Bosch NBN-80122 User manual

DINION IP ultra 8000 MP
NBN-80122
en Installation Manual

Table of contents
1Safety 5
1.1 Safety message explanation 5
1.2 Safety precautions 5
1.3 Important safety instructions 6
1.4 FCC and ICES compliance 7
1.5 Notices 8
2Short information 9
3System overview 10
3.1 Performance 10
3.2 Lens options 10
3.3 Application variants 11
3.4 Using the camera 11
3.5 Operation with external systems 11
4Planning 13
4.1 Unpacking 13
4.2 Contents 13
4.3 System requirements 14
5Installation 15
5.1 Lens mounting 15
5.2 Mounting the camera 16
5.3 Local storage 17
6Connection 18
6.1 Network (and PoE power) 18
6.2 Auxiliary power 19
6.3 Alarm 20
6.4 Audio 22
6.5 Video monitor 23
6.6 Data 24
7Configuration 25
7.1 Setting up the camera 25
7.2 Local set-up 25
7.2.1 Field of view 26
7.2.2 Iris value 26
DINION IP ultra 8000 MP Table of Contents | en 3
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688

7.2.3 Application variant 26
7.2.4 Focus 26
7.3 Configuration via web browser 27
7.3.1 Set-up via web browser 28
7.4 True Day/Night switching 29
8Troubleshooting 30
8.1 LED error status 30
8.2 Resolving problems 30
8.3 Testing the network connection 34
8.4 Customer service 34
8.5 Terminal program 35
9Maintenance 37
9.1 Cleaning 37
9.2 Repair 37
9.3 Reset 38
10 Decommissioning 39
10.1 Transfer 39
10.2 Disposal 39
11 Technical data 40
11.1 Specifications 40
11.2 Dimensions 49
4en | Table of Contents DINION IP ultra 8000 MP
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems

Safety
Safety message explanation
!
Caution!
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Notice!
Indicates a situation which, if not avoided, could result in
damage to the equipment or environment, or data loss.
Safety precautions
!
Caution!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
!
Caution!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
(NEC 800 CEC Section 60) or applicable local codes.
!
Caution!
Use only a +12 VDC power supply as an auxiliary power source.
The auxiliary power supply unit must be isolated from earth.
1
1.1
1.2
DINION IP ultra 8000 MP Safety | en 5
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688

Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Follow all warnings before operating the
unit.
1. Clean only with a dry cloth. Do not use liquid cleaners or
aerosol cleaners.
2. Do not install unit near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.
3. Never spill liquid of any kind on the unit.
4. Take precautions to protect the unit from power and
lightning surges.
5. Adjust only those controls specified in the operating
instructions.
6. Operate the unit only from the type of power source
indicated on the label.
7. Unless qualified, do not attempt to service a damaged unit
yourself. Refer all servicing to qualified service personnel.
8. Install in accordance with the manufacturer's instructions in
accordance with applicable local codes.
9. Use only attachments/accessories specified by the
manufacturer.
1.3
6en | Safety DINION IP ultra 8000 MP
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems

FCC and ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the
dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office, Washington,
DC 20402, Stock No. 004-000-00345-4.
1.4
DINION IP ultra 8000 MP Safety | en 7
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688

Notices
Notice!
Optical elements are sensitive and should be protected at all
times. Do not allow objects to come into contact with glass
surfaces and do not touch optical elements with your fingers.
Notice!
Video loss is inherent to digital video recording; therefore,
Bosch Security Systems cannot be held liable for any damage
that results from missing video information.
To minimize the risk of losing information, we recommend
multiple, redundant recording systems, and a procedure to
back up all analog and digital information.
Notice!
We recommend that memory cards only be used for local
storage of alarm recordings.
1.5
8en | Safety DINION IP ultra 8000 MP
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems

Short information
This manual has been compiled with great care and the
information it contains has been thoroughly verified. The text
was correct at the time of printing, however, the content can
change without notice. Bosch Security Systems accepts no
liability for damage resulting directly or indirectly from faults,
incompleteness or discrepancies between this manual and the
product described.
Trademarks
All hardware and software product names used in this document
are likely to be registered trademarks and must be treated
accordingly.
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
http://www.boschsecurity.com/catalog_overview.htm
2
DINION IP ultra 8000 MP Short information | en 9
Bosch Security Systems 2015.04 | v2.0 | AM18-Q0688

System overview
Performance
The DINION IP ultra 8000 MP with 12 megapixel resolution
offers crisp, clear and extremely detailed images for the most
demanding IP video surveillance requirements. It captures 12
megapixel at 20 fps, and 4K UHD at 30 fps, so providing images
of fast moving objects in high resolutions. The content-rich
image allows effective retrospective analysis at the level of
detail that makes the difference when collecting forensic
evidence.
The camera offers a wide-angle overview and multiple focus
points on a single screen so now you can focus on details
without losing the bigger picture.
This IP camera operates as a network video server to transmit
video and control signals over Ethernet LANs and the Internet.
The integrated encoder uses H.264 compression technology to
give clear images while reducing bandwidth and storage
requirements.
Lens options
Versions
The camera is available in the following versions:
– Camera body with permanently attached 5 mm lens.
– Camera body with permanently attached 3.2 mm lens.
– Camera body with C/CS lens mount and motorized focus
adjustment.
Three telephoto lenses (75 mm, 50 mm and 35 mm), specifically
matched to the camera body, are optionally available.
3
3.1
3.2
10 en | System overview DINION IP ultra 8000 MP
2015.04 | v2.0 | AM18-Q0688 Bosch Security Systems