Bosch WQG233D0NL User manual

Tumble dryer
WQG233D0NL
User manual and
installation instructions
Translated from Dutch to English - www.onlinedoctranslator.com

Refer to the Digital User Guide for more
information.
Table of contents
1 Safety................................... 4
1.1 General instructions ............. 4
9 Programs ................................ 26
9.1 Automatic programs ..... 26
9.2 Time programs.................................. 271.2 Destination of the device
comb ............................................. 4
1.3 Restriction of users ...... 4
1.4 Safe installation...................... 5
1.5 Safer use ................................ 7
10 Accessories.............................. 29
11 Laundry................................... 30
11.1 Preparing laundry.......... 30
1.6 Safe cleaning and
maintenance ............................................ 10 12 The Ministry in essence......... 30
12.1 Switching on the device ............ 30
12.2 Set program .............. 30
2 Avoiding material damage ...... 11
3 Environmental protection and saving
ring................................................ 11
12.3 Filling the drum with
laundry ............................................ 30
3.1 Disposal of the packaging .... 11
3.2 Saving energy.................. 11
3.3 Energy saving mode ........ 12
12.4 Starting the program ... 31
12.5 Loading laundry ................ 31
12.6 Program cancel................... 31
12.7 Taking out laundry ................ 31
12.8 Switching off the device .......... 31
12.9 Fluff filter ............................. 31
4 Setup and connection ............. 12
4.1 Unpacking the device .................. 12
4.2 Scope of delivery .................... 12 12.10 Filter system of the bottom
unit ................................ 33
4.3 Requirements regarding the installation
location ................................ 13 12.11 Condensation water tank ........ 34
4.4 Water drain hose................... 14
4.5 Adjusting the device .......... 16 13 Child lock ................................ 35
13.1 Activating the child lock ............... 35
13.2 Deactivating child lock............ 35
4.6 Connecting the device
electrically................................................. 16
5 Getting to know your device......... 17
5.1 Device .................................... 17
5.2 Control panel.................. 18
14 Basic settings .................... 35
15 Cleaning and maintenance .......... 36
15.1 Tips for cleaning and
maintenance................................... 36
6 Display ....................................... 19
7 Buttons .................................... 22 15.2 Bottom unit ....................... 36
15.3 Humidity sensor ................ 39
8 Drying purpose .................................... 25
8.1 Changing drying target................... 25
8.2 Adjusting the drying target............. 25
2

NL
16 Troubleshooting ................ 40
17 Transport, storage and
disposal................................... 45
17.1 Preparing the device for
transport ................................ 45
17.2 Disposal of your old
device ............................................ 45
18 Service................................... 46
18.1 Product number (E no.) and
production number (FD) ........... 46
19 Consumption values .................... 47
20 Technical data............. 48
3

NLSafety
1 Safety
Please observe the following safety precautions.
1.1 General instructions
¡Read these instructions for use carefully.
¡Keep the instructions for use and product information for later
for use or for subsequent owners.
¡Do not connect the device in case of transport damage.
1.2 Destination of the device
Only use the device:
¡for dryer-suitable and water-washed textiles
to dry and freshen up.
¡for domestic use and in closed areas within the home
normal environment.
¡up to an altitude of 4000 m above sea level.
1.3 Restriction of Users
This appliance can be operated by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and/or knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and have
understood the resulting hazards. understood. Children are not allowed
to play with the device.
Cleaning and user maintenance shall not be carried out by children
unless they are supervised.
Make sure that children under 3 years of age and pets cannot reach
the device.
4

SafetyNL
1.4 Safe installation
Observe the safety regulations when installing the device.
WARNING ‒ Risk of electric shock! Improper
installations are dangerous.
▶Only connect and use the device according to the information on
the rating plate.
▶Only connect the device to an alternating current mains via a
properly installed earthed socket.
▶The protective earth system of the electrical domestic installation
must be installed in accordance with the electrical regulations.
The installation must have a sufficiently large core diameter.
▶When using an earth leakage circuit breaker, only use a type
with the sign.
▶Never power the device via an external switching device, for
example a timer switch or remote control.
▶Never connect the appliance to a circuit that is regularly switched
on and off by the utility company.
▶If the device is built-in, the mains plug of the mains connection
cable must be freely accessible, or if free access is not possible,
an all-pole disconnection device must be installed in the
permanently installed electrical installation in accordance with
the installation instructions.
▶When setting up the device, ensure that the power cord is not
pinched or damaged.
Damaged insulation of the power cord is dangerous.
▶Never bring the power cable into contact with hot appliance
parts or heat sources.
▶Never bring the power cord into contact with sharp points or
edges.
▶Never kink, pinch or alter the power cord.
5

