation to the port.
Operating temperature BlueIOT Anchor is designed to work best in ambient tempera-
tures between -4°F and 158°F (-20°C and 70°C) and be stored in temperatures between
-40°F and 185° F (-40°C and 85°C). BlueIOT Anchor can be damaged if stored or operated
outside of these temperature ranges. Avoid exposing BlueIOT Anchor to dramatic
changes in temperature or humidity.
Indoor Use BlueIOT Anchor is designed for indoor use only.
BlueIOT Anchor User Manual |76 |BlueIOT Anchor User Manual
Network Cable
Network Cable
Network Cable

6. Important Safety Information for BlueIOT Anchor
WARNING: Failure to follow these safety instructions could result in fire, electric shock,
injury, or damage to BlueIOT Anchor or other property. Read all the safety information
below before using BlueIOT Anchor.
Handling Handle BlueIOT Anchor during transportation, installation and other cases with
care. BlueIOT Anchor contains sensitive electronic components and can be damaged if
dropped, burned, punctured, or crushed.
Repairing Don’t open BlueIOT Anchor and don’t attempt to repair BlueIOT Anchor
yourself. Disassembling BlueIOT Anchor may damage it, and may cause injury to you. If
BlueIOT Anchor is damaged or malfunctions, contact local distributor for help.
Powering BlueIOT Anchor uses IEEE 802.3af POE for power supply. Please use the
original adapter or selected adapter that meets the above specifications. It’s important to
keep BlueIOT Anchor and the power adapter installed in a well-ventilated area. Using a
BlueIOT Anchor power adaptor that’s damaged, using a third-party selected powering
solution which doesn't meet IEEE 802.3af POE or local safety regulation requirements, or
powering BlueIOT Anchor when moisture is present, can cause fire, electric shock, injury,
or damage to BlueIOT Anchor or other property.
Prolonged heat exposure BlueIOT Anchor complies with applicable surface tempera-
ture standards and limits. BlueIOT Anchor will become warm when plugged in to a
power source.
Radio frequency exposure BlueIOT Anchor uses radio signals to connect to Bluetooth
Tags. BlueIOT Anchor has been tested and meets applicable limits for radio frequency
(RF) exposure.
Radio frequency interference Observe signs and notices that prohibit or restrict the use
of electronic devices. Although BlueIOT Anchor is designed, tested, and manufactured to
comply with regulations governing radio frequency emissions, such emissions from
BlueIOT Anchor can negatively affect the operation of other electronic equipment,
causing them to malfunction. Unplug the BlueIOT Anchor power adaptor and the POE
cable when use is prohibited, or when asked to do so by authorities.
Medical device interference BlueIOT Anchor contains components and radios that emit
electromagnetic fields. These electromagnetic fields may interfere with medical devices,
such as pacemakers and defibrillators. Consult your physician and medical device
manufacturer for information specific to your medical device and whether you need to
maintain a safe distance of separation between your medical device and BlueIOT Anchor.
Stop using BlueIOT Anchor if you suspect they are interfering with your medical device.
Not a medical device BlueIOT Anchor is not a medical device and should not be used as
a substitute for professional medical judgment. It is not designed or intended for use in
the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or
prevention of any condition or disease. Please consult your healthcare provider prior to
making any decisions related to your health.
Not an absolutely reliable equipment BlueIOT Anchor is not intended for use where the
failure of the device could lead to death, personal injury, disease transmission or severe
environmental damage.
Explosive and other atmospheric conditions Powering on BlueIOT Anchor in any area
with a potentially explosive atmosphere, such as areas where the air contains high levels
of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may
be hazardous. Exposing BlueIOT Anchor to environments having high concentrations of
industrial chemicals, including near evaporating liquified gasses such as helium, may
damage or impair BlueIOT Anchor functionality. Obey all signs and instructions.
Choking hazard Some BlueIOT Anchor parts may present a choking hazard to small
children. Keep these parts away from small children.
7. Important Handling Information for BlueIOT Anchor
Exposure to liquid BlueIOT Anchor is not water resistant. Always avoid exposing BlueIOT
Anchor to liquids and moisture.
Cleaning and care Keep BlueIOT Anchor clean and dry, but avoid damaging BlueIOT
Anchor. Observe the following:
Don’t clean BlueIOT Anchor while it’s powering.
Don’t dry BlueIOT Anchor using any external heat source (for example, a hair dryer).
Don’t use cleaning products, ultrasonic cleaners, or compressed air when cleaning
your BlueIOT Anchor.
Using buttons, connectors, and ports Never apply excessive pressure to a button on
BlueIOT Anchor, or force a powering connector into a port, because this may cause
damage that is not covered under the warranty. If the connector and port don’t join with
reasonable ease, they probably don’t match. Check for obstructions and make sure that
the connector matches the port and that you have positioned the connector correctly in
relation to the port.
Operating temperature BlueIOT Anchor is designed to work best in ambient tempera-
tures between -4°F and 158°F (-20°C and 70°C) and be stored in temperatures between
-40°F and 185° F (-40°C and 85°C). BlueIOT Anchor can be damaged if stored or operated
outside of these temperature ranges. Avoid exposing BlueIOT Anchor to dramatic
changes in temperature or humidity.
Indoor Use BlueIOT Anchor is designed for indoor use only.
BlueIOT Anchor User Manual |98 |BlueIOT Anchor User Manual

