
R4A
URCHIN
QUICK START GUIDE
POWERING THE URCHIN:
To turn ON the URCHIN, press and hold the power button
(pictured in red) for 2 seconds. The power LED, located to the
right of the power button, will turn solid green when the Urchin
is ON.
To turn OFF the URCHIN, press and hold the power button for
2 seconds. The power LED will flash green and turn off when
the Urchin is OFF.
To CHARGE the URCHIN, plug the Micro USB cable into the
input behind the port door. The power LED will turn red to
indicate the URCHIN is charging. When charging is complete,
the power LED will turn off.
PAIRING WITH THE URCHIN:
To pair your device with the
URCHIN, press and hold the
Bluetooth button (pictured in
orange) for 3 seconds. The
Bluetooth LED, located to the
left of the Bluetooth button,
will flash blue when the URCHIN
is in pairing mode. In
the settings on your device,
select “Urchin R4A” and
connect. Once your device
has paired successfully,
the URCHIN will make a tone
and the Bluetooth LED will
turn solid blue.
USING THE URCHIN:
Volume Up
Press Once:
Play / Pause
Answer / Hangup
Phone Call
Press Twice:
Track Forward
Press Three Times:
Track Back
Volume Down