boAt ENERGYSHROOM PB09 User manual

ENERGYSHROOM PB09
Thank you for choosing Energyshroom PB09 power bank by boAt to power up your cherished
devices. It is a high capacity, 10000 mAh portable charging device that utilizes Li-polymer battery
and is built for a safe, fast and efficient user experience. It charges your beloved devices such as cell
phones, tablets, MP3 players, digital cameras, etc. It has USB as well as Type-C as its input interface
that meets all the digital device requirements. For outstanding usage and performance, the product
has built-in USB charging controller that is compatible with most of the smartphones, tablets and
devices.
Contents
•1x Energyshroom PB09
•1x USB cable
•1x Manual
Product Image:
Features
•Standard USB and Type-C as its input interface that meets all the digital device
requirements.
•Built-in short circuit protection.
•Intelligent input/output control and LED indicators.
•Compatible built-in USB charging controller.
•Supports fast charging.
•Supports micro USB as well as Type-C charging
Button Functions
•To see the charging status of the power bank and turn on the LED indicator, kindly single
press the power button.
•To switch the power bank off, please double press the power button.
Charging Energyshroom PB09
•Please connect the micro USB/Type-C connector to the micro USB port of the power bank.
•Then, connect the USB/Type-C connector to the adaptor or laptop/computer USB port.
•Note: Computer USB port output is less than that of the wall adapter.
Charging Your Device
•Please connect the device to the power bank by using the USB/Type-C connector.
•In case the power bank doesn’t start automatically, single press the power button to
begin charging.

LED Battery Indicator
1 LED in solid light
0-25%
2 LEDs in solid light
25-50%
3 LEDs in solid light
50-75%
All LEDs in solid light
75-100%
Product Specification
Capacity
10000mAh (37Wh)
Rated Capacity
6500mAh 5.0V (TYP 1A)
Dimension
148.5*70*15.7mm
Weight
270gms
Battery Type
Lithium-polymer
Main IC
IP5328
Protection IC
XB7608
Input
5V/3A, 9V/2A
Input Ports
1xMicro USB, 2xType C
Output Ports
1xMicro USB, 2xType C
Output 1 + Output 2
5V ± 5% / 3A,9V ± 5%/2A,12V ± 5%/1.5A
Fully Charged by 2.1A adaptor
11hrs
Fully Discharged by 3.0A load
4hrs
Fast Charge
Every port supports Fast Charge with QC2.0/QC3.0
Output and PD bi-directional input/output protocol.
Operating Environment
-10 to 55deg Celsius
Over Current Protection
Protected (3.6±0.10)A
Over Charging Voltage Protection
10±0.05 V
Short Circuit Protection
Protected
Body Temperature Cut Off
Yes (55-60deg Celsius)
Important User Instructions
•Please utilize our standard USB charging cable to charge the device.

•It is recommended to charge the power bank fully before its first use.
•Do not leave the power bank inside the car lying unattended.
•The product should be safeguarded against any physical shock or vibration.
•Keep out of reach of children.
•If the power bank gets discharged completely, make sure to quickly put it into charge.
• Do not leave battery in charging for over 24 hours .
• Charging current and voltage should not exceed the maximum specified amount.
Warning
•Do not drop, decompose, impact the device or repair it on your own.
•Do not put this product in water, exposed to fire or direct sunlight.
•Do not use the product around combustible gas. It may catch fire and/or cause burns.
•Do not disassemble or attempt to replace the Li-polymer battery under any circumstance, as
it may damage the device permanently.
E- Waste Management
As per government rules, all E- wastes are to be managed by effective treatment under specialized
methodologies prescribed by the Govt. of India.
Do not dispose the product as unsorted municipal waste. The waste will be treated as per the norms
set by the pollution control board. Please contact customer care for getting guidance on proper
disposal of this product.