Bosstab Elite Nexus User manual

Getting started guideElite Nexus Freestanding & Adhesive Mount
1. Unlock case with keys
provided and remove
faceplate.
3. Place faceplate back on
and lock. Follow steps 4-6 for
adhesive mount instructions
5. Stick 3M adhesive to the
base of stand and rmly
place down on your mounting
surface.
2. Feed cable through the
stand and plug in your tablet
while placing it into the case.
4. Wipe base of stand and your
mounting surface with alcohol
wipes provided and let dry.
6. Let the stand sit for 24
hours before use.
Optional Position Lock
Rotate stand 45 degrees so cable hole is on the
left, then screw in lock screw as shown. This will
lock the rotation for a xed option.
Optional Cable Cutout
Unscrew existing closed cable cutout and install
the open cable cutout included with stand.
DESIGNED FOR DIGITAL USE ONLY

Getting started guideElite Nexus Screw Mount
1. Remove screws from case
and lift the case o the stand.
3. Drill pilot holes to assist with
screw base mounting. Refer
to the mounting guide for
assistance.
5. With the cable channel facing
out the left hand side of the
stand, screw down your stand
using the wood screws provided.
2. Follow the above locations
to line up your surface
mounting and cable feed.
Cable feed hole
TOP VIEW
Screw base holes
4. If you are running your
charging cable through the
surface, ensure to drill a larger
hole to feed cable through.
7. Unlock case with keys
provided and remove
faceplate.
9. Place faceplate back on
and lock.
6. Place case back on the
stand and screw back in the 4
screws.
8. Plug in your tablet while
placing it into the case.
For more information or to
contact our sales & customer
support team please click on
the links below:
Contact Us
Warranty & Returns
Shipping
DESIGNED FOR DIGITAL USE ONLY