Bob's Discount Furniture T/F Panel Bunk Bed User manual

Date: 11-15-2016
Page 1 of 6
T/F Panel Bunk Bed
QTYCODE HARDWARE
16
3
56
1
4
4
16
16
1
2
3
4
5
6
7
8
9.5 x 25mm Allen Bolts
6.3 x 50mm Allen Bolts
4 x 30 Wood Screws
M4 Allen Wrench
8.5 x 90mm Metal Dowel Pins
6.3 x 35mm Allen Bolts
Spring Washers
Flat Washers
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components
are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required
.
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starng the assembly process.
• Do not ghten all bolts and screws completely unl the enre unit has been assembled and set up.
• Be careful if using power tools as they can over ghten screws and strip threads.
WARNING
QTYCODE COMPONENTSCOMPONENTS
1I
CODE
JSupport LegsLower Slat Secon
1K Upper Slat Secon
QTY
3
L Ladder1
1GH Rear Top Bed RailFront Top Bed Rail 1
1EF Right Top Side PanelLe Top Side Panel 1
1C D Rear Lower Side RailFront Lower Bed Rail 1
1AB Right Lower Side PanelLe Lower Side Panel 1
A
B
C
D
J
J
K
L
G
H
I
E
F

Date: 10-21-2016
Page 2 of 6
1
T/F Panel Bunk Bed
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
B
STEP 1 - Figure 1
Begin assembly by aaching each Lower Bed Rail (C & D) to the inside of each Le and Right
Lower Side Panel (A & B) by using 2 Allen Bolts (1), 2 Spring Washers (7) and 2 Flat Washers (8)
per post.
FIGURE 1
A
A
C
D
8
8
7
7
1

Date: 10-21-2016
Page 3 of 6
2
2
2
T/F Panel Bunk Bed
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
STEP 2 - Figure 2
Aach each Front Top Bed Rail (G) and Rear Top Bed Rail (H) to the inside of each Le and Right Top Side
Panel (E & F) by using 2 Allen Bolts (1), 2 Spring Washers (7) and 2 Flat Washers (8). Secure from the
outside of each post at the top with 1 Allen Bolt (2) per side. Tighten all bolts from Steps 1 and 2 using
Allen Wrench (4) provided.
FIGURE 2
1
8
8
7
7
1
H
G
E
E
F

5
5
5
5
Date: 10-21-2016
Page 4 of 6
T/F Panel Bunk Bed
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
B
A
E
F
STEP 3 - Figure 3
Once in place, aach the Top Le Side Panel (E) to the top of the Le Lower Side Panel (A), and the Right Top
Side Panel (F) to the top of the Right Lower Side Panel (B) by inserng 1 Metal Dowel Pin (5) in the holes and
carefully guide each panel in place.

33333333333333
STEP 4 - Figure 4
Assemble the Upper Seat Secon (K) to the
inside of each Front & Rear Top Bed Rail (G &
H) by seng in place and securing with 14
Wood Screws (3) on each end of slats.
Tighten all screws with Phillips head
screwdriver (not included).
STEP 5 - Figure 5
Also assemble the Lower Slat Secon (I) to
the inside of each Front & Rear Lower Bed
(C & D) by seng in place and securing
with 14 Wood Screws (3) on each end of
slats. Tighten all screws with Phillips head
screwdriver (not included).
Date: 10-21-2016
Page 5 of 6
FIGURE 4
FIGURE 5
T/F Panel Bunk Bed
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
K
I
C
D
H
G
33333333333333
33333333333333
33333333333333

6
6
STEP 6 - Figure 6
Aach Support Legs (J) underneath Lower
Slat Secon (I).
STEP 7 - Figure 7
Aach Ladder (L) to front of the Front Top Bed
Rail (G) and Front Lower Bed Rail (C) using 2 Allen
Bolts (6) from the inside of each rail. Tighten all
bolts with Allen Wrench (4) provided. The
assembly is now complete.
Date: 10-21-2016
Page 6 of 6
FIGURE 6
FIGURE 7
T/F Panel Bunk Bed
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
L
L
I
I
C
G
G
J