Bogen HFCS1 User manual

SPECIFICATIONS HFCS1 HFCS1LP
Frequency Response (-10 dB)*65 Hz to 19 kHz 78 Hz to 19 kHz
LF Driver 6-1/2" (165mm) Polypropylene Cone
HF Driver 3/4" (20mm) Polycarbonate Dome
Sensitivity (1W/1m) 89 dBspl (Average 100 Hz - 10 kHz)
Impedance Ratings Low (16 ohms) / High (70V/100V)
Power Input (Max.) 75W @ 16 ohms; 32W @ 70V/100V
Power Settings (in watts)†70V: 32, 16, 8, 4, 2, 1 / 100V: 32, 16, 8, 4, 2
Baffle Material Fire-rated (94VO) ABS
Back Can Material Heavy-Gauge Steel
Terminations 4 Terminal Plug-in Input Connector
Product Weight 9 lb. 8 lb.
Speaker Dimensions 12-5/16" dia. x 12" D 12-5/16" dia. x 7-3/4" D
Minimum Vertical Clearance Requirement 11"6-3/4"
Included Accessories Input Terminal Cover (2 Halves); (4) Screws; (1) Plug-in Input Connector
Optional Accessories Tile Bridge Support Ring (TBCR); Cable Kit (CK10)
Baffle Ring & Grille Color Off-white or Black
• Wide-dispersion coaxial driver for broad, even coverage
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Large back can for deeper bass response (HFCS1/B)
• Low-profile housing allows greater range of installations
(HFCS1LP/B)
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps (in watts): 32, 16, 8, 4, 2, and 1 for 70V;
32, 16, 8, 4, and 2 for 100V
• 16-ohm input for non-transformer, multi-speaker
systems (selectable via tap selector switch)
• Compounded rubber surround, plus polypropylene and
polycarbonate drivers for lasting performance
• Easy wiring with plug-in connector
• Integral swing-out clamps for easy installation
• Connector provides loop-through terminals for the
next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet
provides protection for connections
• Off-white or Black textured finish easily painted to
match theme decor
• Attractive, contemporary, sturdy steel grille assembly
with fine perforations
• Listed to UL Standard 60065 for US and Canada
• Independently tested and meets requirements of
UL-2043 (report available)
• Accessory tile bridge support ring (Model TBCR,
sold separately)
• Accessory 10-foot long cable kit (Model CK10,
sold separately)
Features
Description
Specifications subject to change without notice.
© 2006 Bogen Communications, Inc.
54-8016-03D 1302
High-Fidelity
Ceiling Speakers
Models:
HFCS1 (Off-white) / HFCS1B (Black)
HFCS1LP (Off-white) / HFCS1LPB (Black)
The Bogen HFCS1(B) and HFCS1LP(B) ceiling loudspeakers deliver superior sound and clear intelligibility in a variety
of ceiling environments.
The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions.
Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under grille).
The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and
exceptional low-frequency response for both music and speech reinforcement.
Technical
Specifications
*Half-Space Response
† Front panel, switch-selected
HFCS1(B)
HFCS1LP(B)

The loudspeaker shall be a Bogen Model HFCS1 or
HFCS1LP Ceiling Speaker or approved equivalent, con-
sisting of one 6-1/2" (nominal) low frequency transducer,
one 3/4" (nominal) high frequency transducer, and a filter
network for dividing frequencies between the transducers.
The front baffle shall be injection-molded ABS material
and the back can (enclosure) shall be made of steel.
All components shall be mounted inside the enclosure.
The baffle shall be supplied in off-white or black (B ver-
sions) with a mild texture finish to promote paint adhe-
sion, if desired. A perforated steel speaker grille shall be
provided, color-matched to the baffle.
The low-frequency driver shall utilize a molded polypropy-
lene diaphragm (cone). A compounded rubber cone
surround shall be formulated to withstand environmental
conditions with high or low heat, high or low humidity, and
ultra-violet light.
The high-frequency driver shall utilize a diaphragm
consisting of black polycarbonate.
Integral swing-out clamps shall provide a secure installa-
tion in the ceiling surface. A safety cable attachment point
shall be included in the removable terminal enclosure
cover. An optional 10-foot long cable kit shall be available
to serve as a backup safety cable (Model CK10).
An optional tile bridge/support ring installation bracket
(Model TBCR) shall provide additional support when
mounting the loudspeaker into suspended ceilings. The
bracket shall also serve as a pre-installation guide for new
construction installations, and provide attachment to either
16" OC or 24" OC mounting.
The input connector shall be a 4-screw pluggable input
connector, providing loop-through terminals for additional
speakers.
Power input selection shall be via a front-mounted rotary
switch, located under the removable grille. High imped-
ance tap selections shall be 1, 2, 4, 8, 16, and 32 watts. A
low impedance 16-ohm selection shall also be provided.
Dimensions of the speaker shall not exceed 12-5/16"
diameter x 12" D (HFCS1/B) or 12-5/16" diameter x
7-3/4" D (HFCS1LP/B). The speaker shall require a min-
imum vertical clearance of 11" (HFCS1/B) or 6-3/4"
(HFCS1LP/B). Product weight shall be 9 lb. (HFCS1/B) or
8 lb. (HFCS1LP/B).
Architect and
Engineer
Specifications
50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
201-934-8500 • Fax: [phone]
www.bogen.com
Polar
Response
500 Hz
1 kHz
2 kHz
4 kHz
8 kHz
16 kHz
HFCS1
HFCS1LP
Frequency
Response
Half-space,
16 Ohms,
1W @ 1m
100 1000 10000
40
60
70
80
90
100
110
(dBspl)
(Hz)
Output Level @ 1m
Both speakers