Boss Audio Systems BV9997BI User manual

BLUETOOTH~ENABLEDIN-DASH
l"IMEDIA PLAYER (MP3/CD) AM/FM RECEIVER
WITH MOTORIZED, FLIP-OUT
7" WIDESCREE
TOUCH SCREEN
TFT MONITOR
WITH FULL iPod@CONTROL
WITH USB AND SD MEMORY CARD PORTS
AND FRONT PANEL AV INPUT
RDS COMPATIBLE MODEL

(I Before You Start
Important Safeguards 4
About this manual 4
Precautions &
Maintenance 6
Location &function of the controls 1
Remote
control 8
Specifications n
6Installation
Wiring Connections 12
Installing the Unit 13
Detach the Unit 14
Installing the Front Panel Ii
Detach the Front Panel Ii
I) Common Operations
To Select Source by Menu •
Reset
the Unit •
Turning the Unit
On/Off •
Volume Control •
Setting the Sound Characteristics •
Adjust the Angle •
EQ Setting 11
Turning Loudness On/Off 11
Insert a SO Card 11
Eject aDise 11
Mute Function 11
Mode Selector 11
Infrared Sensor 11
Double Function 11
eMain Menu
Main Menu Setup 18
Video Adjustment 18
Audio Adjustment 18
Time Adjustment II
Screen Adjustment II
System II
o OlSCIVCOIMP4
DISc/VCD/MP4 Setup 23
DISc/VCD/MP4 Operation 23
Selecting Tracks 23
Number Buttons 23
Pause the Playback 23
Stop the Playback 23
Play tracks at Random 24
Repeat Playing 24
Skip backward/forwardlF.F/F.REW the
Playback
24
System Switch 24
Slow Motion Playback 24
Increase Picture Size 24
On Screen Display 24
Setting the Playback Time 25
Changing Audio Language 25
Changing the Subtitle Language 25
Changing the Viewing Angle 26
Selecting Channel 26
Program Playing 28
Playing PBC(Menu) 28
Selecting Menu 21
DISC Setup Menu 'JJ
Q COIMP31S0lUSB
CD/MP3/SDIUSB Setup 34
CD/MP3/SDIUSB Operation 34
Selecting Tracks 3&
RepeatP~ying 3&
Number Buttons 3&
Selecting Track 3&
Stop Play 3&
Playing Tracks at Random 3&
Pause the Playback 36
Skip backwafd/forwardlF.F/F. REW
the Playback 36

On Screen Display Ii
Program Playing 3&
Eject a SD Card 35
Eject an USB 3Ii
o Tuner
Listening to the Radio f1
Band Selector II
Selecting The storedStation II
Manual/Automatic Tuning fI
DX/LOC Selector II
MO/STSelector •
Goto
FREQ II
AMS 38
Number Buttons :I
RDS Setup •
Alternative Frequencies
:.
Traffic Alarm •
Program
Type :.
8AUX
AUX Touch Screen Menu a
o Bluetooth Mode
Bluetooth Operational Interface 41
Using aBluetooth Wireless connection 41
Pairing Your Unit and Bluetooth Phone 4.
Pairing in Handsfree Mode 41
Cel/phone Pairing Mode 4.
Bluetooth Connection and DVDonnection U
Using the Unit as aHandsfree Device U
Last NumberDialing U
To Dial by Cel/phone U
To Dial by the Unit a
Using the Unit as Bluetooth Music a
Audio Transfer between The Unit and
Phone a
m IPOD
IPOD Operation U
Selecting Tracks "
Fast Forward/Fast Reverse U
Repeat Playing U
Playing Tracks at Random U
Pause the Playback U
File Selector U
Eject IPOD U
(I AdditionalInformation
Simple Troubleshooting Guide ..

