Blueshark Studio Colossus User manual

Blueshark Studio
Colossus
Assembly Instructions 2021
Page 1 of 5
Index
COLOSSUS Assembly manual ........................................................................................................ 2
Central Module Assembly ............................................................................................................. 3
Display Drawer Assembly .............................................................................................................. 3
Drawer nk Assembly ..................................................................................................................... 4

Blueshark Studio
Colossus
Assembly Instructions 2021
Page 2 of 5
COLOSSUS Assembly manual
You will Need:
The Colossus Stora e Module is composed by many carefully
packa ed pre cut parts.
Use PVA lue on all wood to wood contact surfaces.
Some parts do not require Glue and can be intercha ed if needed.
Warnin : The wood can warp in transit and dimentions, you should
let it rest indoor about 24h before assembly.
To ensure that all parts fit every assembly step should be
assembled without lue, sometimes to ensure a perfect fit some
tabs or corners mi ht need to be filled.
After checkin that all parts fit to ether perfectly it can be
assembled permanently with lue.
Parts may chan e a little as product is allways bein up raded, any
doubts contact us.

Blueshark Studio
Colossus
Assembly Instructions 2021
Page 3 of 5
Central Module Assembly
Please note the order of the assembly and the orientation of the parts, in doubt please
cntact us at www.bluesharkstudio.com
On this step the entire box needs to be clamped while
the glue hardens.
Display Drawer Assembly

Blueshark Studio
Colossus
Assembly Instructions 2021
Page 4 of 5
Note: Do not use Glue on the Acrilic parts, only wooden parts
Ink Drawer Assembly

Blueshark Studio
Colossus
Assembly Instructions 2021
Page 5 of 5
Note: Do not use Glue on the Acrilic parts, only wooden parts