BobsCNC KL733 User manual
Page 1
K L7 3 3
Version 1.6
Page 2
…………………………………………………………………….3
………………………………………………………………………………….4
……………………………………………………………………..5-6
…………………………………………………………………………...7
………………………………………………………………...8
…………………………………………………………….9
-……………………………………………………………………..10
…………………………………………………………………..11
1……………………………………………………………...12-15
2 ……………………………………………………………16-18
Page 3
’
Hint
Page 4
The KL7 Series does not include a Spoilboard. You will need to build one.
We recommend you consider the following quesons to help determine
the best Spoilboard conguraon for your needs. We also have includ-
ed some ideas that may be helpful.
• With large projects, you may want to only have clamping at the edges.
• With small projects, you may need exibility with clamping.
• With tall projects, you may want a thinner Spoilboard
• A thinner Spoilboard will have more ex
• We would recommend a 0.5” to 1.0” thick baseboard and Spoilboard.
• Double sided tape
• Threaded inserts
• T-slots
• Vacuum table
Recommended Spoilboard installaon will require:
1. 16 5/16-18 x 1.5” screws and nuts
2. 4 Runner boards 3/4 x 1 x 3 pine boards 40” long
3. 1 Baseboard 1/2 to 1” plywood (36.5” x 49.5”)
4. 1 Spoilboard material nish size (36.5” x 49.5”)
Other needed material may include: Inserts, T-track, or glue depending
on your requirements for material clamping.
Page 5
Hint
1/16”
5/16”
Page 6
5/16”-18 3/4”
Page 7
Page 8
-
Page 9
Spoilboard (Opon 2) - Using Inserts
Page 10
--
Spoilboard (Opon 3) - T-slots (A)
-
3.09”
Page 11
Correct
Incorrect
ROUTER
-
Page 12
Method 1 –Using a Square
Page 13
Page 14
Page 15
Page 16
Method 2 –Using a Tram Tool
Page 17
0.002”.
Page 18
Other manuals for KL733
3
Table of contents
Other BobsCNC Printer manuals
