BlueShadow Cuka-M1200C User manual

AC1200 Dual Band Whole Home
Mesh WiFi System
Version 1.0.0
Cuka-M1200C
QUICK INSTALLATION
GUIDE

Package Contents
Cuka-M1200C X1 Ethernet Cable X 1
Power Adapter X 1 Quick Installation Guide X 1
Power Port
WAN/LAN Port
LAN Port
Reset button
LED Indicator

Plug in the power and wired cable
（The optical modem must be connected to
the WAN/LAN port）
Quickly click the top cover for
twice
to turn on the LED indicator
1. Select one of them as main mesh randomly, the remaining two are child mesh,
(A1, A2, A3, is just show how to use each mesh, not stipulatetd on the mesh)
How to set up mesh tutorials
2. Search Cuka-M1200C 2.4G/5.0G
from mobile phone
3. Choose 2.4G or 5.0G to connet
3. Input SSID password : 22109088
WAN/LAN
WiFi key : 2219088

4. Open the browser, input URL to connect from mobile phone
Input URL
192.168.2.1/
blueshadowmesh.com
Enter Account Password
Account : admin
Password : admin
admin
admin
Submit5. Network enters the setup installation wizard
Click Network1 2 Next

5. Network enters the setup installation wizard
3Next 4Next
5Next 6Next
DHCP Client
DHCP Client is modem comes with its own
account and password no need to enter the
account password agin
PPPoE
PPTP
L2TP
PPPoE needs to enter the account and password

9Next 10 Next
5. Network enters the setup installation wizard
7Next 8Next

2. How to pair the other two child mesh
5. Network enters the setup installation wizard
11 Next
12
Wait to finish
Main Mesh(A1) Child Mesh(A2) Child Mesh(A3)

How to setup access form WiFi router
1 How to pair the other two child mesh
1. Input SSID password : 22109088
Main Mesh(A1) Main Mesh(A2) Main Mesh(A1) Child Mesh(A3)
Long press 5S main mesh(A1）Child mesh(A2) at the same time If the two turn blue, the
match is successful
Wait 2-5 minutes, if the light does not turn blue, try a second time
WAN/LAN
Q : What should I do when the main mesh keep solid red state ?
A: Change the IP address ,make the penultimate digit greather than 3
Such as : 192.168.4.1 / 192.168.5.1 / 192.168.6.1

LED Indicator Explanation
The system is starting.
The primary node is connected to the internet.
The secondary node is connected to the WiFi network of
the primary node well.
Solid blue
Status Explanation
Solid red
The primary node is not connected to the internet.
The secondary node is not connected to the WiFi network of
the primary node.
The secondary node is connected to the WiFi network of the
primary node very poorly.
Pairing Status
Red light flashes
Network status
Blue light breathing
Disconnection status
Red light is on
After turning off the breathing light
Indicator not light up when pairing,
network or disconnection status.
1234

Copyright & Trademarkes
blueshadow is a registered trademark of BLUESHADOW TECHNOLOGY CO., LTD
Other brands and product names mentioned herein are trademarks or registered
trademarks of their respective holders.
As the technology is constantly updated and improved, contents in this document
are subject to change without notice.
9908 Block B,ChinTo Building,1079 Minzhi Blvd,
LongHua,Shenzhen,Guangdong,China(518109)