NLSafety
WARNING ‒ Risk of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶Do not use extension cords or multiple sockets.
▶If the power cord is too short, contact customer service.
▶Use only adapters approved by the manufacturer.
WARNING ‒ Risk of injury!
The high weight of the device can cause injuries when lifting.
▶Do not lift the device alone.
If this appliance is installed incorrectly in a washer-dryer column,
the installed appliance could fall down.
▶Only stack the dryer on a washing machine with the dryer
manufacturer's connection set
→ "Accessories", page 29 Any other installation method is not
permitted.
▶Do not install the appliance in a washer-dryer column if the dryer
manufacturer does not offer a suitable connection set.
▶Do not install appliances from different manufacturers and with
different depths and widths in a washer-dryer column.
▶Do not place a washer-dryer column on a platform, as the
appliances may tip over.
WARNING ‒ Risk of suffocation!
Children can pull packaging material over their heads and become
entangled and suffocate.
▶Keep packaging materials away from children.
▶Do not allow children to play with packaging materials.
CAUTION ‒ Risk of injury!
The device may vibrate or move during operation.
▶Set up the device on a clean, flat and sturdy surface.
6

SafetyNL
▶Level the device using the device feet and a spirit level.
There is a risk of tripping if hoses and mains connection cables are
not properly laid.
▶Lay the hoses and connecting cables in such a way that people
cannot trip over them.
If the appliance is moved by protruding parts, such as the loading
door, the parts may break off.
▶Do not move the device by protruding parts.
CAUTION ‒ Risk of cutting!
Sharp edges on the device can cause cuts if touched.
▶Do not touch the device on sharp edges.
▶Use safety gloves when installing and transporting the device.
1.5 Safer use
WARNING ‒ Risk of electric shock!
A damaged device or power cord is dangerous.
▶Never use a damaged device.
▶Never pull on the power cord to disconnect the device from the
mains. Always pull the plug on the power cord.
▶If the device or the power cord is damaged, immediately unplug
the power cord from the socket or switch off the fuse in the
meter cupboard.
▶Contact the service department. → Page 46 Penetrating
moisture can cause an electric shock.
▶Only use the device in closed rooms.
▶Never expose the device to excessive heat and humidity.
▶Do not use a steam cleaner, high-pressure cleaner, hoses or
nozzles to clean the device.
7

NLSafety
WARNING ‒ Risk of health hazard! Children could become
trapped in the device and endanger their lives.
▶Do not place the appliance behind a door that blocks or prevents
the appliance door from opening.
▶In the case of discarded appliances, unplug the power cord from
the socket, then cut the power cord and damage the lock of the
appliance door in such a way that the appliance door no longer
closes.
WARNING ‒ Risk of suffocation!
Children can inhale or swallow small parts and choke.
▶Keep small parts away from children.
▶Do not allow children to play with small parts.
WARNING ‒ Risk of explosion!
Coal dust or flour in the vicinity of the appliance can lead to
explosions.
▶Keep the area around the device clean during use.
WARNING ‒ Risk of poisoning!
The condensation water from this device is not drinking water and may be
contaminated with fluff.
▶Do not drink or use the condensation water from the device.
Washing and care products can lead to poisoning if ingested.
▶If accidentally swallowed, consult a doctor.
▶Keep washing and care products out of the reach of children.
8

