Bon Pergola Villa Pergola Double Bay User manual

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
User Instructions
Villa Pergola for motorized operation
Size: Size: 13’x19’ Double Bay
( 400 x 600cm )
*Please visit www.bonpergola.com for the
latest instruction under Q&A section*
Size: 13’x19’
146"
158"
156"
228"
226"
97 1/2"
105" 105"
104"
v2023.01

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Content
Tools and man force ............................................................................3
Parts List..............................................................................................4
Product Description..............................................................................5
Safety Instruction..................................................................................6
Mounting................................................................................................7-18
Dismounting...........................................................................................20
Storage...................................................................................................20
Disposal..................................................................................................20
Dear Customer,
Congratulations and welcome to our Villa Pergola family. To enjoy your Villa Pergola for
its lifetime and for you and other’s safety, please follow the assembly instructions.
Before you start the assembly process and using the Pergola, we suggest you are best
to get familiar with this product. Make sure all parts listed up in below packing lists are
delivered and intact. If you find that there are parts missing or damaged please do not
install the pergola but contact us immediately. Do not start the assembly process if parts are
missing or defective.
Attention:
Read this instruction manual carefully and completely before mounting and usage.
Keep this manual for future reference.

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Tools and man force
Recommended: 2 or 3 people
Additional tools :
1. Ladder
2. M10/13 open wrench supplied
3. Rubber mallet
4. Tape measure
5. 5mm hexagon wrench supplied
6. Pencil
7. Spirit level
8. Electric drill
123
Parts List
*Please check all parts against the parts list before commencing construction of pergola.*
SIZE: 13’x19’ or 400X600CM (double bay) PARTS LIST
x24
x2
x6
x4
x2
x140
x24
x4
Gutter connector
M10X100 expansion bolt
M8x20 Hexagon bolt
M10 screw cap
Upright cover
Base plate
50 to 40 connector
M8x20 countersunk screw
3
4
5
6
x128
Plastic Spacer
7
x128
Locking nut
8
x1
Motor with motor bracket
9
x1
Motor with motor bracket
10
11
12
1
2
x6
Footing plate cover
13
>1.5m
x2

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Parts List
*Please check all parts against the parts list before commencing construction of pergola.*
x1
x1
x2
x2
x2
x2
x4
x60
x2
Connecting rod
Driving louver
Center louver
Common louver
Gutter
Gutter
x2 Gutter
Post + post connector
Beam
Louver beam with
Motor connection holes
Louver beam with
Motor connection holes
x2 Beam
x1 Center Beam
x1
C4
x1
C5
x1
C1
x1
C3
x1
C5
x1
C2
D1
D2
D3
E
A1
A4
A2
A3
A5
B1
B2
B3

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Aluminum profile parts list
Louver beam with
Motor connection holes
Louver beam with
Motor connection holes
Gutter
Gutter
Gutter
Center Beam
Post + post connector
C4
C5
C1
C3
C5
C2
Beam
Beam
A1
A4
A2
A3
B1
B2
B3
A1
A1
A4
A4
A2
A5
A3
B1 B1
B1
B1
B2
B2
B3
B3
C1 C2 C3 C4 C5
A5

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Product Description:
Important Safety Instructions:
Make the most of your outdoor living area with your pergola.
Relax and enjoy the outdoors while being protected from sun.
The coated aluminum frame pergola is perfect for shading your garden, deck,
courtyard and swimming pool.
Warning: For the safety of you and other persons it is important to follow below
instructions and obey warnings.
Symbol explanation
Safety instructions
This warning triangle calls attention to hazards that that can lead to death
or to severe injuries or which are important for the functioning of the Pergola.
This sign identifies important notes.
• you are unsure if the pergola can be mounted on the place you chose for installation.
• you do not understand the instruction manual or parts of it.
• you do not have necessary tools available.
• you do not have necessary technical knowledge
To install this pergola technical knowledge is necessary.
Do not mount this pergola yourself but contact a professional workman for help if
A minimum of three healthy adults are required to move and install the pergolaas the
product is big and heavy. Do not try to install the pergola alone. If the pergola falls,
it could cause serious injuries and damages! Contact an authorized assembler for help.
Do not install the pergola when you find damage parts are that parts are missing.
Contact your dealer.
Keep children and pets out of the working area during assembly and adjustments.
This product and its fixing parts are only suitable for installation on a plain cement
wall or stable brickwork. If the wall/brickwork shows cracks you have to consult a professional.
Nobody is allowed to change the products’ design and structure without the permission
of manufacture or authorized deputy.
Please make sure that your hands are clean at the time of the assembly;
otherwise you may soil frame.
Nobody is allowed to climb onto the Pergola. Hanging anything on the Pergola is forbidden.
Sheeting was used to protect the paint. This must be removed afterwards.
This structure is a non-permanent structure and the warranty does not cover damage incurred
under extreme weather conditions including heavy rain, high winds or if exposed to high heat
from heaters or BBQs.
Safety precautions should always be followed when assembling and using this product to
reduce the risk of personal injury and damage to equipment. Please read all instructions
before assembly and use. Never leave children unattended around/under this pergola.
Do not attempt to assemble or use the pergola in moderate or heavy wind conditions.
Always keep the pergola louver open and secure it during heavy winds or extreme weather
conditions to avoid damage to the pergola or personal injury.

