Body Go Fitness Deluxe Motorised Treadmill 3.0HP User manual

INSTRUCTIONMANUAL
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING AND SAVE IT FOR FUTURE REFERENCE.
ALL PRODUCTDRAWINGIS USED FOR REFERENCEONLY, THE FINALLY CORRECT DETAILSPLEASE SEE REAL
PRODUCTS.

2
Content
Safety Precautions
Assembly Steps
Folding Steps
Operation Instruction
Tips for Stretching
Maintenance
Explosive drawing
Part list

3
SafetyPrecautions
Thank you for purchasing thistreadmill, it has been designedand manufactured to give you many years of trouble free service. You may
already befamiliarwithusingasimilar product butpleasetakethe time to readtheseinstructions whichhave been written toensure that
you get the very best from your purchase.
Warnings
1. To reduce the risk of seriousinjury, read the following importantwarnings beforeusing the treadmill.
2. Before starting anyexerciseprogram youshould consult your doctor to determineif youhave any physicalor health conditionsthat
could createa risk toyourhealthand safety,or prevent youfromusingthe treadmillproperly.Your doctorsadviceis essential ifyou
are taking medication that affects your heart rate,blood pressure or cholesterol level.
3. Be awareof your bodyssignals. Incorrectorexcessiveexercise can damageyourhealth.Stop exercising ifyou experienceany of
the followingsymptoms: Pain, tightness inyourchest,irregularheartbeat,extremeshortness of breath,feelinglight-headed, dizzy
or nauseous. If you do experience any of these conditionsyoushould consult your doctor before continuing with your exercise
program.
ElectricalSafetyPrecautions
Failure to observe the following warnings may increase the risk of an electric shock and personal injury.
1. Always check the power cable for damage priorto use. If any damage is observed, do NOT use the power cable.
2. Never touch the power cable with wet hands.
3. Position the power cable so thatit cannot be walked on or pinched.
4. Only the supplied power cable should be used with the treadmill.
General SafetyPrecautions
1. Use the treadmill only in theway described in this instruction book.
2. Ensure that the voltage of the electrical supply is the same as that indicated on the power cable.
3. It is the responsibility of theowner to ensure that all users of the treadmill are adequatelyinformed of all warnings and safety
precautions.
4. The treadmill isheavy and should be removed from the packaging and assembled by two people.
5. Before assembling the treadmill, make sure that it is not plugged into any electrical source, such as a wall socket.
6. Use the treadmill onasolid, flatlevel surface withaprotectivecover foryour floor orcarpet.Position thetreadmillwith at least 2
meters * 1 meter of free space behind the treadmill.
7. Keep the treadmill away from excessive moisture and dust.
8. Before using the treadmill, check the nuts and bolts are securely tightened.
9. The safety level of the treadmill can be maintained only ifit is examined regularly for damage and wear.Replace defective
components immediately. Do not use the treadmill until they have been replaced.
10. The treadmill has been tested and certified to EN957 under class H.C. Suitable for domestic, home use only.
11. Braking is controlled by the belt rotation power supply.
12. The treadmill isnot suitable for therapeutic use.
13. Keep children and pets away from the treadmill.The treadmill is designed for adult use only.
14. Wear suitableclothing whilst using the treadmill. Avoid wearingloose clothing which may get caught in the treadmill or clothingthat
may restrict or prevent movement.
15. Do not arch yourback whenusing the treadmill; always try to keep your back straight.

4
16. If you feel pain or dizziness while exercising, stop immediately and cool down.
17. The pulse sensor is not amedical device. Several things including user movement, may affect the accuracy of the sensor.The
sensor is intended only as an exercise aid in determining general heart rate trends.
18. Care must be taken when liftingor moving the treadmill soasnot to injure yourback. Alwaysuse proper liftingtechniquesand/or
use assistance.
19. Asafe key is supplied for personal safety.Use the safe key when operating the treadmill for the emergency dismount function. In
the event of an emergency,place both hands on the handlebars and put your feet onto the non-slip surface of the main frame. As
you do this, the safe key will disengage from the computer and the emergency dismount function will be triggered.
20. All moveableaccessoriesrequireweeklymaintenance. Check them beforeuseeverytime.If anything isbrokenor loose, please fix
it immediately.You may continue using the treadmill after any damaged parts have been fixed.
21. The treadmill is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given adequate supervision or instruction.
22. Supervised children using the treadmill must notbe allowedto play with the treadmill.
23. This machine must be wellearthed. It can decrease the danger of electric shock.

