Bogen RPK86 User manual

Rear of Amplifier
Installation
For greater rear support when rack mounting an M-Class or Black Max amplifier, the
RPK86 Rack Mounting Kit can be attached to the rear of the amplifier by following the
steps below.
1. Remove and save the three cover screws from the chassis of the amplifier.
2. Position the rack attachment as shown.
3. Replace and tighten the three cover screws to secure the rack attachments.
Model: RPK86
M-Class & Black Max
Rack Mounting Kit
Specifications subject to change without notice.
© 2001Bogen Communications, Inc.
Part No. 54-2064-01R1Printed in USA. 0105 50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. [phone], Fax: [phone], www.bogen.com
Rear of Amplifier
Model: RPK86
M-Class & Black Max
Rack Mounting Kit
Specifications subject to change without notice.
© 2001Bogen Communications, Inc.
Part No. 54-2064-01R1Printed in USA. 0105 50 Spring Street, Ramsey, New Jersey 07446
Tel. [phone], Fax: [phone], www.bogen.com
Installation
For greater rear support when rack mounting an M-Class or Black Max amplifier, the
RPK86 Rack Mounting Kit can be attached to the rear of the amplifier by following the
steps below.
1. Remove and save the three cover screws from the chassis of the amplifier.
2. Position the rack attachment as shown.
3. Replace and tighten the three cover screws to secure the rack attachments.