Bosch GTA 600 Professional Operation instructions

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
1 609 929 X94 (2011.01) PS / 95 UNI
GTA 600 Professional
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководст-
во по эксплуатации
uk Оригінальна інструкція з
експлуатації
ro Instrucţiuni originale
bg Оригинална инструкция
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
fa
ΕΎϤϴϠόΗϞϴϐθΘϟ΍ΔϴϠλϷ΍
Ϡλ΍ έΎ ίήσ ΎϤϨϫ΍έ
OBJ_BUCH-1382-001.book Page 1 Thursday, January 13, 2011 9:15 AM

| 3
Bosch Power Tools 1 609 929 X94 | (13.1.11)
GTA 600
Professional
3
2
4
1
OBJ_BUCH-1382-001.book Page 3 Thursday, January 13, 2011 9:15 AM

1 609 929 X94 | (13.1.11) Bosch Power Tools
4|
A2
A1
1
3
5
4
OBJ_BUCH-1382-001.book Page 4 Thursday, January 13, 2011 9:15 AM

| 5
Bosch Power Tools 1 609 929 X94 | (13.1.11)
C3C2C1
B3B2
B1
1
7
2
GTS 10 J
Professional
2
6
1
2
OBJ_BUCH-1382-001.book Page 5 Thursday, January 13, 2011 9:15 AM

English | 9
Bosch Power Tools 1 609 929 X94 | (13.1.11)
en
Safety Notes
General Safety Rules
Read all warning notes and instruc-
tions enclosed with the saw stand
and the power tool to be mounted.
Failure to follow the warnings and in-
structions may result in electric
shock, fire and/or serious injury.
Safety Warnings for Saw Stands
fPull the plug from the mains receptacle
and/or remove the battery from the power
tool before making adjustments on the tool
or changing tool accessories. Unintentional
switching on of the power tool is the cause of
many accidents.
fAssemble the saw stand in the proper man-
ner before mounting the power tool. Proper
assembly is important to prevent the risk of
a collapse of the saw stand.
fAttach the power tool securely to the saw
stand before using it. Slipping off of the
power tool on the saw stand can lead to loss
of control.
fPlace the saw stand on a firm, level and hor-
izontal surface. If the saw stand can slip off
or wobble, the workpiece cannot be uniform-
ly and securely guided.
fDo not overload the saw stand and do not
use it as a ladder or scaffolding. Overload-
ing or standing on the saw stand can lead to
the upward shifting of the centre of gravity of
the stand and its tipping over.
fDo not ram the workpiece with force into
the saw blade. When too much force is ap-
plied when using the power tool, the saw
stand can be tipped over.
fWhen working, take care that all bolts and
connecting elements are firmly tightened.
Loose connections can lead to instability and
inexact sawing.
fEnsure that long and heavy workpieces do
not affect the equilibrium of the saw stand.
Long and/or heavy workpieces must be sup-
ported at the free end.
fKeep your fingers clear of the hinge points
while pushing the saw stand together or
pulling it apart. Danger of fingers being
crushed or contused.
Symbols
The following symbols can be important for the
operation of your saw stand. Please memorise
the symbols and their meanings. The correct in-
terpretation of the symbols helps you operate
the saw stand better and more secure.
Product Description and
Specifications
Intended Use
The saw stand is intended to accommodate the
following stationary saws from Bosch (as of
2011.01):
Together with the power tool, the saw stand is
intended for the cutting to length of boards and
profiles.
Technical Data
Symbol Meaning
The maximum carrying capacity
(power tool + workpiece) of the
saw stand is 60 kg.
– GTS 10 J Professional 3 601 M30 5..
Saw stand GTA 600
Professional
Article number 3 601 M22 001
Dimensions of base
frame mm 450 x 520
Height of saw stand mm 602
Max. carrying capacity
(power tool + work-
piece) kg 60
Weight, approx. kg 6.3
OBJ_BUCH-1382-001.book Page 9 Thursday, January 13, 2011 9:15 AM

10 | English
1 609 929 X94 | (13.1.11) Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the saw stand on the graphics
pages.
1Tension latch
2Retaining clamp
3Base frame
4Saw stand leg
5Fastening kit
6Housing frame (GTS 10 J Professional)
7Strike (GTS 10 J Professional)
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Assembly
Delivery Scope
Please also observe the represen-
tation of the delivery scope at the
beginning of the operating instruc-
tions.
Before assembling the saw stand, check if all
parts listed below are provided:
– Base frame 3
– Saw stand legs 4(4 pcs.)
– Fastening kit 5consisting of:
Phillips screws M8 x 45 (4 pcs.),
Lock nuts M8 (4 pcs.)
Additionally required tools (not in delivery
scope):
– Phillips screwdriver
– Open-end spanner (13 mm)
Assembling the Saw Stand
(see figures A1 –A2)
– Carefully remove all parts included in the de-
livery from their packaging.
– Remove all packaging material.
– Undo tension latch 1and pull the base frame
3apart.
– Insert the saw stand legs 4into the square
tubing of base frame 3until the mounting
holes are aligned.
The saw stand legs must face outward.
– Screw the saw stand legs and the base frame
together with the screws and nuts of fasten-
ing kit 5.
Fastening the Power Tool
(see figures B1–B3)
– Tilt both retaining clamps 2upward.
– Slide the rear housing frame 6of the power
tool completely into the retaining clamps 2.
– Centre the power tool on the base frame.
– Hang the clip of tension latch 1over strike 7
and fold down the latch to lock the power
tool in place.
Operation
Working Advice
Do not overload the saw stand. Always observe
the maximum carrying capacity of the saw
stand.
Always hold the workpiece firmly, especially the
longer and more heavy section. After cutting
through the workpiece, the centre of gravity
may become dislocated in such an unfavourable
manner that the saw stand tips over.
Transport (see figures C1–C3)
fWhen folding the saw stand together or
apart, the power tool may not be mounted
to the saw stand.
The saw stand can be folded together for trans-
port.
– Remove the power tool.
– Fold both retaining clamps 2down.
– Fold the saw stand together.
– Hang the clip of tension latch 1over the oth-
er side of base frame 3and fold down the
latch to lock the saw stand.
OBJ_BUCH-1382-001.book Page 10 Thursday, January 13, 2011 9:15 AM

English | 11
Bosch Power Tools 1 609 929 X94 | (13.1.11)
Maintenance and Service
Maintenance and Cleaning
If the saw stand should fail despite the care tak-
en in manufacture and testing, repair should be
carried out by an authorised customer services
agent for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the saw
stand.
Disposal
The saw stand, accessories and packaging
should be sorted for environmental-friendly re-
cycling.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under: www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: [phone]
Fax: [phone]
E-Mail: [email protected]m
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: [phone]
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
Subject to change without notice.
OBJ_BUCH-1382-001.book Page 11 Thursday, January 13, 2011 9:15 AM