Bosch DINION 4000 AN User guide

Camera Menus
DINION 4000 AN
en Quick Operation Guide

Analog Camera Menus Setup menu | en 3
Bosch Security Systems Quick Operation Manual AM18-Q0636 | v1.0 | 2013.09
1Setupmenu
Press the center button of the control pad to access the SETUP
menu.
– Press the up or down buttons to move the cursor through
the menus.
– Press the right or left buttons to change values.
– When the symbol is shown, press the center button to
select an item or open a submenu.
Navigation items at the bottom of the screen
– To move to the continuation of a menu, select NEXT.
– To return to the previous menu, select BACK or RETURN.
– To save changes, select SAVE ALL.
– To close the SETUP menu, select EXIT.
Menu
Set

4en | Setup menu Analog Camera Menus
AM18-Q0636 | v1.0 | 2013.09 Quick Operation Manual Bosch Security Systems
1.1 Main menu
1.1.1 Lens menu
LENS Iris setting
SHUTTER/AGC Auto and manual exposure control
WHITE BAL White balance setting
BACKLIGHT Backlight compensation setting
PICT ADJUST Image adjustment setting
DYN Dynamic range setting
MOTION DET Video motion detection setting
PRIVACY Privacy masking setting
DAY/NIGHT Day/Night setting
DNR Digital noise reduction
CAMERA ID Camera identification
SYNC Synchronization mode setting
LANGUAGE Language setting
CAMERA RESET Restores all factory default values
SAVE ALL Saves all settings
LENS MANUAL
AUTO TYPE DC
MODE OPEN, CLOSE, AUTO
SPEED 0 - 255
RETURN

Analog Camera Menus Setup menu | en 5
Bosch Security Systems Quick Operation Manual AM18-Q0636 | v1.0 | 2013.09
1.1.2 Shutter/AGC (Automatic Gain Control) menu
SHUTTER/AGC AUTO HIGH LUMINANCE
MODE SHUT+AUTO IRIS, AUTO
IRIS
BRIGHTNESS 0 - 255
RETURN
LOW LUMINANCE
MODE AGC, OFF
BRIGHTNESS x0.25, x0.5, x0.75, x1.0
RETURN
MANUAL MODE SHUT+AGC
SHUTTER 1/60, 1/120, 1/250, 1/500,
1/1000, /2000, 1/4000,
1/10000 (NTSC)
1/50, 1/100, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/10000 (PAL)
AGC 6, 12, 18, 24, 30, 36, 42,
44.8
RETURN

6en | Setup menu Analog Camera Menus
AM18-Q0636 | v1.0 | 2013.09 Quick Operation Manual Bosch Security Systems
1.1.3 White balance menu
– ATW (Auto Tracking White balance) and PUSH (Full pull-in:
1,800 K to 10,500 K) continuously analyze color
temperature.
– Use ANTI CR (Anti Color Rolling) when certain types of
fluorescent light cause the picture to periodically change
color.
– Use PUSH LOCK with a reference white object filling the
screen.
WHITE BAL ATW SPEED 0 - 255
DELAY CNT 0 - 255
ATW FRAME x0.5, x1.0, x1.5, x2.0
ENVIRONMENT INDOOR, OUTDOOR
RETURN
PUSH
USER1 B-GAIN 0 - 255
R-GAIN 0 - 255
RETURN
USER2 B-GAIN 0 - 255
R-GAIN 0 - 255
RETURN
ANTI CR
MANUAL LEVEL 0 - 255
RETURN
PUSH
LOCK

Analog Camera Menus Setup menu | en 7
Bosch Security Systems Quick Operation Manual AM18-Q0636 | v1.0 | 2013.09
1.1.4 Backlight menu
– Use BLC (Back Light Compensation) to see a dark object in
front of a bright background.
– Use HLC (High Light Compensation) to darken highlights
and avoid image wash-out (for example, car headlights).
1.1.5 Picture adjust menu
1.1.6 Dynamic range setting menu
– Use DYN (Dynamic range setting) to improve dynamic
range by highlight compression and contrast
enhancement.
BACKLIGHT OFF
BLC
HLC
PICT ADJUST MIRROR ON, OFF
BRIGHTNESS 0 - 255
CONTRAST 0 - 255
SHARPNESS 0 - 255
HUE 0 - 255
GAIN 0- 255
RETURN
DYN OFF
ON LUMINANCE LOW, MID, HIGH
CONTRAST LOW, MIDLOW, MID,
MIDHIGH, HIGH
RETURN