5
AssemblySteps
Please check the package listcarefully before assembly.
Packagelist:
NO.
Description Specification QTY
NO.
Description Specification QTY
A
Mainframe 1 C06
Right foamhandlebar 1
B Monitor 1 D07
Safetykeymodule 1
C iPad holder (optional) 1 C14
Left bottom cover 1
B01
Bottleholder 1 C15
Right bottomcover 1
B08
Cross solidwrench 1 E13
Bolt M8*15 10
B09
5# Allen wrench 5mm 1 E22
Bolt M5*12 6
B15
Solidwrench 19mm 1 E32
Lock washer8 10
C05
Left foamhandlebar 1 E39
Bigflat washer Φ5*φ13*1.0 4
Assemblytools:
5# Inner hex wrench 5mm 1pc
Cross solid wrench S=13 14 15 1pc
Solid wrench 19mm 1pc
Attention: please don`t switch on before finish assembling.

6
Step1:
Step2:
Open thepackage
andput themainframe
A
onthe
floor.
Attention:Don topenthepacking belt(P)before
set up of the treadmill.
1.
Lift up
column A06
,A07
first;
2. Fix the column A06 to the mainframe Awith bolt
E13 andlockwasherE32by5# Allen wrench
B09 .
3. Fix the columnA07 to the mainframe according
to the steps above.
Attention:
ATTENTION:Supportthe column with hand to
avoid falling down.

7
Step3:
Step4:
1.
Connect the monitor cable D03 with D04.
2. Fix the monitorBtothe left andright column
A06\A07 with bolt E13 and lockwasher E32
by 5# Allen wrench B09.
Attention: Pleasemake surecables are well
connected before fasten.
Please screw the ipad holder Cinto the monitor
B
by solid wrench B15.
Attention:Firstscrewthe shaft B12of the ipad
holder intothemonitor Bbyhand and then
fasten the stop nut B13 by solid wrench B15.
The ipadholderisan optional part,youdon t
need toassembleit ifnotfindit inthe
package.

8
Step5:
Step6
Fix the left and right foam hand
lebar C05
\
C06 to
the monitor Bwith bolt E22 andbig washerE39
by cross solid wrench B08
Fix the leftand right bottomcover C14
\
C15
to the
mainframe.
Attention: the structure of leftand right bottom
cover is buckle design. Please make sure all
the buckles aresecurely fastened.

9
Step7
Step8
How touse safetykey
Fix the bottle holder B01 to theright columnA07
with bolt E22 by solid cross solid wrench B08.
1. Cut off belt P;
2. Insert the safety key D07 intothe monitor B.
1. Before running, please nip thesafety key clip D07 with yourcloth.
2. For any emergency, please pull the safety key rope , and the machine will stop.

10
Step9
Step10
Take apart the bolt M8*15 (E13) in the bottom side
of the steel cable (E) with 5#Allen wrench B09.
Take apart the bolt M8*15 (E13) in the top sideof
the steel cable (E) with 5# Allen wrench B09. Then
take away the steel cable from the bottom frame.
Notice: The steel cable will ensure your safety
during assembly; you can keep it for next use.

11
Folding steps
Folding up
Attention: it is forbidden to fold up when the machine is in running or incline mode.
Folding down
Hold the running deck which showed in “F”position
and then fold it up with the arrow direction until you
hear a “bang”voice from the air cylinder.
Support placeFwithhand,kick the placeEofair
pressure bar, then the base frame will fall down
automatically.

12
Transport tips
To tilt,start byplacing one hand atposition “F”to
support the top endof the treadmill.Next,placeone
foot at position “D”to holdthe bottom endof the
treadmill steady.Withyour foot at “D”,slowlytiltthe
top of the treadmill downwardtowardsthe ground.
OncetheMainFrame “F”reachesalowenough
point, the wheelsof the treadmill will become active.
To transport, holdthe treadmill fromposition “F”
and tiltuntil thewheelsare ableto moveon the
ground.

