Bosch LB6-100S-D User manual

Compact Sound Speaker System
LB6-100S-D, LB6-100S-L, LB6-S-D, LB6-S-L, LB6-SW100-D, LB6-SW100-L, LC6-100S-
L, LC6-S-L, and LC6-SW100-L
en Installation Manual

Table of contents
1Safety 4
2Introduction 6
2.1 System features 6
3System overview 7
3.1 Packing lists 7
3.2 Product information 11
3.3 Dimensions 13
4Installation 15
4.1 Ceiling mount speakers 15
4.1.1 Ceiling mount satellite speaker installation 15
4.1.2 Ceiling mount subwoofer installation 18
4.2 Surface mount speakers 22
4.2.1 Surface mount satellite speaker installation 22
4.2.2 Wall bracket range of motion 23
4.2.3 Surface mount subwoofer installation 23
4.2.4 Removing a subwoofer from the wall 25
5Wiring 26
5.1 Ceiling mount speakers 26
5.1.1 Wattage tap 26
5.1.2 70v/100v/4 ohm Mono 27
5.2 Surface mount speakers 28
5.2.1 Wattage tap 28
5.2.2 70v/100v/4 ohm Mono 29
5.2.3 8 ohm Stereo Surface Mount Subwoofers Only 30
6Troubleshooting 31
7Technical data 32
7.1 Ceiling mount speakers 32
7.1.1 Frequency response 32
7.2 Surface mount speakers 33
7.2.1 Frequency response 33
Compact Sound Speaker System Table of Contents | en 3
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

Safety
!
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Bosch strongly recommends all loudspeakers be suspended taking into account all
current national, federal, state, and local laws and regulations. It is the responsibility of the
installer to ensure all loudspeakers are safely installed in accordance with all such
requirements. When loudspeakers are suspended, Bosch strongly recommends the system be
inspected at least once per year or as laws and regulations require. If any sign of weakness or
damage is detected, remedial action should be taken immediately. The user is responsible for
making sure the wall, ceiling, or structure is capable of supporting all objects suspended
overhead. Any hardware used to suspend a loudspeaker not associated with Bosch is the
responsibility of others.
Surface mount speakers
Safety Agency Compliance
The LB6-S-D and LB6-SW100-D bracket systems have successfully passed EIA-636 at a safety
factor of 8:1. The bracket systems are intended to support only the LB6-S-D and LB6-SW100-D
respectively. Do not use either bracket system for any other purpose. Never set anything on or
hang anything from the LB6-S-D or LB6-SW100-D enclosures when using the brackets.
Redundant safety point
As an added safety measure, it is suggested the user install an extra suspension point back to
the building structural supports. This redundant safety point should have as little slack as
possible (less than 1-inch is preferable).
Figure 1.1: Surface mount satellite speaker (left) and surface mount subwoofer (right) with safety cable
Ceiling mount speakers
!
Caution!
The seismic tab (auxiliary support ring) is not intended for primary suspension of the
loudspeaker. The seismic tab should only be used as a secondary safety point.
1
4en | Safety Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

!
Caution!
Ceiling mount speaker’s safety cable
The safety cable should be installed with a minimum of 3-inches (76.2 mm) of slack.
Old electrical and electronic appliances
Electrical or electronic devices that are no longer serviceable must be collected separately and
sent for environmentally compatible recycling (in accordance with the European Waste
Electrical and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should use the return and collection
systems put in place in the country concerned.
Compact Sound Speaker System Safety | en 5
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

Introduction
The Compact Sound Speaker System is a very compact full-range loudspeaker ideal for
applications requiring high-quality sound. Its shape flexibility and size make it nearly invisible
for use in background/foreground music systems for restaurants, bars, patios, retail, and other
applications. The system consists of a high performance 8-inch subwoofer module with a
crossover network to support the included four (4) 2-inch satellite speakers. The system
provides for easy signal connections at the subwoofer and can support either 4/8 ohm or
70/100v signal connections. Its high power handling allows the system to be used in a wide
variety of environments and spaces to provide high quality background or foreground music.
Read through this manual to familiarize yourself with the safety information, features, and
applications before you use these products.
System features
Common system features:
– Available as a complete pre-packaged systems in either Ceiling mount or Surface mount
configurations.
– Components can be combined in any mix of 4 satellite speakers to a single subwoofer to
meet décor or installation requirements.
– Supports up to 100 W, 70/100 V, and 8 ohm audio connections.
Ceiling version features:
– Quick-install design with captive mounting tabs to fit nearly any ceiling construction.
– Four-pin Phoenix connectors on ceiling satellite speakers support pass-thru wiring.
– UL 2043/1480 ratings allow for use in signaling applications and plenum air spaces.
– Ceiling cutout templates and all mounting accessories included.
– Available in white finish.
Surface-mount version features:
– Simplified mounting design for satellites—concept provides secure mounting while
allowing for significant articulation and range of motion.
– Attractive subwoofer design with full-face grille—install it anywhere, no need to hide!
– Supports stereo operation with 8-ohm audio connections.
– Quick-mount slide-on wall bracket included.
– Available in black or white finishes.
2
2.1
6en | Introduction Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