SafetyNL
WARNING ‒ Risk of fire!
The refrigerant R290 in this device is environmentally friendly but
flammable and can ignite upon contact with open flames or ignition
sources.
▶Open flames and other ignition sources away from it
keep the device.
WARNING ‒ Risk of explosion!
Residues in the fluff filter can ignite during drying.
▶Clean the fluff filter regularly.
Highly flammable objects, such as lighters or matches, can ignite
during drying.
▶Remove all highly flammable objects from the laundry pockets
before drying.
If unwashed laundry comes into contact with solvents, oil, wax,
wax remover, paint, grease or stain remover, it can ignite during
drying.
▶Do not dry unwashed laundry in this appliance.
▶Rinse the laundry thoroughly with hot water and detergent
before drying.
▶Do not use the appliance if the laundry is previously cleaned
with industrial chemicals.
WARNING ‒ Risk of fire!
If drying is stopped prematurely, the laundry has not been cooled
sufficiently and could catch fire.
▶Do not cancel the drying program prematurely.
▶If drying is stopped prematurely, immediately remove and
spread out the laundry.
CAUTION ‒ Risk of injury!
The cover plate may break when climbing or clambering onto the
device.
▶Do not climb or clamber onto the device.
9

NLSafety
The appliance may tip over when sitting or leaning on the open
door.
▶Do not sit or lean on the appliance door.
▶Do not place objects on the appliance door.
Reaching into the rotating drum can cause injury to the hands.
▶Wait until the drum has come to a complete stop before reaching into the
drum with your hand.
1.6 Safe cleaning and maintenance
Observe the safety regulations when cleaning and maintaining the
device.
WARNING ‒ Risk of electric shock! Improper
repairs are dangerous.
▶Only trained specialist personnel may carry out repairs on the
device.
▶Only original spare parts may be used to repair the device.
▶If the power cord of this appliance becomes damaged, it must
be replaced by the manufacturer, its service agent or a similarly
qualified person to avoid hazards. Penetrating moisture can
cause a shock.
▶Do not use a steam cleaner, high-pressure cleaner, hoses or
nozzles to clean the device.
WARNING ‒ Risk of injury!
Using non-original spare parts and non-original accessories is
dangerous.
▶Use only original spare parts and original accessories from the
manufacturer.
WARNING ‒ Risk of poisoning!
Toxic fumes can be produced when using solvent-based cleaning
agents.
▶Do not use cleaning agents containing solvents.
10

Avoid material damageNL
Foam or foam rubber can deform or
melt when drying.
▶Do not dry laundry containing
foam or foam rubber.
Unsuitable cleaning agents can
damage the surfaces of the device.
▶Do not use sharp or abrasive
cleaning agents.
▶Do not use cleaning agents
containing strong alcohol.
▶Do not use hard scouring or
dishwashing sponges.
▶Clean the device only with water
and a soft, damp cloth.
▶Immediately remove all detergent
residues, spray residues or residues
upon contact with the device.
2 Material damage
avoid
Follow these instructions to avoid
damage to property and the device.
NB!
Incorrect dosage of fabric softeners,
detergents, care products and
cleaning agents can affect the
operation of the appliance.
▶Follow the manufacturer's
dosage recommendations.
Exceeding the maximum load
quantity will affect the operation of
the device.
▶Maintain and do not exceed the
maximum load for each program.
→ "Programs", page 26
Overheating of the device can affect
the operation of the device.
▶Keep the air inlet of the device
clear during operation.
▶Ensure sufficient ventilation in the
room.
Light objects, such as hair and fluff,
can be sucked into the air inlet of the
device during operation and affect the
operation of the device.
▶Keep the area clean while using
the device.
▶Keep light objects away from the
device.
Operation with missing, incomplete or
defective fluff protection (depending
on the device equipment, e.g. fluff
filter, fluff container, filter mat) can
lead to damage to the device.
▶Do not use the device with missing,
incomplete or defective lint
protection.
3 Environmental protection and
saving
3.1 Disposal of the packaging
The packaging materials are
environmentally friendly and can be
reused.
▶Dispose of the individual
components separately by type.
3.2 Save energy
If you follow these directions, your
device will use less power.
Use the device in a well-ventilated
area and keep the air inlet of the
device clear.
aImpeded air exchange
extends program duration and
increases energy consumption.
11