Section
lID
(Before You Start
IMPORTANT SAFEGUARDS About this manual
1Be sure to connect the color coded wires
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
ion or damage the vehicle-s electrical sy-
stem.
2Be sure to connect the speaker (-) wires
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables each other or to the vehicle body.
3Make
sure all the connections are comp-
letely correct before turning on your unit.
4 When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
5Do
not block vents or radiator panels.
Blocking them will cause heat to build up
inside and may result in fire.
6To lessen the driver's distraction, install
the unit in an appropriate place.
7
Power the unit on after starting the engine
otherwise it will shut off due to lack of
power.
8Do not place the remote control in aplace
susceptible to high temperature or direct
sunlight. Doing so will damage the remote.
9Do not use the unit in extremely high or
low temperatures. Also avoid high humidity
and direct sunlight. "
10 Take care of the magnetism of the unit.
Do no put the credit card, cassette or w-
atch around the unit.
11 To minimize disturbance of the video
frequency, keep far away from the unit
when using your phone.
This unit features anumber of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations
of the unit.
DISCNCD/CD/MP3/MP4/SD operation
that can only be operated by the remote
control, but there are also functions that
can be operated
by the buttons provided
for the main unit.
WARNING!
Do not watch or operate the video monitor
while driving. Doing so is unsafe and can distract
the driver, which may cause an accident.
In some states or countries it is illegal for a driver
to operate or view a video monitor while driving.
It may also be illegal for a passenger to operate
or view a video monitor in a moving vehicle even
if the driver is not watching it.
Be sure that the installation and operation of this
product is in compliance with local rules and
regulations.

_B_e_~_Ofi_e_~_O_U_S_t_art )Section
CD
PRECAUTIONS
h ~ II DISC
This unit can 01 ay t e o
owinq
s Onlv:
Type of disc
Recorded material
Size of disc
DISC
Sound and moving pictures
12cm
VCD
Sound and moving pictures
12cm
CD
Sound only
12cm
MP3
Sound only
12cm
MPEG-4
Sound and moving pictures
12cm
NOTE: The unit
is compatible with VCDl.O/2.0/3.0 version and DVCD disc.
•When driving, do not attempt to
modify the unit. Modifying the
unit may cause an accident.
•Stop
the vehicle before carrying
out any operation that could
interfere with your driving.
•
Do not turn the unit on in extre-
mely high or low temperature.
Be sure the temperature inside
the vehicle
is between +60' C
and -10' Cbefore turning on your
unit.
•To enjoy optimum sound and
images while playing, handle the
DISCs as follows:
--Do not use your discs with
paste residue or ink attached.
Cfiiti/
--Do not use discs with labels or
stickers attached, which may leave
asticky residue while beginning to
peel
off. (Shown as the picture)
--Clean the discs with an opti-
0nal cleaning cloth.Wipe from the
center out. (Shown
as the picture)
--Handle the DISC by its edge to
keep the
DISC clean, and do not to-
uch the surface.
~

Section
at (Before You Start
Maintenance
Replacing the Fuse
Make sure the amperage matchesthe
specified value when replacing thefu-
ses. If the fuse is blown, replace itwith
anew
one. Be sure you are using one
with thecorrectrating. If the same
problem occurs, it would be subjected
tothemalfunction. In
such cases,
please consulttothe nearest service
dealer.
AWarning
Never use the fuse with therated
amperage
more than thatsupplied to
yourunit, otherwise it will damage the
unit.
Replacing the Remote Battery
When the range oftheoperation of
the remotecontrol becomes short
or
stops operating, Replace the battery.
Be suer to use alithium Batterybutton
Cell Cr2025.
Gently pull out the Battery Holder while
pressing the Stopper.
Putthebutton-typebatterywithmark(+)
upwardinto theBatteryHolder.
Insert the Battery Holder into the Remote
Control.
Precautionson Using Lithium
Battery
Alwayskeepthelithiumbatterybeyond
children's reach. Incase
swallowed,seeadoctorimmediately.
Cleaningthebatterywithadrycloth,
to ensureitsperfectconnected.
Installthebatterywiththeproperpolarity.
Topreventshortcircuit,donotuse
metaltweezertohandlythebattery.
AWarning!
Improperhandle with
the batterymay
lead to explosion.
It cannot be charged, disassembled or
thrown intoa
fire.

__ B_en_o_re_Yo_u_S_f_a_rt )
Location of the Controls
Section
CD
.- -
13
5
,.ANGLE,
II[V] [A] [v] r.",
11
fAI
~o J9
!O 'WR " <0) TA
'::.IPAJR
oLSRC II ~I' II .'~ I I lOU I
"0/_ II ~ J0e
"-
16 el~-----l
19 3 2

