Bolton Furniture AMBA1720 User manual

4/23/17 1 of 2 Loft Dining Table
Step 1
Read through these instructions thoroughly before beginning assembly. We have found this to be of great
value when first assembling this product.
Step 2
Loft Dining Table
Thank you for purchasing our Loft Dining Table. We have found it helpful to have a second
person present in at least one step of the assembly.
Assembly Instructions
Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.
2
A
NO. DRAWING DESCRIPTION Q'TY
TOP 1
B
CENTER
SUPPORT RAILS
C1
METAL SIDES
2
DM6*70MM BOLT 8
E
FM6*20MM BOLT
G
HWRENCH 1
4
M6*45MM BOLT
LEVELOR 4

4/23/17 2 of 2 Loft Dining Table
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface (like the carton or carpet) to prevent damage to the finish.
Step 3 and Step 4
Lay Top (A) upside down and attach 1 Metal Sides (B) with 4 6M x 70mm Bolts (D).
Attach Center Support Rails (C) to Top (A) with 2 6M x 45mm Bolts (E) and to the Metal Side (B) with 2 6M x 20mm Bolts (F).
DO NOT TIGHTEN FIRMLY AT THIS TIME.
Step 5
Note: It will help to have a second person at this time to assist in assembly.
Attach the other Metal Side (B) to Top with 4 6M x 70mm Bolts (D) and Center Support Rails (C) with 2 6M x 20mm Bolts (F).
TIGHTEN ALL BOLTS FIRMLY AT THIS TIME.
With Assistance turn the table over.
CARE
Clean with mild soap and wipe dry.
REPLACEMENT PARTS:
For best service, to order replacement parts go to www.alaterrefurniture.com.
Use the order form on the web site to order your replacement parts. Thank
You!