NLSet up and connect
Spin the laundry in the washing
machine before drying. 4 Setup and connection
aMoist laundry extends the
program duration and increases
energy consumption. 4.1 Unpacking the device
NB!
Objects left in the drum that are not
intended for use with the appliance
can cause damage to property and
equipment.
▶Remove all these items and the
supplied accessories from the drum
before use.
Observe the maximum load of the
programs.
→ "Programs", page 26
aAn exceedance of the maximum
male load quantity extends the
program duration and increases
energy consumption.
Clean the fluff filter after drying →
Page 31 .1.Completely remove packaging
materials and protection from the
device.
aA dirty fluff filter
reduces the air flow in the device,
extends the program duration
and increases energy
consumption.
→ "Disposing of the packaging",
Page 11
2.Check the device for visible
damage.
After cleaning, place the filters in the
filter system of the bottom unit
→ Page 33 dry well.
3.Open the appliance door.
→ "The Ministry in Essentials",
Page 30
aWetter filters extend the lifespan
program duration and increase
energy consumption.
4.Remove the accessories from the
drum.
5.Close the appliance door.
3.3 Energy saving mode 4.2 Scope of delivery
If you do not operate the device for a
long time, the device automatically
switches to energy saving mode. All
clues disappear and
Start/Pauseflashes.
The energy saving mode is exited
when you operate the device again.
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
NB!
Operation with incomplete or
defective accessories may impair the
operation of the device or cause
material damage and damage to the
device.
▶Do not use the device with
incomplete or defective accessories.
▶Replace accessories before using
the device.
→ "Accessories", page 29
12

Set up and connectNL
Delivery scope
catch
Description Staging location
On the floor
To demand
The device on
a clean, efficient
fen and firm on-
place surface.
The device
set
→ Page 16 .
Tumble dryer
Accompanying
documents In a laundry
drying column
The device al-
borrow with the
original connecting
set of the dro-
ger manufacturer
a washer-dryer
set up a column.
→ "Accessories",
Page 29
Water drain hose
with connection
adapter, fastening
going material
and bend.
→ "Water drainage
feeding tube",
Page 14
→ "Accessories",
Page 29
This device al-
borrow a washing
machine from
same manufacturer
places. The
depth and breadth
te of this device
must be used
the measurements
of the washing machine
chine corresponding
men.
The washer-dryer column
do not post on a
platform.
4.3 Requirements regarding the
installation location
NB!
If the device is tilted more than 40°,
residual water can escape from the
device and cause material damage.
▶Tilt the device carefully.
▶Transport the device upright.
Freezing residual water in the device
can damage the device.
▶Do not place or use the device in
frost-sensitive locations or
outdoors.
If the device is used immediately after
transportation, the refrigerant in the
device may cause damage to the
device.
▶Allow the device to rest for two
hours immediately after transport
it is put into use.
On a wall No snakes
between wall and
device clamp
men.
13

NLSet up and connect
4.4 Water drain hose 1.Pull the condensation water hose
from the connection.
Condensation water is formed during
drying, which your appliance uses for
automatic cleaning. Use the water
drain hose to direct excess
condensation water directly into the
waste water.
Comments
¡Use this device with the
supplied water drain hose. When you
connect the water drain hose
→ Page 14 , you do not have to
regularly empty the condensation
tank → Page 34 . ¡You can do this
optional
→ "Accessories", page 29 order from
the service department.
The condensation water hose is connected
to the connection at the factory.
Remark:When removing the
condensation water hose, liquid
may escape from the
connection.
Connect the water drain hose
If you do not wish to empty the
condensation tank of the device
regularly, connect the water drain
hose.
2.Slide the condensation water hose
onto the holder.
NB!
When using the device without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
▶Before using the device, connect the
condensation water hose or the
water drain hose properly.
Requirements
¡The device and its accessories
have been unpacked.
→ "Unpacking the device", page 12
¡The device is on the installation
place set up.
→ "Requirements regarding the
installation location", Page 13
14

Set up and connectNL
3.Push the water drain hose onto
the connection as far as it will go.
Connection types for water drainage
NB!
If the drain is clogged or closed,
accumulated waste water can flow
back into the unit.
▶Before using the device, ensure
that the waste water flows away
quickly and remove any blockages.
Drain into a
siphon.
The connection position
tie with a
hose clamp
(12-22 mm) bore
gene.
The water drainage
feeding tube with
a hose guide
thing at minimum
80 cm and maxi
times 100 cm
height fixing
gene.
4.Place the water drain hose in the
hose guide.
Remark:Of
the Y-divider
→ Page 29
you can remove the
water drain hose from
an additional device
comb such as
a washing machine
on the same note
connect the
siphon's feed.
Make sure that the water
drain hose is not kinked.
5.Connect the device to the water
drain.
→ "Water drainage connection
types", page 15
Tip:To collect the condensation water
again in the condensation water
container (e.g. when changing the
location of the device), reverse these
steps in reverse order.
Drain in one
sink.
The water drainage
feeding hose com-
cracked through the
slide and with
the confirmation
fastening material
at.
Up the bend
maximum 100
cm height be-
settle.
2
1
15

