BOERPLAY PSTE120.021 User manual

Multi-play equipment
PSTE120.021
Powered by TCPDF (www.tcpdf.org) 1 / 1

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 120 021
Palenwoud
Adventure Play
3-10-2023
Afmetingen Dimensions
A
0,00 m
0,39 m
0,71 m
1,03 m
1,45 m
2,60 m
3,05 m
3,30 m
3,96 m
4,05 m
< 0,35 m
0,00 m 0,66 m 1,85 m 2,08 m 4,64 m 4,97 m 5,94 m 6,32 m
0,00 m
0,89 m
1,47 m
1,83 m
3,34 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 120 021
A
Palenwoud
Adventure Play
3-10-2023
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
9,55 m
9,23 m
6,63 m
6,12 m
R1,75m
R1,75m
R1,75m
1,00m0,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 120 021
Palenwoud
Adventure Play
3-10-2023
Bodemplan Groundplan
A
Grondmarkering
Ground level marker
0,70 m
0,61 m
3,33 m 2,80 m 3,42 m
3,41 m 3,22 m
1,60m
0,52m
0,75m
0,25m
1,21m
0,98m
1,80m
1,53m
0,60m
0,40m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 120 021
Palenwoud
Adventure Play
3-10-2023
Modules Modules
A
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
- Plaats toren 1 met 1, ,(3x)3,( x)6,7 en (3x)8
3 - Plaats toren met ,(3x)3,( x)4,5, en (6x)8
4 - Plaats 11, verbind deze aan toren 1 en toren
5 - Plaats 9 en 1 , verbind deze aan toren 1
6 - Plaats 10 en ( x)13, verbind deze aan toren
7 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
8 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
- Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
Assembly sequence:
1 - Dig the holes according to the ground plan
- Place tower 1 with 1, ,(3x)3,( x)6,7 en (3x)8
3 - Place tower with met ,(3x)3,( x)4,5, en (6x)8
4 - Place 11, attach it to tower 1 and tower
5 - Place 9 and 1 , attach it to tower 1
6 - Place 10 and ( x)13, attach it to tower
7 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
8 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
- Check the dimensions of the safety area with regard to the play equipment
Tower 1
(Toren 1)
Tower 2
(Toren 2)
Typeplaatje
Identification plate
B

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 120 021
Palenwoud
Adventure Play
3-10-2023
Modules Modules
A
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
Driehoek dak
00300MAP11
Vloer 1,45
00201MAP22
Grond fra e 1,45
14002MAP63
Staander 3,3 33004
MAP
2
4
Staander 3,75
38004
MAP
1
5
Staander 4,0
40004MAP26
Staander 4,7
47004MAP17
Railing
15005MAP98
Toulader voor railing 1,45
14511MAP1
9
Driehoek opkli net 1,45
14524
MAP
110
Wiebelbrug 2,70 27028
MAP111
Module RobinaGlijbaan 145 - 150 c
B
192002PSTMOD
1
12
Adventure PlayHandtouw
B
232016PSTMOD213
7
6
1
4
5
43
10
8
63
1
11
8
8
8
8
8 8
9
13

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 120 021
Palenwoud
Adventure Play
3-10-2023
Modules Modules
A
0,00 m 0,70 m 1,09 m 1,41 m 1,73 m 2,15 m 3,30 m 3,75 m 4,75 m
< 0,85 m
> 0,60 m
0,03 m

LOGBOOK
Type indication Adventure Play
Article number PSTE120.021
Product Name Multi-play equipment
Maximum fall height 1,5 m
Construction year 2023
Certificate 062389
Inspection body TUV Nederland QA BV
Ekkersrijt 4401
5692 DL Son
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain