Bose VIRTUALLY INVISIBLE 300 User manual

OWNER’S GUIDE • BRUGERVEJLEDNING
BEDIENUNGSANLEITUNG • GEBRUIKERSHANDLEIDING
GUÍA DEL USUARIO • KÄYTTÖOHJE • NOTICE D’UTILISATION
MANUALE DI ISTRUZIONI • KEZELÉSI ÚTMUTATÓ
BRUKERVEILEDNING • PODRĘCZNIK UŻYTKOWNIKA
MANUAL DO PROPRIETÁRIO • BRUKSANVISNING
VIRTUALLY
INVISIBLE®300
WIRELESS SURROUND SPEAKERS

2 - ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Please read and keep all safety and use instructions
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
This symbol means there is uninsulated, dangerous voltage within the product enclosure that may constitute a
risk of electrical shock.
This symbol means there are important operating and maintenance instructions in this guide.
This product contains magnetic material. Consult your physician on whether this might aect your implantable
medical device.
• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
• Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or
near the product.
• Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or
near the product.
• Do NOT make unauthorized alterations to this product.
• Do NOT use a power inverter with this product.
• Do NOT use in vehicles or boats.
• The speaker wire and interconnect cables included with this system are not approved for in-wall installation. Please
check your local building codes for the correct type of wire and cable required for in-wall installation.
• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
仅适用于 2000m 以下地区安全使用
Use at altitude less than 2000 meters only.
• Due to ventilation requirements, Bose does not recommend placing the product in a confined space such as in a wall
cavity or in an enclosed cabinet.The product label is located on the bottom of the product.

ENGLISH - 3
REGULATORY INFORMATION
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. This
equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device is for indoor use only to reduce the potential for harmful interference to other co-channel systems.
W52 for Indoor Use Only
Receiver Category = 2
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC and all other EU directive requirements. The complete declaration of
conformity can be found at: www.Bose.com/compliance
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “6” is 2006 or 2016.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Bose Corporation is under license.
SoundTouch and the wireless note design are registered trademarks of Bose Corporation in the U.S. and other countries.
©2016 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior
written permission.

4 - ENGLISH
CONTENTS
Getting Started
Building your entertainment system ......................................................................... 5
Unpacking............................................................................................................................ 5
Placement guidelines ...................................................................................................... 6
Mounting the speakers ........................................................................................... 7
Setting Up the Speakers
Connecting the adapters ............................................................................................... 8
Identifying switch settings on wireless receivers ................................................. 9
Connecting the speakers ............................................................................................... 9
Connecting to power....................................................................................................... 10
Finishing Setup
Pairing with a SoundTouch® 300 soundbar............................................................ 11
Checking for sound.......................................................................................................... 12
About ADAPTiQ® audio calibration............................................................................ 12
Running ADAPTiQ® audio calibration ............................................................... 12
Getting System Information
System status indicators ................................................................................................ 14
Cleaning................................................................................................................................ 15
Customer service .............................................................................................................. 15
Limited warranty information ...................................................................................... 15
Technical information ...................................................................................................... 15
SERVICE connector.......................................................................................................... 16
Troubleshooting
Common solutions............................................................................................................ 17
Unable to complete ADAPTiQ® audio calibration................................................. 19

ENGLISH - 5
Building your entertainment system
The Virtually Invisible® 300 wireless rear speakers are part of a modular home
entertainment system, and are compatible with the SoundTouch® 300 soundbar and
Acoustimass® 300 wireless bass module (not provided). You can wirelessly pair the bass
module and surround speakers at any time for an even richer, more immersive sound.
To purchase these systems, contact your local Bose® dealer or visit www.bose.com
Unpacking
Carefully unpack the carton and confirm that the following parts are included:
Virtually Invisible® 300 speaker (2) Wireless receiver (2) AC2 adapter (2)
Power cord (2) Two-pin speaker cable (2)
May ship with multiple power cords. Use the power cord for your region.
If any part is damaged, do not use it. Contact your authorized Bose dealer or Bose cus-
tomer service. Refer to the contact sheet in the carton.
GETTING STARTED