NLSet up and connect
Drain in one
ditch.
The water drainage
feeding hose com-
cracked through the
slide and with
the confirmation
fastening material
at.
The bend at the
attach gutter.
4.5 Adjusting the device
To reduce noise and vibration, place
the device horizontally.
▶To adjust the device, turn the device
feet. Check the horizontal
adjustment of the device with a
spirit level.
All device feet must be firmly on the
ground.
4.6 Connect the device
electrically
1.Plug the power plug of the
device's power cord into a power
socket near the device.
The connection data of the device can
be found in the technical data
data → Page 48 .
2.The mains plug on v
to learn.
astity control
16

Get to know your deviceNL
5 Get to know your device
5.1 Device
Here you will find an overview of the components of your device.
6
5
4
3
2
1
Depending on the device type, details in the image may differ,
e.g. the color and the shape.
an
1Air intake 4Door
2Bottom service flap
munit → Page 36
5Condensation water tank
→ Page 34
3Fluff filter →
Page 31
6Control panel
→ Page 18
17

NLGet to know your device
5.2 Control panel
You can use the control panel to set all functions of your device and obtain
information about its operating status.
2 3 4
1 1
4
1Programs →
Page 26
2Program selector
→ Page 30
3Display →
Page 19
Buttons → Page 22
4
18

DisplayNL
6 Display
The display shows the current setting values, selection options or information
texts.
Example display indication
Indication
0:401
Designation Description
Program duration /
remaining time of
the program
Approximate expected program duration
or time remaining in the program.
1:25
8.0kg1
0:451
Time program Time program is set.
→ "Time programs", page 27
Recommended load Maximum load amount for the
set program in kg.
Ready in time
Child lock
→ "Buttons", page 24
¡lights up: the child lock is activated. ¡
flashes: the child lock is activated
and the device was operated.
→ "Deactivate child lock", page 35
(
Pause)
Start/ Start / Pause Start, cancel or pause
¡lights up: the program is running and can
smoking or paused.
program can be
barrel.
are depicted
¡flashes: it
started or restarted
(Iron
dry)
Drying target ironing
dry
The drying purpose is
→ "Buttons", Pa
activated.
Gina 23
1Example
19

NLDisplay
Indication Designation Description
(Closet-
dry)
Drying purpose cupboard -
dry
The drying target is activated.
→ "Buttons", page 23
(Cupboard dry
Plus)
Drying purpose cupboard -
dry Plus
The drying target is activated.
→ "Buttons", page 22
+1
+2
+3
Drying target
suits
The custom drying target is activated.
→ "Buttons", page 22
→ "Buttons", page 23
→ "Buttons", page 23
(Anti wrinkle) Anti-crease function The anti-crease function is activated.
→ "Buttons", page 23
(Low temp-
perature)
Dry gently Gentle drying for sensitive textiles is
activated.
→ "Buttons", page 24
4 kg (Hall-
ve load)
Half load
quantity
The half load quantity is activated.
→ "Buttons", page 24
(Signal Silent drying Silent drying without acoustic signals is
activated.
→ "Buttons", page 24
out)
Condensation water re-
reservoir
Empty the condensation water container
→ Page 34 .
Slide in the condensation water container
→ Page 35 .
Fluff filter Clean the fluff filter →
Page 31 .
Filter system from
the soil unit
Clean the filter system of the bottom unit
→ Page 33 .
Hot Cooling process The laundry is cooled while the drum is
rotating to avoid damage to the laundry.
The process can be stopped by opening the
door.
Remark:Do not change the program.
Program status
Program status
To dry
Drying target ironing
dry
Drying purpose cupboard -
dry
Program status
Anti wrinkle Program status
1Example
20