Bouclair 9402208 User manual

3
Questions? [e-mail] / 1-800-268-2524
ASSEMBLY INSTRUCTIONS
FLOOR LAMP
SKU9402208
IMPORTANT
•We suggest you read this leaflet carefully and entirely before beginning the assembly and installation of this lighting
fixture.
•Carefully check that you have all parts before beginning assembly.
•Keep fittings out of children's reach and keep children well away from the assembly area.
•This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug
can be fully inserted. Do not alter the plug.
•For your safety and convenience, it is strongly recommended that two people install the lighting fixture.
•This fixture has been rated for up to one 60-watt maximum TYPE A light bulb (not included) or one 13-watt
compact fluorescent light bulb (not included) or one 9-watt SBLED light bulb (not included). To avoid the risk of fire,
do not exceed the recommended wattage.
•This lamp is meant for indoor use.
WARNING
•To reduce the risk of fire, electrical shock, or personal injury, always turn off and unplug the light fixture and allow it
to cool before replacing the light bulb.
•Do not touch the bulb when the fixture is turned on. Do not look directly at the lit bulb.
•Keep flammable materials away from the lit bulb.
TOOLS REQUIRED (Included)
Wrench
PARTS LIST
(A) Metal Base (1pc)
(E) Middle Tube (1pc)
(B) Set Screws (6pcs +2pcs spared)
(F) Curved Tube (1pc)
(C) Stand Tube (1pc)
(G) Metal Shade(1pc)
(D) Wood Shelf (1pc)
(H) Wrench (1pc)

3
Questions? [e-mail] / 1-800-268-2524
PRE-ASSEMBLY
•Before starting the installation, shut off the power supply at the electrical panel by switching off the circuit breaker
or removing the appropriate fuse. Cutting the power at the light switch is not sufficient to prevent electrical shock.
•Remove all parts and hardware from the box along with any plastic protective packaging.
•Do not discard any contents until after assembly is complete to avoid accidentally tossing small parts or hardware.
TO ASSEMBLE
1. Put the Stand Tube(C) onto the Metal Base(A). Fix the Stand Tube(C) on the Metal Base(A) by screwing two Set
Screws(B) into the holes. Please see Fig.A1.
2. Rotate the Middle Tube (E) clockwise onto the Curved Tube(F) until tight. Please see Fig.A2.
3. Put the Wood Shelf (D) onto the Stand Tube(C). Fix the Wood Shelf (D) on the Stand Tube(C) by screwing two
Set Screws(B) into the holes. Please see Fig.A3.
4. Put the Middle Tube (E) onto the Wood Shelf (D). Fix the Middle Tube (E) on the Wood Shelf (D) by screwing two
Set Screws(B) into the holes. Please see Fig.A4.
5. Screw the specified light bulb into the socket in Metal Shade(G). Please see Fig.A5.
LAMP CARE INSTRUCTIONS
•Wipe with a clean, soft, dry cloth or static duster.
•Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish.