Boult Audio Probass Curve User manual

Auto-pairing Mode (Re-pairing with your device)
Step 1: Turn-on the bluetooth on your device.
Step 2: Press and hold the multi-function button for 3-4 seconds
(approximately) to power-on the Neckband.
Step 3: The neckband will connect to your same device
automatically. If not, connect to Boult Audio Curve in
the bluetooth settings on your device.
Pairing for the rst time
Please refer to the Safety Precautions mentioned on the last page
of this manual before operating this device.
Step 1: Make sure the product is fully charged.
Step 2: Press and hold the multi-function button for 5-6 seconds
(approximately) to power-on the neckband. The neckband
Now, the neckband is in paring mode & ready to connect
with your device.
Step 3: Turn-on the bluetooth on your device & scan until you see
Boult Audio Curve
Step 4: Click on Boult Audio Curve and pair your device with
the neckband. Once paired, the neckband will indicate
Now, you can enjoy your music & calls.

Product Introduction
Volume-/Previous Track
Volume+/Next Track
Earbud
Multi-function button
Indicator Light

Charging the neckband

This product or the bluetooth functions cannot/should not
be used during charging.

when the neckbands battery need to be charged.

charging.

charging is complete.
Functions
Voice assistance
Click on the multi-function button for 2 seconds to activate
the Google assistant/Siri.
Google assistant/Siri will pop up on your phone screen.
Play/Pause music
Single click on the multi-function button to play/pause the
music.
Answer/End/Reject calls
Single click on the multi-function button to answer/end a
call.
Press & hold the multi-function button for 2 seconds to
reject the incoming call.

Redialing the last call
Double click on the multi-function button to redial the last
phone number on your mobile phones dialing list.
Change music track
Press & hold the (-) volume button for one second to
change the music track to the previous track.
Press & hold the (+) volume button for one second to
change the music track to the next track.
Increase/Decrease volume
Single click on the (-) volume button to decrease the
volume.
Single click on the (+) volume button to increase the
volume.

Press and hold the multi-function button for 3-4 seconds
(approximately) to power-on the neckband.
powered-on.
Press and hold the multi-function button for 3-4 seconds
(approximately) to power-o the neckband.
switched-o.

Safety Precautions
Please keep this device away from extreme heat, humidity
or corrosive environment.
Please don't over-charge the neckband as it will decrease
the service life of battery.
Please use only a good quality phone charger (5V/1A) or
This product or the bluetooth function should not be used
during charging.
Please make sure to follow the instructions provided in this
manual for your safety and to extend the life of the neckband.