BOERPLAY VRBE060.964 User manual

VRBE060.964
Combination equipment

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE VRB 060 964 A
Vrijbuiter
RVS
30-10-2013
Afmetingen Dimensions
0,00 m
0,93 m
2,21 m
2,47 m
0,00m 1,01m 1,70m 4,36m 0,48m
0,00 m
1,54 m
1,01 m
1,70 m
4,36 m
<0,35m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE VRB 060 964 A
Vrijbuiter
RVS
30-10-2013
Obstakelvrije zone Obstacle free zone
Obstakelvrij WAS
Obstacle free WAS
Opvangzone
Impact area
Obstakelvrij EN-1176
Obstacle free EN-1176
7,92 m
8,46m
9,31m
8,27 m
R1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE VRB 060 964 A
Vrijbuiter
RVS
30-10-2013
Bodemplan Groundplan
0,60 m
0,60 m
0,78 m
0,75 m
0,25m
0,43m
0,25m
3,04m1,01m5,27m
2,00 m1,01 m5,27 m
3,50m
1,98m
3,50 m
1,98 m
0,87m
0,87 m 0,73 m
1,32m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE VRB 060 964 A
Vrijbuiter
RVS
30-10-2013
odules odules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
VRIJBUITER
VIERKANTVLOER 008RVS
VRB
MOD
11
VLOER 93 MOPLOOPNET031RVS
VRB
MOD12
213 M
Staander 93 vloer
052RVSVRBMOD33
247 MSTAANDER OPSTAP 054RVSVRBMOD14
ENKELSYSTEEMBUIS 075RVSVRBMOD15
Module RVSGlijbaan 93 cm
190RVS
VRB
MOD
1
6
AanbouwDuo Schommel
216RVS
VRB
MOD1
7
Schommel rood
Afschermwand
A232RVSVRBMOD1
8
Schommel blauw
Afschermwand
A
233RVS
VRB
MOD
1
9
8
7
3
4
5
6
1
9
Geleverde modules:
ie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Assembleer toren 1,3(3x),4,5,8,9
3 - Plaats toren
4 - Plaats 7 en verbind deze aan toren
5 - Plaats 2,6 en verbind deze aan toren
6 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
7 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Installation sequence:
1 - Dig the holes according to the ground plan
2 - Assemble tower 1,3(3x),4,5,8,9
3 - Place tower
4 - Place 7 and attach it to tower
5 - Place 2,6 and attach it to tower
6 - Check that the unit conforms to the dimensions on sheet 'dimensions'
7 - Close the holes and compacted the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Nature Play
Product code VRBE060.964
Name of equipment Vrijbuiter Klimklautertoestel
Maximum height of fall 1,4 m
Year of construction 2017
Certificate 035935
inspection authority TUV Nederland QA BV
De Waal 21c, Best - 5684 PH Best
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Combination equipment
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
VRBE060.964
Combination equipment

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
BORG RVS M10DOPMOER 020010011BSR41
M10 x 160 - RVS A2-70
Zeskantbout
160010021BSR42
M10SL ITRING 002010030BSR43
M10 x 30 x 2,5CARROSSERIERING 030010035BSR
44
Donut RoodBeschermdop M10-M12
030010DONKST
45
Dop roodBeschermdop M10-M12 030010DOPKST
4
6
ROND 15LAMELLENSTOP 005015
LAM
KST
47
VierkantVloer VRB
CCOA001
VRB
SHO18
Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD VRB RVS 008
VIERKANTVLOER
VRIJB ITER
2-1-2007
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module

OpmerkingBenamingRev.Bew.VolgnrProgr.Type
#
Nr
BORG RVS M10DOPMOER 020010011BSR41
4.8 X 12 - RVS A2-70Klinknagel bolko 050005014BSR162
ø10 X 60 - RVS A2-70
Houtdraadbout
060010022BSR23
M10SLUITRING 002010030BSR64
M6 - VZ 8.8
Zeskantmoer
005006017BSV45
M6 x 50 - VZ 8.8
Zeskantbout ISO 4014
050006021BSV46
M6 - VZ 8.8
Sluitring
002006030BSV8
7
1000x100x19
Anker laat
100
APL
KST18
VRIJBUITER RVSSYSTEEMBUIS
D
320505
VRB
SME
1
9
HANGNETVLOERKOKER 320562
VRB
SME
1
10
VRIJBUITER
OPLOOPNET
DBLW
005
VRB
SNT111
Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD VRB RVS 031 C
OPLOOPNET
VLOER 93 CM
9-1-2017
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
9
2
1
4
10
2
Let o : Net zodanig laatsen
dat het sla hangt
3
67 5
8
11
Grondmarkering
Ground level marker
0,85m0,90m