6 - ENGLISH
GETTING STARTED
Placement guidelines
To avoid interference, keep other wireless equipment 1 – 3 ft. (0.3 – 0.9 m) away from
the wireless receivers. Place the speakers and wireless receivers outside and away from
metal cabinets, other audio/video components and direct heat sources.
Component Placement recommendation
Rear speakers • Place the speakers on their rubber feet on a stable and level surface.
• Place the speakers at ear height or higher in the back of the room.
• If placing the speakers in an enclosed bookcase shelf, position them at
the front edge of the shelf.
• For a sound that is directed straight at the listener, aim the speakers in
towards the listener.
• For a sound that reflects o the walls to fill the room, aim the speakers
out towards a rear or side wall.
Wireless receivers • Confirm that the switch on one wireless receiver is set to R(right).
• Confirm that the switch on the other wireless receiver is set to L(left).
• Facing the TV, place the speaker and Rwireless receiver on the right
side of the room.
• Facing the TV, place the speaker and Lwireless receiver on the left side
of the room.
• Make sure there is an AC (mains) outlet near each wireless receiver.

ENGLISH - 7
GETTING STARTED
Mounting the speakers
You can mount the speakers on wall brackets, ceiling mounts, floor stands or table
stands. To purchase these accessories, contact your local Bose® dealer or visit www.
bose.com
CAUTION: Only use Bose hardware to mount the speakers. Using unauthorized mounts
may damage your Bose system and its components.

8 - ENGLISH
SETTING UP THE SPEAKERS
Connecting the adapters
1. Using the screwdriver, turn the screws to the left (counterclockwise) to loosen the
wire terminals.
2. Insert the red, stripped end of the two-pin cable marked +into the red +terminal.
3. Insert the black, stripped end of the two-pin cable into the silver –terminal.
Note: Be sure to only insert the stripped and tinned portions of each exposed wire
to avoid clamping the wire’s insulation.
4. Using the screwdriver, turn the screws to the right (clockwise) to secure the wires
into the terminals.
5. Repeat steps 1 – 4 to connect the other adapter.

ENGLISH - 9
Identifying switch settings on wireless
receivers
Your speakers connect to wireless receivers to communicate with the SoundTouch® 300
soundbar. The receivers come preset to a left and right channel out of the box. You can
use the switch on the front of the receiver to adjust the channel settings.
1. Confirm that the switch on one wireless receiver is set to R(right).
2. Confirm that the switch on the other wireless receiver is set to L(left).
Note: Make sure that one wireless receiver is always set to L(left) and the other is set
to R (right).
Connecting the speakers
1. Insert the adapter into the back of your speaker.
2. Insert the other end of the two-pin cable into your wireless receiver.
You hear or feel a click.
3. Repeat steps 1 and 2 to connect your other speaker.
SETTING UP THE SPEAKERS

10 - ENGLISH
SETTING UP THE SPEAKERS
Connecting to power
1. Place your speakers according to the “Placement guidelines” on page 6.
2. Connect one end of the power cord into your wireless receiver.
3. Plug the other end of the power cord into an AC (mains) outlet.
4. Repeat steps 1 – 3 to set up your other speaker.

ENGLISH - 11
FINISHING SETUP
Pairing with a SoundTouch®300 soundbar
To wirelessly pair your rear speakers to a SoundTouch® 300 soundbar, you need to place
the soundbar into pairing mode using the remote control.
1. On the SoundTouch® 300 remote control, press the SoundTouch® button .
2. Press and hold until the connectivity indicator on the soundbar blinks white.
1
2
Once paired, your speakers emit a tone. The LED indicator on the back of the
wireless receiver and the indicator on the soundbar glow white.
Note: If your speakers don’t pair with the soundbar, see “Troubleshooting” on
page 17.