Operation introduction
NO.
Icon
1
Pad/mobile phone holder
2
TFT color screen
3
Inclination/calorie
window
Generally it shows runners calories worked out.it will count from 0 to 999, when up to 999, itwill
count again from0; whencount down, it will count from thesetting data to0, whendownto 0, the
machine will stop smoothlyand enter into the st
When set inclination,it shows your currentinclinationfrom0
enter into calorie window after 30s.
4 Time window : Display
5 Distance window : D
isplay the running distance
6
Speed/Pulse window:
usuallyit shows your current speed from 0.8
for several seconds it shows your current pulse from 50
used as the medical purpose).
7
INCLINE 6、8、
10: Shortcutkey for inclination
8
Inclination adjustment key:
adjust the incline when the machine is working.
seconds, the incline with be upor down continually.
Function description
Pad/mobile phone holder
window
Generally it shows runners calories worked out.it will count from 0 to 999, when up to 999, itwill
count again from0; whencount down, it will count from thesetting data to0, whendownto 0, the
machine will stop smoothlyand enter into the st
andby mode.
When set inclination,it shows your currentinclinationfrom0
-
15%,if there is not anyoperation, it will
enter into calorie window after 30s.
running time
isplay the running distance
usuallyit shows your current speed from 0.8
-
20.0km/h; if you hold the pulse sensor
for several seconds it shows your current pulse from 50
-
200/min. (the date just for reference, cannot be
used as the medical purpose).
10: Shortcutkey for inclination
Inclination adjustment key:
Press this button to set the valueunder setting mode. Press thisbutton to
adjust the incline when the machine is working.
1section at each press, when press the buttonover 0.5
seconds, the incline with be upor down continually.
13
Generally it shows runners calories worked out.it will count from 0 to 999, when up to 999, itwill
count again from0; whencount down, it will count from thesetting data to0, whendownto 0, the
15%,if there is not anyoperation, it will
20.0km/h; if you hold the pulse sensor
200/min. (the date just for reference, cannot be
Press this button to set the valueunder setting mode. Press thisbutton to
1section at each press, when press the buttonover 0.5

14
1. Quick start
1) Switch on and putthe safety key in correct position.
2) Press the “START”key and then the machine will work at a speed of 0.8km/h after the beepercountdown from 3to 1.
3) According to your need you canchange the speed and incline by pressing“-SPEED+”and “-INCLINE+”separately.
9
Press the MODE key continuously to choose“15:00”、“1.00”、“50.0”、“contest mode”、and “0:00”five
mode (15:00 is time countdown mode, 1.00 is distance countdown mode, 50.0 iscalorie countdown mode,
0:00 is manual mode).
1
0
Play/pause key :to
stop or restart the music or video.
11
You can press this button to make choice around 3 entertainments
in sequence
:
standby mode, audio
mode and video mode . When playing video, press this buttonwill make the video full screen.
12
When getting through thepower and safety key attached, press this button at any time tostart the
machine.
13
Safety key.
14 Stop key
15
Mp3 interface : You can connect external MP3 and mobile phone with MP3 wire to play music.
16
Press it for several secondsto turn down the volume in both music and video mode. Press itshortly and it
will enter into theprevious music or video.
17
Press it for several secondsto turn up the volume in both musicand video mode. Press it shortly and it
will enter into thenext music or video.
18
Press the PROG key and the machine will show P1-P2………P24 U1…U3 HP1 HP2 FAT in
sequence(P1-P24 are preset programs;U1-U3are user-definedprograms;HP1-HP2 is heart rate control
program, it is anoptional function according to order request;FAT is body fat test function)
19
SPEED 6,8,10:Shortcut key for direct speed choice
20 Speed adjustment key. Under initial situation, set the data withthis button. When the machineis running,
press the button to adjust thespeed, 0.1 KM at each press,when press the button over 0.5seconds, the
speed will be up or down continuely

