Frontgate 160879 NAT User manual

Assembly Instructions
Cover
Parts Picture Description QTY Parts Picture Description QTY
A
B
C
Table leg
Frame
Washer
Screw
M8*80mm
Hex Key M6
D
E
F
4x
1x
8x
8x
1x
1x
PART LIST & HARDWARE:
160879 NAT Transitional Teak Dining Table ‐ Natural

PRE ASSEMBLY INSTRUCTION:
Don't throw away packaging materials until the assembly is complete. Part might be accidentally thrown away.
ASSEMBLY STEPS:
A
B
C
D
E
F
Step 2.
Put cover F into umbrella hole.
Step 1.
Fix leg A onto the table frame B with washer C and screw D using Hex key E.

Care & Maintenance:
Teak does not require any special maintenance other than an occasional cleaning.
If left to age naturally outdoors, the surface of wood will gradually change to a soft silver –grey as the pigments
fade. We recommend that you maintain the silver patina with regular, gentle cleaning with soft-soap flakes
dissolved in warm water (not detergent). Be sure to use a non-abrasive brush or sponge, and avoid using steel
wool or wire brushes. When finished, rinse the entire piece of furniture with low-pressure water to remove any
dirt or remaining solution and then dry completely.
Frontgate offers a full range of professional solutions to help maintain the beauty of your teak. For Information
about teak cleaning products, please visit our website at frontgate.com or call our product specialists at 1-800-
537-8484
Frontgate: Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484
or email:[email protected]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m .EST or Saturdays 9:30
a.m. to 6:00 p.m.
FULLY ASSEMBLED ITEM