8. Disposal and Recycling Information for BlueIOT Anchor
BlueIOT Anchor disposal and recycling
Your BlueIOT Anchor should not be disposed of with household waste. Dispose of your
BlueIOT Anchor in accordance with local environmental laws and guidelines.
9. Limited Warranty
Warranty does not apply to:
Surface damage, such as scratches, dents and depressions.
Damage caused by accident, abuse, misuse, inflow, flooding, fire or external factors.
Damage caused from repairing by non-BlueIOT authorized warranty personnel.
Damage caused by modification or alteration of the product without the seller's
written consent.
In addition, the seller reserves the right to refuse the warranty application for products or
services obtained and/or used in violation of the laws of any country. This warranty
provides you with specific legal rights, but this right may vary from region to region. The
seller will not be responsible for any accidental, special, indirect or derivative damage
European Union—Disposal Information
The symbol above means that according to local laws and regulations your product
and/or its battery shall be disposed of separately from household waste. When this
product reaches its end of life, take it to a collection point designated by local authorities.
The separate collection and recycling of your product and/or its battery at the time of
disposal will help conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment.
(which may result from use, misuse, don't know how to use or product defects). The seller
reserves the right to overhaul or replace (new products or newly overhauled replacement
products) device or software. This is the sole and exclusive remedy for any breach of the
warranty terms. Please consult your local seller's authorized seller when applying for
warranty service.
*Non-human factors, one-year warranty period; the cost of logistics (shipment) shall be
borne by the users.
Note: If your device is purchased through a local seller, please contact the local seller for
the warranty service acquisition method. If your device was purchased directly by the
manufacturer, please get in touch via: [email protected].
Disclaimer: Depending on the design of usage location / environment and the way how it
is used, there could be false positives due to tissue, walls, structures or other factors and
false negatives due to bodily interference, electromagnetic interference, or other factors.
BlueIOT warranties that the BlueIOT Anchor performs to the requirements listed on the
BlueIOT Anchor specsheet.Allsalesarefinal.
Product name (including spare parts)
【Warranty card】
Limited warranty period
Accessories (e.g. adapter, charging cable) No warranty
BlueIOT Anchor (as entire product) 1 year
BlueIOT Anchor User Manual |1110 |BlueIOT Anchor User Manual

10. IP Statement
Trademark statement
"BlueIOT" trademarks, logos, and trademark combinations are registered trademarks of
BlueIOT(Beijing) Technology Co., Ltd.
Liability statement
To the maximum extent allowed by law, the products (including hardware, software, etc.)
described in this manual are provided "as is", there may be defects, errors or malfunctions,
the company does not provide any form of express or implied warranty, The "BlueIOT"
series of products (hereinafter referred to as "equipment") provided by our company are
management aids, which cannot replace the safety management system, measures and
rescue programs of dangerous operations, nor can they replace the supervision system in
operation management and measures.
During the use of this product, please remind the operator not to reduce safety aware-
ness due to the use of auxiliary tools, timely charge the device when the device is low,
and regularly check the device. If you have any questions, please contact our company for
repair or replacement.
11. Responsibility Statement
The product is an auxiliary tool, which cannot replace any safety management system,
measure and rescue solution for hazardous operation or supervision system and
measure for operation management. Please do not reduce safety awareness while
using the product, and timely charge the product and check its operation state when
the power is low.
Measurement data and results of this product are for reference only. Products
described in the Manual (including hardware and software) are all provided in the
"current situation" within the maximum range allowed by laws, and there may exist
defects, errors or faults. The Company does not provide express or implied guarantee
in any form, or compensate for any special, incidental, accidental or indirect damages
caused by using the Manual or products of the Company.
The Company does not undertake any responsibility for any damage to personal or
property interests of one's own or third party caused by failing to use the product
according to the Manual and warning statement.
The Company does not undertake any responsibility for any product operation
abnormality, information disclosure or other problems caused by network attack,
hacker virus infection or other unknown risks due to Internet access during product
use.
The product promoting pictures and advertisements are used only for instruction and
promotion. Physical products prevail in all cases.
The data in the Manual are all theoretical values obtained by the internal lab of
BlueIOT in specific testing environments. However, there may exist differences due to
individual product differences, software version, using conditions and different
environmental factors, and actual using conditions shall prevail in all cases.
The Company will not send special notice in the case of being necessary to modify
and adjust the above.
For more information, please contact [email protected].
BlueIOT Anchor User Manual |1312 |BlueIOT Anchor User Manual

BA3000-t BlueIOT Anchor
12. Appendix - Basic Specifications
Frequency
Locating Accuracy
Interface Type
Interface Speed
Interface Protocol
Interface Connect Distance
Transmission medium
Dimensions
Weight
Power Supply Interface
Voltage / Current
Working temperature
Storage temperature
Working humidity
Storage humidity
2.4GHz - 2.485GHz
Up to 0.1 m
Ethernet RJ45
10/100Mbps
UDP/TCP
Maximum 100m
CAT5+
220mm×220mm×32mm
620g
IEEE 802.3af POE
48V / 0.5A
-20°C - 70°C
-40°C - 85°C
10% - 90% non condensing
5% - 95% non condensing
14 |BlueIOT Anchor User Manual

，．宜
`a _
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement， the device can be used in portable exposure
condition without restriction