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 1
Attach base plate ③ x6 to the bottom of posts ( x1 x2),
use bolts ① x24 to attach with hex key or electric drill.
& , & , & posts should be installed diagonally as below.
Please make sure all posts on the same horizontal plane.
C5 C5
C5
x1
x2
Post + post connector
Middle Post + post connector
x6
Base plate
x24
M8x20 countersunk screw
C4
C5
C1
C3
C2
C4C1 C3C2
C4C1 C3 C2
***NOTE: If you will need to
cover the anchor with
footing plate cover, put
them on before attach
base plate to post
x6
Footing plate cover
Optional
C4
C5
C5
C1
C3
C2
3
Optional
12
1
C

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 2
Attach beam x2 ,beam x2 ,beam x1,beam x1 ,
Center Beam x1,use bolts ⑥ x32 to fasten.
Louver beam with
Motor connection holes
x32
M8x20 Hexagon bolt
x2
Beam
x1
Louver beam with
Motor connection holes x1
x2
Beam
A1
A4
A2
A3
A5 x1
Center Beam
A1 A4 A2 A3
A5
A1
A1
A1
A5
A4
A4
A4
A2
A3
A3
A4
A3
A4
C1
C2
C4
C5
C3
C5
A4 before A3

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 3
x4
M8x20 Hexagon bolt
Use bolts ⑥ x4 to fasten both sets of beam & beam .
***Note: This process is extremely important to ensure the structure is stable.
A1 A4
C4
C5
C1
C3
C5
C2
A1
A1
A4
A4

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 4
x4
Upright cover
x8
M8x20 Hexagon bolt
Attach upright cover ④ x4,use bolts ⑥ x8 to fasten
C4
C5
C1
C3
C5
C2

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
B1
B1
B1
B1 B2
B2
B3
B3
Step 5
1.Slide the ⑨ and ⑩motor into gutter before hooking onto
the & beam in the direction as shown below.
2.Attach all eight gutters x4, x2, x2 by hooking inside the , , beams.
x4
Gutter
x2
Gutter
x2
Gutter
x1
Motor with motor bracket
B1
B2
B3
9
10
A1
A2 A3
B1
B2
B2 B3 A2 A3
9
B2
10
B2
A3
A2

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 6
1. Fasten x4 gutter connector (x6 for certain model)
Optional: Put self tapping screw through the gutter into the the beam afterward to further secure.
2. If motor wire is running downward through the post, use to connect with as
shown below to not allow water drain through this post.
x2
50 to 40 connector
x4
Gutter connector
12
2
12
212
C4
C5
C1
C3
C5
C2
12
B2
B1
12
B1
B2

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 7
Fasten motor ⑨ x1 + ⑩x1 with its screws as shown below.
x1
Motor with motor bracket
9
10
9
C4
C5
C1
C3
C5
C2
10

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 8
Connect the female and male plugs for the LED lighting
(DC24V to DC24V) and motor (DC24V to DC24V) and
Plug the power cable into local socket.
***Note: You can test your motor at this stage. Plug in and use its remote.
x1
Motor with motor bracket
9
10
C4
C5
C1
C3
C5
C2
Main power
Poqwe plug
DC24V
DC24V
Main power
DC24V for motor
DC24V for light
9
10
Poqwe plug

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 9
1. Located holes in center of beams( , , )
2. Place Center Louver into center hole/slot which on beam , , ,
lining up with the holes for 13’ x19’ (600*400 cm) size.
3. Use M10 nut ⑤x2 to secure the Center Louver in place
4. Place Driving Louver in line with 7th slot(check below direction) on the beam , , ,
5. Place all Common Louvers into the remaining slots in the beams
D3
D2
9
D3
10 D3
A2 A3 A5
D3
D2
x2
M10 screw cap
x60
Common louver
D1
x2
Center louver
D2
x2
Driving louver
D3
D1
A2 A3 A5
A2 A3 A5
A2
A5
A3
D2
C4 C5
C1
C3
C5
C2

