BlueParrott B450-XT User manual

How do I pair my BlueParrott B450-XT with my smartphone?
BlueParrott B450-XT BPB-45020
There are 3 ways to pair your BlueParrott B450-XT with your smartphone.
Select your preferred set of instructions to pair your headset with your
smartphone.
1. Pair using NFC (one-touch)
1. Ensure your headset is on, and that NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone against the NFC zone of your
headset until your smartphone registers the headset.
3. Follow the prompts on your smartphone to complete the pairing.
Enter “0000” (four zeros) if you are asked for a pin code.
2. Pair using the buttons
1. Ensure your headset is off.
2. Press and hold (6 seconds) the Multifunction button until you hear
“Power on”. Continue to hold the button until the LED flashes
alternating blue and red and you hear “Pair mode”.
The headset is now in pairing mode.
3. Go to the Bluetooth menu on your smartphone and select the
BlueParrott B450-XT from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code.
11/05/2021 12:33
https://www.blueparrott.com/supportpages/blueparrott-b450-xt-
bpb45020/204270/faq/3107ced1-0871-4e9c-a8e3-64790bcc9988
Page 1 of 2

3. Pair using voice commands
1. Ensure your headset is on.
2. Press the BlueParrott Button™ or press and hold the Volume Up
button.
3. After the voice prompt, say "pair mode". The headset is now in pairing
mode.
4. Go to the Bluetooth menu on your smartphone and select the
BlueParrott B450-XT from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code.
11/05/2021 12:33
https://www.blueparrott.com/supportpages/blueparrott-b450-xt-
bpb45020/204270/faq/3107ced1-0871-4e9c-a8e3-64790bcc9988
Page 2 of 2