bossauto SHA56 Technical manual
With Brushless Motor
With Brushless Motor
220V~240V/150 mm (6 in)
DIRECT ELECTRIC RANDOM
ORBITAL SANDERS
OPERATION
INSTRUCTION
Thank you for purchasing our products.
◎For completely understanding the functions of the product and
operating it correctly please read this Operation Intruction carefully
before unsing.Please keep this instruction for future reference.
SHA56
CONTENTS
1. Important Safety information and product range application 1
2. General power tool safety warning 2-5
3. Tool appearance and names of each parts 6
4. Product specification and operating instructions 7-10
5.Convenient error resolution and maintain 10-11
6. Accessory information 11
7. Exploded View 12
8. Spare parts list 13
9. Warranty and term of service
DIRECT ELECTRIC RANDOM ORBITAL SANDER INSTRUCTION
150 mm (6 in)/Orbit: 5mm
2,000 – 10,000 RPM
Input: 220 – 240 VAC 50/60 Hz
Intended Use
This electric tool is intended for use in industrial locations, and used only by skilled,
trained professionals in accordance with the instructions in this manual.
This electric tool is designed to be used with a disc pad and appropriate abrasive for sanding
metals, wood, stone, plastics and other materials. It should only be used for such sanding
applications and within marked capacity and ratings. Only accessories specifically recommended
by US should be used with this tool. Use in any other manner or with other accessories could
lead to unsafe operating conditions.Do not operate tool in water or in an excessively wet
application. Do not use disc pads that have a Max RPM or Max OPM less than the tool Max RPM
or Max OPM rating. Never use disc pads that have a weight and/or size different from what the
tool was specifically designed for.
Summary of Device and Carton Labels containing Safety Information
!
Explanation of Signal Word Consequences
WARNING:
in death or serious injury and/or property damage.
CAUTION:
in minor or moderate injury and/or property damage.
!
!
-1-
Do not expose power tool
to wet conditions.
Electrical risk.
Wear hearing protection
Wear eye protection
Wear respiratory protection
Read operator instructions before using
CAUTION: For safe operation,
see instructions manual
Recycle: Do not dispose in household waste
Please keep the machine away
from fire and heat to reduce the
risk of fire and wire short.
Use resistant gloves.
Read the
Material Data Sheets (MSDS)
Before using any materials
Exposure to DUST generated from workpiece and/ or abrasive
materials can result in lung damage and/ or other physical
injury.Use dust capture or local exhaust as stated in the MSDS.
Failure to follow this warning can result in serious lung damage
and/ or physical injury.
1) Work Area Safety
a) Keep work area clean and well lit.
b)
liquids, gases or dust. Power tools create sparks, which may ignite the dust or fumes.
c)
you to lose control.
2) Electrical Safety
a) Power tools plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
will reduce risk of electric shock.
b)
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Water entering a power tool will
increase the risk of electric shock.
d) Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e)
Hotplugging will damage the power tool.
f)
Use of a cord suitable for outdoor use reduces the risk of electric shock.
g)
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read Failure to follow the warnings
The term “power tool” in the warnings
!
Contact the suppliers of the workpiece
materials and abrasive materials
for copies of the MSDS if one
is not readily available.
!
WARNING
-2-
3) Personal Safety
a)
personal injury.
b)
c)
Carrying power tools with
d)
e)
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g)
these are connected and properly used.
hazards.
4) Power Tool Use and Care
a) The correct
b) Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c)
Such
d) Store idle power tools out of reach of children and do not allow persons unfamiliar with the
Power tools are dangerous in the
hands of untrained users.
e)
Many accidents are caused by poorly maintained power tools.
f)
Use of the power
g) Do not pull the trigger. In order to avoid destroying the power tool.
5) Service
parts. This will ensure that the safety of the power tool is maintained.
-3-
ADDITIONAL SAFETY WARNINGS
!
WARNING
!
Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock the operator.
• Only personnel who are properly trained should be allowed to service this tool.
its use and inspect for worn or damaged components. Correct or replace the suspect
• Prior to use, inspect abrasive product and accessories for possible damage. If damaged, replace
with new abrasive product and accessories available from us.
• Only use accessories supplied or recommended by us.
• If any physical hand/wrist discomfort is experienced, work should be stopped promptly to seek
To reduce the risks associated with loud noise:
as lead painted surfaces, woods and metals:
material being worked on.
-4-
Operate this Electric power tool with our Power Cord.
Other types of power Cord may cause personal injury or damage.
CAUTION
!
• Do not throw electric power tools into the household waste! In accordance with the European
environmentally friendly manner.
materials.
-5-
HEALTH AND SAFETY INFORMATION
RoHS Compliant
This product and the associated component parts are “RoHs Compliant” and do not contain any
code marked on the product.
Waste Electrical & Electronic Equipment (WEEE) Compliant
the groundwater and get into the food chain, damaging your health and well-being.
• When replacing old appliances with new ones, the retailer is legally obligated to take back your
old appliance for disposal at least for free of charge.
Tool Appearance And Names Of Each Parts
FIGURE 1. Sander
-6-
ON/OFF
RPM+
OPERATION
INDICATION LAMP
RPM-
DC Socket
Hose Connection
Backing Pad
Lever
Power Cord
IMPORTANT NOTE:
exposure scenarios. The actual exposure values and amount of risk or harm experienced to an
risk assessment.
-7-
Model
Sander Type
Orbit (mm)
Pad Size
Free Speed (r.p.m.)
Motor Hp (W)
Mains Voltage
Measurement
Weight (Kgs)
Hose Connection
SHA56
Central Vacuum
5(3/16)
150(6)
2,000-10,000
350W Max.
220~240VAC
251*150*94 (mm)
0.9
Ø26.5mm
-8-
PRIOR TO THE OPERATION
HIBERNATION
red and green” alternately.
ABNORMAL INDICATION
The LED indicator shows “ Solid green
+” or “—
Press “ +—
The LED indicator shows “ ” color .
OPERATING INSTRUCTIONS
-9-
MAXIMUM SPEED FUNCTION
from the manufacturer.ON”.
Run” Mode, as long as the Power Supply is turned “ON”.
ON”.
When the Power Supply is turned “OFF
when the Power Supply is turned “ON” again.
MAXIMUM SPEED AND INTERMEDIATE SPEED CONTROL
+ ” or “—
While the Sander is in “Run
SOFT START FUNCTION
OVERLOAD PROTECTION SYSTEMS
Downforce Overload System
Temperature Overheat System
The Sander has the ability to monitor temperature of the internal electronic systems, and can shut
the tool down when temperature reach damaging levels.
During periods that result in high internal temperature, the Sander will shut down if the
internal temperature cools to a level safe for the electronic systems.
ATTACHING DISC PADS
Disc Pads are specially designed to mate to the Electric Random Orbital Sander.
CLEANING
-10-
Convenient error resolution and maintain
NORMAL TROUBLESHOOTING
Abnormity
Abnormal noise while working
Lever abnormality
Please stop using the tool. Please check if the spare parts are damaged, or contact
Please check if the pad is out of shape and need to be changed.
Please check if the plug is inserted successfully or voltage abnormality.
parts of original manufacturer.
This will ensure that the safety of the power tool is maintained.
Abnormal signal Abnormity
abnormally
Motor electric
current abnormity
PCB temperature
abnormity
Motor phase failure
Input low voltage
abnormality
Input high voltage
abnormality
Programs of circuit
board abnormality
Motor temperature
abnormality
Please check if the voltage is too low.
Please check if the voltage is too high.
ABNORMAL SIGNAL TROUBLESHOOTING
red and green” color.
Press ＂—＂red” color.
-11-
LEVER RESET PROCEDURE
maintenance.
+
and the tool now enters the reset mode.
and “+
red.
red,
then release the speed lever immediately(Figura 7). Wait for the red light goes out,
Figura1Figura 4
Figura 6 Figura 8
Figura2Figura 3
Figura 7Figura 5
-12-
Exploded View
20
Model:Sander
12A
1
2
3
4
5
6
7
8
9
10
11
12
14
15
16 13
18
12-1
12-2
12-3
12-4
12-5
17
21
22
19
Spare Parts List
-13-
NO.
DESCRIPTION QTY
1
2
3
4
5
6
7
8
9
10
11
12
12A
12-1
12-2
12-3
12-4
12-5
13
14
15
16
17
18
19
20
21
1
1
1
１
４
１
２
1
1
1
1
１
１
１
１
１
１
１
１
１
２
１
２
２
１
１
１
Lever
Lever Screw M2.6*12
POM Botton
Cover Plate/Light Pipe Included
PCB Screw 2.6*6
220~240V Speed Controller
EVA Plate
VR Pot Set
Adjusting Lever
Adjusting Spring
Housing
220~240V Motor Ass'y, 6"-3/16
Spindle Set/5"-6"
Double Row Bearing
Felt Washer
Washer
Spindle/5"-6"
Retaining Ring/Φ28
Dust Cover A
Dust Cover B
PCB Screw 2.6*8
Hose Connection Set/Φ26.5mm
PCB Screw 2.6*6
Screw 1/8*1
Pad 6"
Power Cord
Pad Wrench
WARRANTY AND LIMITED REMEDY:
WE MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED ARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY
IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
This warranty does not include accessories and consumable spare parts.
Except where prohibited by law, we and seller will not be liable for any
loss or damage arising from our product, whether direct, indirect, special, incidental or
or strict liability.
Repair of this Abrasive Power tools that are not
Contact our Abrasive Power Tool Distributor for details.
Warranty
Product name:
Stamp of the store:
Data of the Supplier: (yyyy) (mm) (dd)
(This product comes with a one-year full warranty form the date
of purchase with the normal using.)
Name:
Address:
Table of contents