Section
lID
C/3efore You Start
Ic
@) ~J:liliiii.i~ ~ ~
FS 5 5' ,
CD
SRC/PWR @
eMENU Button
Briefly press to select radio mode or playback During playback mode, press this button to
mode, press and hold it to turn the unit on or enter the DISC setup menu;
off. during radio mode, press it to enter the radio
a>
~ Eject Button setup menu, press and hold it to enter the
main menu.
Press it to eject aDISC.
Q)
BND/ ~I /[ -=., PAlR] (band selector/play/pause/ ©USB Socket
pair) Button ©v(Back Space) Button
During radio mode, press it to select the bands;
(9
DISC Loading Slot
During playback mode, press it to play or
pause. ®OPEN Button
During bluetooth, press it to pair. ®MUTE Button
@
[<II / ~ / ~ ]/[ ~ / ~ / ~) ]([Search frequency @LCD Screen
backward/Previous/The last phone, Answer a
telephone]/[Search frequency forwardlNext @REL (release the front panel) Button
Track/Hangup, reject acall])
0)
ANGEL A / V Button
®LOU/TA(loudness/traffic alarm) Button
Press it to changes the angle
of the monitor.
@Common SD Card Slot
(j)
VOL+/ VOL-/SEL
®REMOTE Infrared Sensor
®
RESET Button
®
A/V IN

_B_e_~_o_re_Yo_u_S_ta_r_t )
Remote Control
Tips:
For more information on replacing battery, please refer to Replacing the Battery
on page Q.
Section

Section
ID (Before You Start
• SOURCE/PWR
•GOTO (playing time/track)
•
BAND/TITLE
• AMS/MENU
• LOC/SUB-T
•ST/AUDIO (mono or stereo/language or
channel selector) .
•PTY/ANGLE
.OSD
Press it to show the currentinformation.
•ZOOM (zoom
in or zoom out)
• II~ (Slow Forward/Rewind)
•
P/N( system adjusting)
•
~ Mute
•
PROG(Program playing)
•VOL+/VOL-/SEL
•
RPT(Repeat Playing)
•RDM (Playing Tracks at Random)
• II (Pause/Play)
• • (Stop Playing)
•SETUP
•
~/ .. (F.R/F.F)
•
... /~ (Previous/Next Track)
•CLEAR
• O~9 (Number) Buttons
• • (Eject Button)
• TA/LOUD (Traffic
Alarm/Loudness)
•AF/EQ (Alternative Frequency/Equalizer)
Button
• ... / ~/.r"/ ENTER (Left/Right/Up/Down
ENTER)
•
BT (bluetooth mode)Button
•PAIR/VIDEO
During bluetooth mode, press it
to pair.
•
~ /BACK
During bluetooth mode, press to dial, re-dial
or answer aphone.
During IPOD mode, press it
to back to
previous mode.
• '-=' /ROOT
During bluetooth mode, press to hang
up or
refuse aphone.
During IPOD mode, press it to back to the
fIrst catalog.

__ B_en_o_re_~_o_u--=-S---=ta:...:....:-rt-=----- )Section
..
Specifications
Power Requirement 14.4V DC Frequency Range 522-1620(KHz)
(l1-16Vallowable) (Optional) (Europe)
Load Impedance
40
530-171O(KHz)
Max.Power Output (U.S.A.)
85Wx4
IF Range 450KHz
Tone Controls
±7dB
Usable Sensitivity 32dBuV
Bass 100Hz (-20dB)
Treble 10KHz
Dimensions Approx.197x178 x50
mm(d/w/h) VCD SignalSystem AUTO/PALMTSC
Weight Approx.2.7kg Signal-to-noise Ratio 60dB
Separation 55dB(lKHz)
Distortion 0.3%
Resolution 1440X234pIxels
Tuning Range 87.5-108(MHz) Brightness 600NITS
(Optional) (Europe)
87.5-107.9(MHz)
(U.S.A.) DISCSignalSystem AUTO/PALA'HSC
IF Range 10.7MHz Channels 2
Usable Sensitivity 10dBuV Frequency Response 40Hz to 16KHz
(-30dB) Signal-to-noise Ratio 60dB
Signa1-to-noise Ratio 50dB Separation 60dB
Stereo Separation 30dB
(1KHz)
Note:
Frequency Response 40Hz-12KHz Due
to continuous product improve-
ment, specifications and design
are
subject to change without notice.
CD

