Blueview BV-SHT30 User manual

BV-HK4P-40A
01(5)
BV-SHT30
SMART BODY
SENSOR
- Adopt safety and environmental protection material;
- Mobile app control and check data;
- Real time report of light, temperature and humidity;
- Radar scanning induction;
- Bluetooth connection;
Application: suitable for indoor and stairs human body induction control, etc.
FUNCTION APPLICATION
Fixed by screw
INSTALLATION
1Years
PROFILE DRAWING
95.0mm
95.0mm 35.9mm
Ø6.0mm
Note: detailed info, please consult sales rep

BV-HK4P-40A
02(5)
CONNECTION DIAGRAM
Null-earth wire
Indicator
Reset button
Live wire
NETWORK ACCESS SETTINGS
Scan to download APP,create new account
1

BV-HK4P-40A
03(5)
Create project
2
Add device
3

BV-HK4P-40A
04(5)
5
Device regional management
Function introduce
4
Illuminance, temperature and humidity
detection; sensitivity and time setting
Checking device information and
removing devices

BV-HK4P-40A
05(5)
BLUEVIEW ELEC-OPTIC TECH CO.,LTD
□ Tel: [phone]
□ Fax: [phone]
□ Web.: www.blueviewled.com
□ Email: [e-mail]
□ Add.: No. 1000, Section 2, Konggang 2nd Road, Shuangliu, Chengdu 610207, Sichuan, CHINA
MOUNTING PRECAUTIONS
WARRANTY ORDINANCE
STATEMENTS AND RECYCLING
■Before installing the product, please cut off the power supply to prevent electric shock; This product is limited to indoor use. Pay attention to waterproof protection.
■Please use it within the specified voltage range to avoid burning out the power supply.
■The product shall not be used in places with high temperature, high humidity and high corrosion, so as not to affect the service life of the product; The product should not be
■installed in a metal shielded place to avoid affecting the Bluetooth signal.
■If the mobile app cannot be connected to the power supply during the initial use of the client, please press and hold the reset button on the power supply; Press and hold the
■reset button on the power supply for 5 seconds to restore the factory setting.installed in a metal shielded place to avoid affecting the Bluetooth signal.
■If the mobile app cannot be connected to the power supply during the initial use of the client, please press and hold the reset button on the power supply; Press and hold the
■reset button on the power supply for 5 seconds to restore the factory setting.
In case of product performance failure caused by non-human damage during the warranty period, you can ask for the following normal after-sales services:
One of the following situations (including but not limited to) is not within the scope of normal after-sales services:
Statement
Recycling
■Within 7 days of purchase, if there is a product quality problem, consumers can choose to install the invoice price for one-time return or exchange or replace the
■product with the same model and specification
■If you apply for 7 days no reason to return the product, please use it carefully to ensure that the product itself, attached accessories, product appearance and
■packaging are not scratched or damaged.
■Within 15 days of purchase, if product quality problems occur, consumers can choose to replace products with the same model and specifications
■During the free warranty period, after the product is returned, the product will be subject to quality inspection. After the fault is confirmed, the product can be
■repaired, refurbished or replaced; for the product that is tested correctly, it will be returned as it is.
■No "Three Guarantees" voucher or missing valid invoices or exceeding the "Three Guarantees" service period.
■Losses caused by force majeure such as fire, flood, earthquake, etc.
■The product is damaged by external factors or man-made actions, such as mechanical damage caused by water ingress, severe oxygen deficiency or rusting of the
■product, etc.
■Product failure caused by self-disassembly and destruction.
■Product failure or loss caused by installation and use not in accordance with the requirements of the product manual.
■The product model or actual product on the warranty certificate does not match, or has been altered.
■The product cannot be used normally due to the consumer's own mobile phone model or version.
■The damage caused by the transportation, loading and unloading on the way back to the factory for maintenance.
■Other non-product's own design, technology, manufacturing, quality and other problems caused failure or damage.
■If the external wire of this product is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid danger.
■The technical parameters given in this manual are all typical values and are for reference only. The specific parameters are subject to the actual measurement report.
■All product illustrations in this manual are schematic diagrams, and the specifics are subject to the actual goods received.
■This product is subject to change without notice
■LED lighting products belongs to electronic products, please do recycling treatment according to the relevant WEEE directives.