Blus PE3B User manual
PE3B User Guide
Contact for sales in Europe & North America:
http://www.minipci.biz
Page1
1.0 Introduction
The PE3B passive adapter allows you to use your existing PCI express
mini-card in the Express card standard slot. All kinds of mini card that base on
PCIE or USB bus interface are all support.
2.0 Specification
Express Card Standard Express Card Standard Release 1.0 (PCMCIA)
PCI Express base Specification 1.0
PCI Express Mini Card Electromechanical Specification Revision 1.2
Universal Serial Bus Specification Revision 2.0
SIM Connector for CDMA HSDPA/HSUPA, UMTS, GSM, GPRS, EDGE
mini card
Access LED; Power LED
USB2.0 and PCI-E mini card support
PTC fuses for power protection.
3.0 Installation Guide
1. If your need use SIM card, please insert SIM card into SIM slot firstly
2. Plug mini card device into mini PCIE connector with an angle about
30°, and fix mini card with screw.
Page2
3. Fixed the mini card with screw.
4. Insert PE3B into Express card slot
5. SW1 set description
SW1 function
1——2 Wireless enable
2——3 Wireless disable
a. wireless enable(default), set SW1 at 1-2
Page3
b. wireless Disable, set SW1 at 2-3
Page4
6. SW2 set description
SW2 Function
1 PERST# delay disable(default)
2 PERST#settoGND
3 PERST# delay enable for 6.9sec
a. For USB interface mini card, there wouldn’t work normal for some
brand card, if you find the software show “ fly mode”, please set SW2 at
2, and try again.
Page5
b. For some laptop, the computer couldn’t boot up when express card is
inserted. If that, please set SW2 at 3, then the computer could boot up
normal.
Page6
7. LED description
PowerLED,indicatePowerisOK.
Page7
Yellow LED: Access LED, the LED will blink when wireless card work well.
Red LED: PERST# indicate LED, when SW2 at 2, that will light all the time.
While SW2 set at 3, the LED will light about 6.9sec.
4.0 Caution
zAll products specifications are subject to change without notice.
zBplus Technology reserves the right to modify the products in its line during
the course of the year.
5.0 Maintenance
There is no guarantee for incorrect operation.
Please contact the distributer for more details.
Table of contents