Section
..
Qnstallation
Wiring Connection
(Brown line with
brown head
(Brown line with
yellow head) rd1t=lI
(Dark Grey line with~
red & white head)
, , (black line with
AUX Video mputyell
ow
head)
FRONT RCA Line
OUTR/L
SUB-WRCA
Bluetooth Phone (Black line with
black head
Rear View
Camera Inpur
AUX A d"
(black line with red
U 10 mput &. white head)
(Grey line with
Video Out 1 yellow head)
REAR RCA Line (Light Grey line with
OUT R/L red & white head)
r------------+I+Hf+++-----.. IPI-',o~d~W~ir~e~C~o~n~ec~t1~' o~n-DIIIIJt::o (White)
r(+5V)
Antenna
<>~&<'.
'0 ~\.)
~o. aD ~·-l
'0..."<::::J
oa...•..
'-:)c=:J <>
•
RearR
Speaker
Front R
Speaker
arking Brake
ront Illumination
ontrol(+12V)
ntenna
ower +
Grey
WhIte
-
IJ
Camera
Oran2e
er
Brown
p
Key~
Red
f-.../
FILTER
"-
Pink F
attery +Yellow &FUSE
~
C
Black
BOX
'"
Blue A
Ground
~
p
Green/Black
"-
Violet/Black
~
1:;1
./
Violet
Green
White/Black
./
Grey/Black
1:;1
./
l:l
.
B
Rear View
Input Trigg
Ignition
RearL
Speaker
Front L
Speaker
• Antenna Receptacle
.. Output Plug(Male)
•
Output Socket(Female)
•
Screw Hole
6) Wire Clip
"
Fan Window

_'_ns_t_al_la_t_io_n )
Installing the unit
MainPartsList
Section
CD
M4x3 &MSxS
Mounting
Sleeve xl
Rear Mounting Bolt xl Harness Rubber xl 4Screws Each
Outer Trim Frame x1Connecting Wire
xl Steel Bar x 1
Installation Method 0: DIN Front-Mount
Install twor M5x6 screws on both sides (left and right)
of the lock hook brackets
Bend these claws CD
outward for atight fit, 1 2
if necessary.
Install the unit with four
M2 x2 screws 3 4
Install Outer Trim Frame

Section
..
CJ nstallation
Installing the unit
Installation Method •
Installation using the screw holes at
the sides of the unit.
Select aposition where the screw holes of
the mounting bracket supplied with the car and
the screw holes
of the main unit become aligned
(are fitted), and tighten the screws
(see@at 2
places on each side). Andthen fasten them to
the car.
l!J Note:
Outer Trim
Frame@and Mounting Sleeve
CD are not used for installation method.
Detach the Unit
1. Remove the outer trim frame.
CD
( 14 )
Bracket supplie~
toyourcar I
Dashboard
orConsole
2. Unscrew the 4screws, pUll the main
unit out.

_'_n_st_a_lla_t_io_n )Section
a
Install the Front Panel Detach the Front Panel
Put notch ®(shown as picture) onto shaft Press REL button in the upper right comer,
@.And then slightly press into the right side. and then the front panel will be released.

Section
1m
(Common Operations
To select Source by Menu
In any mode, press SRC on the monitor, the
following menu will appear:
@Note:
*Pressing PWR button on the main unit also
performs the same function.
Volume Control
EQ Setting
The default setting is OFF.
(!) Note:
*This function is operated by using the remote
control only.
•CLAS I
ROCK ..-J
Press eVOL+button to increase the
sound level and
presseVOL- button to
decrease the sound level.
@Note:
*Rotating VOL+/- on the main unit or VOL+/-
on the monitor performs the same function.
After selecting the desired mode, you can
adjust the current level by
pressing. VOL
buttons.
(!) Notes:
*Pressing SEL with rotating VOL on the main
unit also performs the same function.
While listening to the popular music, classic
music or rock music, you can select the co-
rresponding preset modes to adjust the sou-
nd quality perfectly by
using. EQ button.
Repeatedly
pressing. EQ button to choose
the following modes in tum:
~POP
LOFF .... ---
Setting the Sound Characteristics
Repeatedly press e SEL button to select
the desired mode in the following order:
C VOL~ BALAN~ FADE
SUBWF +---TREBL+--- BASS J
Press it to select your desired item: FM,
DISC, IPOD ,SD Card, USB, BT,AUX, and
press SET to enter into the main menu.
If
you want to enter into bluetooth, press
BT;
if it does not enter into, that means the
unit does not include the function. In any
mode, press SRC to return
to the previous
mode. Press BACK to return to previous
mode.
@Note:
* If the font display in cyan, that means this does
not have this function.
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
Remove the front panel, then press
®RESET
button in the panel with apointed object,
(such as aballpoint pen) to set the unit to
initial status.
@Notes:
*When some errors occur on the display, you can
also press
RESET button to resume to normal.
It will erase the clock setting and some me-
morized functions.
*This function can only be operated by the
main unit.
Turning the Unit On/Off
Briefly press. PWR button to tum on the
unit, during working status, press and hold
it to
tum off or tum on the unit.