12 - ENGLISH
FINISHING SETUP
Checking for sound
1. Power on your TV.
2. If you are using a cable/satellite box or other secondary source:
• Power on this source.
• If your secondary source is connected to your TV, select the appropriate TV input.
If you have not programmed the SoundTouch® 300 remote control, you may need
to use a dierent remote.
3. Power on the SoundTouch® 300 soundbar.
You hear sound coming from your rear speakers.
Note: If you do not hear sound from the rear speakers, see “Troubleshooting”
on page 17. If you do not hear sound from your soundbar, refer to the
SoundTouch® 300 owner’s guide.
About ADAPTiQ®audio calibration
After connecting your rear speakers to the SoundTouch® 300 soundbar, run ADAPTiQ®
audio calibration for the best acoustic performance. ADAPTiQ customizes the sound of
the system to the acoustics of your listening area by taking five audio measurements. To
run an audio calibration, you need 10 minutes when the room is quiet.
During ADAPTiQ, a microphone on the top of the ADAPTiQ headset (provided with the
SoundTouch® 300 soundbar) measures the sound characteristics of your room to
determine optimal sound quality.
If you no longer have the ADAPTiQ headset, contact Bose® customer service for a
replacement. Refer to the contact sheet in the carton.
Note: If you are also pairing Acoustimass® 300 wireless bass module with the
soundbar, pair the bass before running ADAPTiQ audio calibration. Refer to the
Acoustimass® 300 quick start guide or owner’s guide.
Running ADAPTiQ® audio calibration
1. Put the ADAPTiQ® headset (provided with the SoundTouch® 300) on your head.

ENGLISH - 13
FINISHING SETUP
2. Insert the ADAPTiQ® headset cable into the ADAPTiQ connector on the back of
the soundbar.
3. On the SoundTouch® 300 remote control, press the SoundTouch® button .
4. Press and hold until the TV indicator and the Bluetooth® indicator on the
soundbar glow green.
3
4
The ADAPTiQ process begins.
Note: If you don’t hear your language, press and on the remote’s
navigation pad. To reset the language, press and hold for 10 seconds.
5. Follow the voice prompts until ADAPTiQ process is complete.
If you hear an error message and are unable to complete ADAPTiQ audio
calibration, see page 19.
6. Unplug ADAPTiQ headset from the soundbar and store it in a safe place.
If you later pair the optional bass module, move or mount the system, or move any
furniture, run the ADAPTiQ again to ensure optimal sound quality.

14 - ENGLISH
System status indicators
The front of the wireless receiver has an LED indicator that shows system status.
The LED glows according to system state.
LED Indicator
Indicator activity System state
Blinking amber Ready to pair
Solid white Connected to the soundbar
Solid amber (dim) Disconnected from the soundbar
Blinking white Downloading system software update
Blinking red Firmware error — contact Bose® customer service
GETTING SYSTEM INFORMATION

ENGLISH - 15
CARE AND MAINTENANCE
Cleaning
• Clean the exterior of the rear speakers with a soft, dry cloth.
• Do not use any sprays near the rear speakers. Do not use any solvents, chemicals or
cleaning solutions containing alcohol, ammonia or abrasives.
• Do not allow liquids to spill or objects to drop into any openings.
Customer service
For additional help using the rear speakers:
• Visit global.Bose.com/Support/VI300
• Contact Bose® customer service. Refer to the contact sheet in the carton.
Limited warranty information
Your system is covered by a limited warranty. Details of the limited warranty are
provided on the warranty card in the carton. Please refer to the warranty card for
instructions on how to register. Failure to register will not aect your limited
warranty rights.
The warranty information provided with this product does not apply in
Australia and New Zealand. See our website at www.bose.com.au/warranty or
www.bose.com.nz/warranty for details of the Australia and New Zealand warranty.
Technical information
Input power rating: 100 – 240V 50/60Hz 30W

16 - ENGLISH
CARE AND MAINTENANCE
SERVICE connector
The SERVICE connector is for service use only. Do not insert any cables into
this connector.