System overview
Packing lists
Ceiling mount speakers
The LC6-100S-L speaker system package contains four (4) satellite speakers and one (1)
subwoofer. When you open the box for the full system you will find three (3) main boxes
inside; two (2) boxes for the satellite speakers and one (1) box for the subwoofer.
The major components included in one (1) box for the LC6-S-L ceiling mount satellite speaker.
Item Quantity Description
A 2 LC6-S-L ceiling mount satellite speakers
B 2 Grilles
C 2 C-ring supports
D 1 Cutout template
E 1 Engineering data sheet
F 2 Paint shields
Table 3.1: Ceiling Mount Satellite Speaker
3
3.1
Compact Sound Speaker System System overview | en 7
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

The major components included in the box for the LC6-SW100-L ceiling mount subwoofer:
Item Quantity Description
A 1 LC6-SW100-L ceiling mount subwoofer
B 2 Tile rails
C 1 C-ring support
D 1 Grille
E 1 Installation manual
F 2 screws
G 1 Cutout template
H 1 Paint shield
Table 3.2: Ceiling Mount Subwoofer
8en | System overview Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

Surface mount speakers
The LB6-100S-D speaker system package contains four (4) satellite speakers and one (1)
subwoofer. When you open the box for the full system you will find three (3) main boxes
inside; two (2) boxes for the satellite speakers and one (1) box for the subwoofer.
The major components included in one (1) box for the LB6-S-D surface mount satellite
speaker.
Item Quantity Description
A 2 LB6-S-D surface mount satellite speakers
B 2 Wall brackets
C 2 Speaker brackets
D 1 Engineering Data Sheet
E 2 M6 hex drive pan-head screws
F 4 M5 pan-head screws
G 2 Screw sockets
H 1 Hex wrench
Table 3.3: Surface Mount Satellite Speaker (1 box)
Compact Sound Speaker System System overview | en 9
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

The major components included in the box for the LB6-SW100-D surface mount subwoofer:
Item Quantity Description
A 1 LB6-SW100-D surface mount subwoofer
B 1 Wall bracket, assembled in box
C 1 Installation Manual
D 4 M6 hex drive pan-head screw
E 4 Rubber feet
F 1 Hex wrench
Table 3.4: Surface Mount Subwoofer
10 en | System overview Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

Product information
Ceiling mount speakers
Figure 3.1: LC6-S-L Product Information
Figure 3.2: LC6-SW100-L Product Information
3.2
Compact Sound Speaker System System overview | en 11
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

Surface mount speakers
Figure 3.3: LB6-S-D Product Information
Figure 3.4: LB6-SW100-D Product Information
12 en | System overview Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

Dimensions
Ceiling speakers
Figure 3.5: Dimensions LC6-S-L
Figure 3.6: Dimensions LC6-SW100-L
3.3
Compact Sound Speaker System System overview | en 13
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

Surface mount speakers
Figure 3.7: Dimensions LB6-S-D and Mounting Bracket
Figure 3.8: Dimensions LB6-SW100-Dand Mounting Bracket
Notice!
The mounting bracket dimension drawings are not to scale. Drawing sizes increased for
readability.
14 en | System overview Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

Installation
Ceiling mount speakers
Ceiling mount satellite speaker installation
For safety, ensure the ceiling tiles or building structure supports more than the weight of the
speaker. Consult an expert if you are unsure.
Installing a ceiling mount satellite speaker
To install a ceiling mount satellite speaker, do the following:
1. Trace the cutout template.
2. Cut the hole.
3. Install the C-Ring.
4
4.1
4.1.1
Compact Sound Speaker System Installation | en 15
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

4. Install wire conduit into the speaker.
5. Install wires into the Phoenix connector.
6. Tighten the two (2) screws to secure the conduit clamp.
7. Attach the safety cable.
The safety cable should be installed with a minimum of a 3-inch (76.2 mm) slack.
16 en | Installation Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

8. Push the speaker up into the ceiling.
9. Tighten the mounting tabs.
10. Attach the grille.
11. Installation complete.
For more information, see Safety, page 4.
Compact Sound Speaker System Installation | en 17
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

Ceiling mount subwoofer installation
For safety, ensure the ceiling tiles or building structure supports more than the weight of the
speaker. Consult an expert if you are unsure.
Installing a ceiling mount subwoofer
To install a ceiling mount subwoofer, do the following:
1. Trace the cutout template.
2. Cut the hole.
3. Secure rails to the C-Ring.
4.1.2
18 en | Installation Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.

4. Attach the safety cable to the auxiliary support tab.
5. Route wires through the ceiling to the conduit clamp.
6. Connect the wires to the Phoenix connectors.
Compact Sound Speaker System Installation | en 19
Bosch Security Systems B.V. Installation Manual 2015.12 | 07 |

7. Plug the phoenix connector into the socket.
8. Tighten the two (2) screws to secure the conduit clamp.
9. Push the speaker up into the ceiling.
20 en | Installation Compact Sound Speaker System
2015.12 | 07 | Installation Manual Bosch Security Systems B.V.