__ C_o_m_m_on_O--=-p_e_f;_ot_io_n_s )Section
&I
Turning Loudness On/Off
Press and hold. LOUD button to activate
the loud function. Pressing the button will
increase the low frequency. Press it again
to quit this function.
@Note:
*Pressing LOU on the main unit also performs
the same function.
Ejecta DISC
Briefly press ... while the TFT is slanted to
eject adisc or the TFT will return to the
initial status.
@Note:
*Pressing ~ on the remote control also performs
the same function.
Inserta SD card
Briefly press REL after turning the unit on,
then insert acommon SD card into SD slot.
Then reinstall the front panel.
Angle Adjustment
Press and hold@REL till ANGLE appears
on the monitor, the press ®Ato adjust
monitor backward by definite angle, press
®Vto adjust it forward.
@Notes:
*When adjusting the monitor angle, use this
method! Otherwise the unit will be damaged.
*This function is operated by the main unit only.
Mute Function
Press. ~ button to shut off the sound
output, and "
~"appears on the LCD.
Press it again to resume to previous volume
level.
@Note:
*Briefly pressing MUTE on the main unit also
performs the same function.
Night Mode
Press and hold ®MUTE button to enter
the night mode, press it again to switch to
the normal mode.
@Note:
*This function is operated by the main unit only.
Mode Selector
Repeatedly briefly press. SOURCE button
to select the different modes available.
@Note:
*Briefly pressing SRC on the main unit also
performs the same function.
Infrared Sensor:
Receptor ®on the main unit for the wireless
remote control.

Section
ID
Wain Menu
Main Menu Setup
This menu includes VIDEO, AUDIO,
SOURCE, SYSTEM, EXIT. Press them on
the monitor to set the·desired status.
[!) Note:
*Press and hold SETUP or press MENU on
the main unit to set up this menu; press them
on the monitor to select the option.
1.Video Adjustment
After selecting VIDEO, the sub menu will
appear as follows:
In this menu you can adjust CONTRAST,
COLOR, TINT, BRIGHT, PICTURE.
~ Picture Adjustment
Press PICTURE in this menu, it will appear
as follows:
Press
~ and ~ to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.
[!) Note:
*Adjusting the other options perform the same
operation.

__ M_a_in_M_e_n_u )Section
&I
2.Audio Adjustment
After selecting AUDIO, the sub menu will
appear as follows:
You can adjustVOLUME, SUBWOOF,
BALANCE, FAD, BASS, TREBLE, For
example, press FAD, the setting menu
will appear as follow:
•
Press 1M! and ~ to adjust the desired FAD
level, press EXIT to exit this menu.
(!) Note:
*Adjusting the other options perform the same
operation.
3.Source Adjustment
In the main menu, press SOURCE on the
monitorr, the sub menu will appear as follows:
You can switch all
of the items to ON or
OFF, press the corresponding button to set.
If one of them was set OFF, that function
is null.
(!) Note:
* If the font display is in red, this model does
not contain this function.
4.System Adjustment
After selecting SYSTEM, the sub menu
will appear as follows:
In this menu you can adjust CLOCK SYS,
KEY BEEP and so on.
(!) Note:
* If the item display in sky-blue, then it can not be
set up.

Section
D
(Main Menu
~ Clock System
Press CLOCK SYSTEM on the monitor to
set
12 HOUR or 24 HOUR in this menu.
~ Key Beep
In this menu you can adjust KEY BEEP,
press it on the monitor and select ON or OFF,
the default setting is ON, it means when you
press the keys, they sounded.
~ MONI FLEX
In this menu you can adjust MONI FLEX,
The display screen is flexed automatically
when set AUTO, automatics closes when
set MANUAL.
~ Reverse Pola
Setting REVERSE POLA in this menu.
If the signal is +12V ,please press
BATIERY in the monitor If the signal is
av, please press GROUND.
~ Lamp SEL
In this menu you can adjust LAMP SEL,
press it on the monitor and select
ON or OFF,
the default setting
is ON.
~ AMS Fullup
In this menu you can adjust AMS FULLUP
If the setup is ON, when the presettab1e
stations are full, no new station is allowed to
store.When you select OFF, it will search
continually.