Boomerang CycloTrac User manual

CYCLOTRAC
A
N
T
I
-
T
H
E
F
T
•
G
P
S
•
M
O
T
I
O
N
D
E
T
E
C
T
I
O
N
Boomerang CycloTrac
Manual
The Boomerang Cyclotrac is a cloud based activity
monitor for bicyclists. When you get on the bike,
CycloTrac knows you’re there, gathers your data, and
uploads it to the cloud in real time. You focus on
enjoying your ride and the cycling experience, knowing
all of the data is there for you, all the time. No more
post�ride downloads or adding and removing hardware
from your bike. The anti�theft element of the CycloTrac
system has the potential to entirely change the mindset
of how often you use your bike or even what kind
of bike is purchased.
Register the CycloTrac at www.Boomerangbike.com
and install the mobile phone app. The mobile app is
the primary interface for setting and controlling the
CycloTrac.
The CycloTrac should be charged before use. Charging
is through the micro�USB port. The CycloTrac can be
connected to a wall charger, computer, or other USB
standard port with +5V power for charging. If the
battery is fully depleted, charging time can be up to
4 hours.
Operation On/Off
The natural state of the device is ‘asleep’. It wakes up
or ‘turns on’ with movement. If you want to record a
trip, go to the settings and turn on Auto-Start.
Mapping
When Auto Start is on activates continuous logging
and mapping. Mapping is automatic as long as the
bike is in motion and stops when the bike is still for 3
minutes. A trip will report path travelled, distance, trip
time, calories burned, elevation and more viewed in the
Dashboard on BoomerangBike.com. Data can also be
uploaded to third party apps such as Strava.
Set Alarm
1. On the bottom of the app press Set Alarm. 2. Slide to
activate. The arm icon will close and turn red. If the
bike is moved, an audible alarm will sound and the user
will receive a text message and email indicating
suspicious activity. 3. The alarm function is turned off by
sliding the Deactivate icon OFF. After a few seconds
the alarm will open and the icon will turn from red to
OFF (blue).
Sound Alarm
To test alarm, arm the bike and move it. You should
hear an audible alarm and get a text message. Make
sure your unit is charged and the GPS and Alarm lights
are on.
For battery savings, the CycloTrac will shut down
(deep sleep mode) all non�essential functions if it is
not moved for about 3 minutes (default). The Cyclo-
Trac automatically wakes up by sensing motion.
The bike mounted CycloTrac is ready for use
once the yellow GPS light is flashing continuously.
The alarm function is still active, even when the
CycloTrac is in deep sleep. The user can park the
bike, set the alarm, and have the security of knowing
that the system will automatically wake upon
movement, sound the alarm, and provide text and
email notifications of tampering, weeks or even
months later.
Troubleshooting
If the unit seems unresponsive, make sure it is recharged
for 4 hours. If there is no response to movements follow
these steps: 1. Make sure there is a full charge. 2. Press
and hold Reset button for 3 seconds. LED’s should blink.
Restart successful. 3. If Step 2 fails, activate Reset
Button 2 (in the small hole next to the USB port) by
pushing in a smalll paper clip or tack. LED’s should blink.
Contact us if there is no response.
USB Charging
Port
Soft Reset
Button
GPS
Blinks when the
unit is awake and
GPS is active.
Lock
When the alarm is
set (on) this light
will blink
Battery
Solid when the unit
is charging (connected
to USB) Off when the
battery level is OK
Blinking when the
battery level is low
Logging & Mapping
Blinks when the
CycloTrac is logging
and mapping a ride.
A CycloTrac helps deter theft by
being visible and reliable with the
addition of a good lock. Heavy-duty
U-locks and jacketed hardened
chain locks are ideal.
Set up a Geo-Fence to receive
text messages when bike
crosses the perimeter in the app.
Reset Button 2

CYCLOTRAC
1885 De La Cruz Blvd. I Suite #205 I Santa Clara, CA95050
[e-mail] I 408 718-4240
Boomerangbike.com
OWNERS MANUAL
Gotcha!
Boomerang CycloTrac
Quick Start Guide
Hardware
• CycloTrac • 6 ft USB charging cord
• 3 Tamper proof Screws • 1 screw bit
Hardware Instructions
1. Charge CycloTrac for 4-6 hours.
2. Remove your waterbottle cage.
3. Place your CycloTrac in the frame.
4. Put water bottle cage on top of the CycloTrac.
5. Use screw provided to mount both CycloTrac
and waterbottle cage.
App Instructions
1. Download the App from the Apple Store or
Google Play
• Search for Boomerang’s CycloTrack GPS Anti-
Theft device.
2. Log in to the App
• User Name: Last name
• Password: Your phone number
3. Settings
• Set metric or US Standard.
• Auto record is like an on off switch. When
you want to record a trip turn on auto record.
• Select a bike.
4. Alarm
• Press the button left bottom and slide the
slider over to arm your device.
• To turn off the alarm slide the slider.
5. Find my bike
• Press the button on bottom right.
Dashboard
1. Go to URL System.boomerangbike.com
2. User name: last name
3. Password: phone number
4. View your trip and bike information
REGULATORY NOTICE
This equipment is designed and manufactured not to
exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications
Commission of the U.S. Government and Industry Canada.
The exposure standard employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR
limit relevant for the application described in this
manual is 1.6W/kg.
Tests for SAR are conducted using standard operating
positions accepted by the FCC with the device transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the equip-
ment while operating can be well below the maximum
value. This is because the device is designed to operate
at multiple power levels so as to use only the power
required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the
power output.
Equipment Authorization has been granted to this model
with the reported SAR level(s) evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on
this equipment is on file with the FCC and can be found
under the Display Grant section of:
www.fcc.gov/oet/ea/fccid after searching on the FCC
ID as printed on the equipment.
This equipment has been tested to comply with FCC and
IC radiation exposure limits set forth for an uncontrolled
environment when used for the documented intended
purpose and when mounted and operated as shown in
this user manual. The equipment has been tested for a
minimum distance of 30mm between the device and
the human body.