ENGLISH - 17
If you experience problems with your rear speakers do the following:
• Unplug the power cords for the wireless receivers, wait 15 seconds and plug them
firmly into a live AC (mains) outlet.
• Secure all cables.
• Check the state of system status indicators (see page 14).
• Move the speakers and wireless receivers away from possible interference
(wireless routers, cordless phones, televisions, microwaves, etc.).
• Place wireless receivers and rear speakers according to the placement
guidelines (see page 6).
If you could not resolve your issue, see the table below to identify symptoms
and solutions to common problems. If you are unable to resolve your issue, contact
Bose® customer service.
Common solutions
The following table lists symptoms and possible solutions to common problems.
Symptom Solution
No power • Make sure that the system is powered on by checking the status
indicator (see page 14).
• Unplug the power cords for the wireless receivers and soundbar, and
plug them firmly into a live AC (mains) outlet. Repeat the pairing
process (see page 11).
• Use the SoundTouch® 300 remote to power on the soundbar.
Wireless receivers
don’t pair with the
soundbar
• Unplug the power cords for the wireless receivers and soundbar, and
plug them firmly into a live AC (mains) outlet. Repeat the pairing
process (see page 11)
• Reset the soundbar (refer to your SoundTouch® 300 owner’s guide).
TROUBLESHOOTING

18 - ENGLISH
TROUBLESHOOTING
Symptom Solution
No audio • Unmute the system.
• Increase the volume.
• Make sure that sound is coming out of your SoundTouch® 300
soundbar (refer to your SoundTouch® 300 owner’s guide).
• If your source is connected to your TV, select the correct TV input
(refer to your SoundTouch® 300 owner’s guide).
• Unplug the power cords for the wireless receivers and soundbar, and
plug them firmly into a live AC (mains) outlet. Repeat the pairing
process (see page 11)
• Make sure that one wireless receiver is set to the L (left) channel and
the other to the R (right) channel.
• Make sure that the positive and negative speaker cable wires are
securely inserted into the adapter. Firmly plug the adapters into the
speakers.
Intermittent, poor or
distorted sound.
• Test dierent sources if available.
• If you have not already completed the ADAPTiQ® audio calibration
process, run it now (see page 12).
• Make sure that the positive and negative speaker cable wires are
securely inserted into the adapter. Firmly plug the adapters into the
speakers.
• If placing the speakers in a cabinet or on a shelf, position them as
close as possible to the front edge of the shelf for optimum acoustic
performance.
No surround sound • Make sure that your TV can output surround sound audio (refer to
your TV owner’s guide).
• Make sure that one wireless receiver is set to the L (left) channel and
the other to the R (right) channel.
• Make sure that the positive and negative speaker cable wires are
securely inserted into the adapter. Firmly plug the adapters into the
speakers.

ENGLISH - 19
TROUBLESHOOTING
Unable to complete ADAPTiQ®
audio calibration
Listen to the voice prompts for the following error messages:
Error message Problem What to do
1 The microphone on
the ADAPTiQ® headset
cannot detect sound.
• Secure all speaker cables.
• Make sure the microphone opening on the top
of ADAPTiQ headset is not blocked.
• Your ADAPTiQ headset may be damaged.
Contact Bose® customer service for
replacement parts. Refer to the contact sheet
in the carton.
2 The room is too loud. Rerun ADAPTiQ audio calibration when the room
is quiet.
3 The ADAPTiQ headset
is too close to the
speakers.
Move the ADAPTiQ headset farther away from
the speakers.
4 The listening locations
are too similar.
Move 1 – 2 ft. (.3 – .6 m) away from your previous
listening location.
5 The ADAPTiQ
headset cannot take
measurements due to
movement.
Hold your head still.
After correcting your problem, you must rerun ADAPTiQ audio calibration (see page
12). If you hear a dierent error message, contact Bose® customer service for further
instructions. Refer to the contact sheet in the carton.

©2016 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM772083 Rev. 00