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 10
Fix x 4 (flat L-shaped aluminum profile).
One for each side on the louvers is required.
Use bolt ⑥ x128, plastic spacer ⑦ x128 and nut ⑧ x128 to tighten for 600X400cm size.
Secure the louvers at each end.
***NOTE:
1. Do not over tighten. If over tighten, louver will not move and possibly damage the louver
driver component. Please test the louvers are rotatable by hands smooth and easy to
confirm it's not over tighten.
2. Please make sure the Nylon Washer is in between the J and Louver End Cap.
Locking nut
Plastic Spacer
x96 x96 x96
M8x20 Hexagon bolt
Ex4
Connecting rod
E

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 11
*Check for cross diagonal distance A are equal.
*Check for diagonal distance in between the posts B and C are equal.
*Please note, this step is very important to ensure the pergola are in a rectangle shape in any angle.
It’s extremely important if you are installing a screen before anchor the pergola down or afterward.
C
A
A
B
B
BB
CC
Post
Post
Post
Post
B
B
B
B
CC CAA

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Step 12
Mark holes for Wedge Anchor/Bolt ⑪ x24 for each post
Note the drill size should be 12 mm.
Insert the bolts. Use a hammer drill if necessary.
Place the posts over the bolts. Tighten the nuts.
Once installed, make sure any remaining plastic is removed and silicone is used
along all corners and gutters to be waterproof.
x24
M10X100 expansion bolt
11
IMPORTANT NOTE:
If you order the screens, please anchor down the pergola to the ground AFTER
installing the screens onto the pergola as it might require minor adjustment to
make screens fit perfectly.
WARNING:
Make Sure louvers are open during periods of mild to strong winds to avoid damage overtime
x4
11

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Motor set up
※86mm*86mm, in accordance with international installation standard;
※The electric structure is partial conformity with the standard fire protection requirement of the electrician;
※Industrial grade microcomputer chip is used to improve product quality and reliability greatly;
※Use shock-proof current relay;
※Components using precision SMT industry, surface moisture-proof treatment;
※Power supply has safety protection, power supply time is 5 minutes;
※It is used with various emiters and tubular motors.
1.Function and Features
HC-PM03F\D-T1
① Motor: Up button
② Motor: Stop button
③ Motor: Down button
④ Light bulb: turn on/off button
HC-PM03\D-T1
⑤ Motor: Up button
⑥ Motor: Stop button
⑦ Motor: Down button
⑧ Light bulb: turn on/off button
Product name Remote controller with light control
Product model
Receiving/
transmitting frequency
Working temperature -20℃~+85℃
Receiving sensitivity -110dBm
Allowed number of
transmitters
3-2
*Within 7 seconds after plug in or power on*
Open the back cover of the remote control and
press and hold the code key for more than 5 seconds
with a fine needle.
3-3
When the motor keeps beeping “dididi”
3-4
Press the “up button” of the remote
control once and hear the beep of the
motor, and the code matching is
successful
3-4
Press the “down button” of the remote
control once and hear the beep of the
motor, and the code matching is
successful
HC-PM03F\D-T1
≤8pcs
433.92MHz
Product name Remote controller with light control
Product model
Receiving/
transmitting frequency
Working temperature -20℃~+85℃
Receiving sensitivity -110dBm
Allowed number of
transmitters
HC-PM03\D-T1
≤8pcs
433.92MHz
5 seconds
3-1
Must unplug over 10
seconds before plug in
2.Product Parameters
3.Operating Instruction
A. Learning code
B. Deleting code 3-3
When the motor keeps beeping “dididi”
5 seconds

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19
Dismounting
Storage
Disposal
If you want to disassemble the Pergola, please follow the following process.
Attention! At least two people are needed for this step.
• Keep the Pergola louvers open before you begin with dismounting. Bind the Louvers
of the Pergola together to avoid unintended unfolding. This might cause damage and injury.
You can use the protection band that was fixed on the Pergola when purchasing it.
• Follow the mounting instructions in reversed order to dismount the Pergola.
• Make sure that drilling holes in the wall will be sealed professional.
• Attention! Safety hints and instructions have to be followed for dismounting as well.
When you do not want to use the Pergola for a longer period of time it is recommended to
take the Pergola out of the brackets and store it.
• Make sure that the frame is dry completely before storing.
• Store the Pergola at a dry and safe place that is not reachable for children.
Do not dispose this Pergola with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmentally safe recycling. Dispose packing materials according
to local guidelines.
20