How does it install? Simple.
REDUCE INSTALLATION TIME
)))))))))))))))
The EASY INSTALL speaker is designed to produce a
wide dispersion of sound even at higher frequencies
where other speakers begin to beam.
High Quality Sound
A wider dispersion area is produced by a combination
of direct and reflected sound paths.This provides
enhanced intelligibility and makes exact speaker
placement less critical.The new EASY INSTALL
speaker features a heavy O-ring at the base of the
speaker cavity to seal it tight to the ceiling tile.
Good Looking
A low-profile contemporary design allows this
versatile speaker to be installed anywhere, blending
nicely with the style of any environment because it
can be painted for those installations where color
coordination is a factor.
Lightweight and Durable
The EASY INSTALL speaker weighs only two pounds,
yet its ABS plastic shell is quite durable.
Easier to install! Faster to install! Enhanced coverage!
The EASY INSTALL speaker is a sound solution. Call
(201) 934-8500 today for the name of the Bogen
supplier nearest you.
PRODUCES A SMOOTHER, MORE CONSISTENT SOUND FIELD
The speaker’s two specially-designed studs
pierce the ceiling tile.
Wide-based wing nuts secure the speaker
assembly to the ceiling tile.
Tw o standard wire nuts connect the speaker
wires to the studs – and that’s all it takes!
((((((((((
Bogen’s new EASY INSTALL™speaker can be
completely installed – mounted in the ceiling,
secured, and connected – in less than a minute!
The time saved in installation has an immediate
impact on productivity, and that gives profitability
an instant boost.
No-Tool Installation
No more cutting holes in ceiling tiles! No more
wrestling with hardware! No more cleaning up
crumbled tiling! The savings in time add up along
the way...fewer parts, trouble-free installation, and
virtually no mess, so there’s nothing to dispose of.
Volume control is standard on both EASY INSTALL speaker models.
A high-quality, wire-wound volume control is an integral part of the
design. Although it's easily accessible, it doesn’t stand out so people
won’t be tempted to touch it. Installers can “tweak” it without going
back into the ceiling.
The studs are designed to easily pierce standard
ceiling tiles.They have smooth tips for secure wire
nut connections, and are also color coded for easy
polarity identification. One stud is nickel-plated, the
other copper-plated.The wing nuts are specially
designed to provide secure mounting and are easy
to handle as well.
A
B
C
Rugged wire-wound volume control standard
Durable, paintable finish
Smooth tip studs
for secure wire
nut connections
Large rubber O-ring seal – tight
seal on ceiling surfaces eliminates
whistles and ensures smooth
sound (no peaks)
Plated, color-coded studs
(nickel and copper) for
speaker phasing
Studs designed for
easy tile piercing
Wide-bottom, easy to
handle mounting wing
nuts provide secure
speaker mounting
Direct and reflected
sound paths for clear
wide dispersion sound
AB C