8en | Setup menu Analog Camera Menus
AM18-Q0636 | v1.0 | 2013.09 Quick Operation Manual Bosch Security Systems
1.1.7 Motion detection menu
– The ENABLE function sets the regions/blocks where
motion detection does not work.
– To exit the BLOCK DISP ENABLE function, press straight
down on the set button for a longer time.
1.1.8 Privacy masking menu
– Only 4 areas are available if MONITOR AREA of motion
detection is on.
MOTION DET OFF
ON DETECT SENSE 0 - 127
BLOCK DISP OFF, ON, ENABLE
MONITOR AREA OFF, ON
AREA SEL 1 - 4
TOP 0 - 244 (NTSC), 288 (PAL)
BOTTOM 0 - 244 (NTSC), 288 (PAL)
LEFT 0 - 474 (NTSC), 468 (PAL)
RIGHT 0 - 474 (NTSC), 468 (PAL)
RETURN
PRIVACY OFF
ON AREA SEL 1 - 8
TOP 0 - 244 (NTSC), 288 (PAL)
BOTTOM 0 - 244 (NTSC), 288 (PAL)
LEFT 0 - 474 (NTSC), 468 (PAL)
RIGHT 0 - 474 (NTSC), 468 (PAL)
COLOR 1 - 8
TRANSP 0.00, 0.50, 0.75, 1.00
MOSAIC OFF, ON
RETURN

Analog Camera Menus Setup menu | en 9
Bosch Security Systems Quick Operation Manual AM18-Q0636 | v1.0 | 2013.09
Area selection for motion or privacy masks
Select area 1, 2, 3 or 4 (8).
–Top: extend or reduce upper limit of the detection area.
–Bottom: extend or reduce bottom limit of the detection
area.
–Left: extend or reduce left limit of the detection area.
–Right: extend or reduce right limit of the detection area.
1.1.9 Day/night menu
– When EXT is on the IR cut-off filter is switched by an
external input.
– With EXT1 the camera switches to night mode when alarm-
in is high; with EXT2 the camera switches to night mode
when alarm-in is low.
– The output relay closes when the camera switches to
NIGHT mode.
1
LEFT RIGHT
TOP RIGHT
BOTTOM
1
reduce extend
DAY/NIGHT AUTO BURST OFF, ON
DELAY CNT 0 - 255
DAY->NIGHT 0 - 255
NIGHT->DAY 0 - 255
RETURN
COLOR
B/W BURST OFF, ON
EXT OFF, EXT1, EXT2
RETURN

10 en | Setup menu Analog Camera Menus
AM18-Q0636 | v1.0 | 2013.09 Quick Operation Manual Bosch Security Systems
1.1.10 Digital noise reduction menu
1.1.11 Camera identification menu
When ON is selected, a virtual keyboard appears on the screen.
Use the control pad to move to the character you want and
select it. Repeat this to enter the camera ID you desire. You can
enter up to 52 characters.
1.1.12 Synchronization menu
Line-Lock (LL) is only available for cameras with a VAC power
supply.
360° = 524 (NTSC), 624 (PAL).
1.1.13 Language menu
DNR DNR MODE OFF, Y, C, Y/C
Y LEVEL 0 - 15
C LEVEL 0 - 15
RETURN
CAMERA ID OFF
ON
RETURN
SYNC. INT
LL PHASE 0 - 524 (NTSC), 624 (PAL)
RETURN
LANGUAGE ENGLISH, JAPANESE, GERMAN, FRENCH, RUSSIAN,
PORTUGUESE, SPANISH, SIMPLIFIED CHINESE