15
2. Homepageintroduction
There are four function modulesin the homepage. They are mode, program, music and video.
There are 3 kind of countdownmodes , contest mode and manual mode undermode function.
There are 24 preset programs, 3 manual programs, 2 HRC programs(optional)and 1 FATtest program under program function.
Icon description
Inclination
Hold the pulse sensor for several seconds it shows your current pulse from 50-200/min. (thedate just for
reference, cannotbe used as the medical purpose).
Time
Distance
Calorie
Speed
System will calculate the distance only if the userdoing exercise on the machine or it won`t
Blue tooth
Count/countdown timer
Distance/distance countdown calculator
Calorie/calorie countdown calculator

16
3. function description
Press the MODE key and enter into countdown mode. Pressthe MODE key continuouslyto choose “15:00”、“1.00”、“50.0”、
“contest mode”、and “0:00”five mode (15:00 is time countdown mode, 1.00 is distance countdown mode, 50.0 is calorie countdown
mode, 0:00is manual mode). Once you choose acertainmode and thenyou can adjustthedata by pressing-SPEED+or -INCLINE +
key. When finishsetting, press START key and then the machine will begin to move.
Display yourexercise time from0:00-18:00hour.Whenoverflow 18, itwillcountagain from0andthe machine
will go on working continuously;in countdown mode it will showdefault time 15:00 to 0:00, when down to 0:00,
the treadmill will stop working. System itself willgive you a scoreand then enter into standby mode.
Display range: 0.00-99.9 when overflow 99.9, it will count from 0.00 again.
In countdownmodeitwilldecrease fromdefaultdistance1.00to 0.Systemitselfwillgiveyou ascore andthen
enter into standby mode.
Display range: 0.-999 when overflow 999, it willcount from0 again.
In countdown mode it will decrease from default calorie 50.0 to 0. System itself will give youascore and then
enter into standby mode.
1) Manual mode
Press the “START”key and then the machine will work at aspeed of 0.8km/h and allotherwindows will countfrom 0. Press the “-
SPEED+”key to change the speed and the“-INCLINE+”key to change the incline.
2) Countdown mode
i. Time countdown mode
Press MODE key to enter into time countdown mode and the default time 15 will be flashed displaying on the screen.
Press the “-INCLINE+”or “-SPEED+”key to change the time from 5:00 to 99;00.
ii. Distance countdown mode
Press “MODE”key toenter into distance countdown mode andthe default distance “1.00”will be flashed displaying on the
screen. Press the“-INCLINE+”or “-SPEED+”key to change the distance from 0.5 to 99.9.
iii. Calorie countdown mode
Press “MODE”key to enter intocalorie countdown mode andthe default distance “50.0”will be flashed displaying on the
screen. Press the“-INCLINE+”or “-SPEED+”key to change the distance from 10.0 to 999.0.
After finish exercising the system will display your runningdata automatically.

3) Contest mode
P
ress MODE key continuously and enter into contest mode.
21.1km 42.19km
Press MODE key, select your favorite
contest distance and then
last press START key to begin exercise.
Icon description
C is short for computer
U is short for user
ress MODE key continuously and enter into contest mode.
There are 6distance modes. They are 3.0km
5.0km
contest distance and then
Press the “-INCLINE+”or “-
SPEED+”key to change the
Display the distance percentageof the computer
The default speed of the computer is 9km/h. you can adjust the
computer speed by changing contest time.
Display the distance percentageof the user
17
5.0km
10.0km 5.0km
SPEED+”key to change the
contest time. At
Display the distance percentageof the computer
The default speed of the computer is 9km/h. you can adjust the

18
Contest distance Default time
3km 18:00
5km 30:00
10km 01:00:00
15km 01:30:00
21.10km 02:06:35
42.19km 04:13:10
After finish exercising the system will judge your running performance automatically.
4) Preset program
Press PROGto enterinto program mode. Press “PROG”key to select Program1-24 U1-U2-U3 HP1-HP2 FAT in sequence. There
are 30 different kinds of presetprogram. FAT is fat test program.
Icon description
Program movement time: default time is 10 minutes. Press the“-INCLINE+”or “-SPEED+”keyto change the time
from 5 to 99.
Program column: each programis divided into 10 stages.

19
iv. Press PROG key, the screen shows“Program 1-24”column graph.
v. Select youfavoriteprogram.Meanwhile the defaultexercisetime is10:00.Press the “-INCLINE+”or “-SPEED+”key to
change the time.
vi. Press the START key to begin exercise. Pressthe “-INCLINE+”or “-SPEED+”key to change the inclination orspeed during
exercise at each stage.
vii. When finish the previous stage,the system will go on next stage and the speed and inclination will be changed according to
the system.
viii. After finish each program, the system will give you a score.
ix. Program introduction
Each program is divided into 10stages and each stage has its own speed and incline.
Time stage
program
Set time / 10 = time of each stage
1
2
3
4
5
6
7
8
9
10
P1
SPEED
2
4
3
4
3
5
4
2
5
3
INCLINE
1
2
3
3
1
2
2
3
2
2
P2
SPEED
2
5
4
6
4
6
4
2
4
2
INCLINE
1
2
3
3
2
2
3
4
2
2
P3
SPEED
2
5
4
5
4
5
4
2
3
2
INCLINE
1
2
2
3
1
2
2
2
2
1
P4
SPEED
3
6
7
5
8
5
9
6
4
3
INCLINE
2
2
3
3
2
2
4
6
2
2
P5
SPEED
3
6
7
5
8
6
7
6
4
3
INCLINE
1
2
4
3
2
2
4
5
2
1
P6
SPEED
2
8
6
4
5
9
7
5
4
3
INCLINE
2
2
6
2
3
4
2
2
2
1
P7
SPEED
2
6
7
4
4
7
4
2
4
2
INCLINE
4
5
6
6
9
9
10
12
6
3
P8
SPEED
2
4
6
8
7
8
6
2
3
2
INCLINE
3
5
4
4
3
4
4
3
3
2
P9
SPEED
2
4
5
5
6
5
6
3
3
2
INCLINE
3
5
3
4
2
3
4
2
3
2

20
P10
SPEED
2
3
5
3
3
5
3
6
3
3
INCLINE
4
4
3
6
7
8
8
6
3
3
P11
SPEED
2
5
8
10
6
9
5
3
2
2
INCLINE
1
3
5
8
10
7
6
3
2
3
P12
SPEED
2
5
5
4
4
6
4
2
3
4
INCLINE
3
5
6
7
12
9
11
11
6
3
P13
SPEED
2
7
4
7
8
9
4
5
3
2
INCLINE
5
6
6
4
6
5
8
9
4
2
P14
SPEED
2
6
5
4
8
6
5
2
3
3
INCLINE
5
6
5
8
4
5
5
10
6
3
P15
SPEED
2
6
5
4
8
7
5
3
3
2
INCLINE
3
4
5
6
3
5
5
6
4
3
P16
SPEED
2
5
7
5
8
6
5
2
4
2
INCLINE
1
5
6
8
12
9
10
9
5
3
P17
SPEED
2
5
6
7
8
9
10
5
3
4
INCLINE
3
5
6
8
6
5
8
7
5
3
P18
SPEED
2
3
5
6
8
6
9
6
5
2
INCLINE
5
7
5
8
6
5
9
10
6
2
P19
SPEED
3
7
6
5
9
7
6
3
5
2
INCLINE
3
5
6
8
5
6
5
12
8
3
P20
SPEED
3
7
9
10
11
12
10
8
5
2
INCLINE
2
5
6
7
6
5
8
6
3
2
P21
SPEED
3
6
8
7
9
10
5
8
3
2
INCLINE
3
6
8
9
9
6
8
10
6
3
P22
SPEED
3
5
8
6
9
10
8
12
6
3
INCLINE
2
6
8
10
12
10
12
8
5
2
P23
SPEED
3
5
9
11
12
8
6
5
3
2
INCLINE
2
6
8
10
9
7
8
10
6
3
P24
SPEED
3
8
10
11
12
10
10
8
5
3
INCLINE
3
6
8
9
10
12
9
6
3
2