Focusrite Vocaster HP60v User manual

focusrite.com Tell the world 1
Introduction
Hear your show in perfect detail with the Vocaster HP60v closed-back
studio headphones. The Vocaster HP60v headphones let you hear
your show as the world will.
The Vocaster HP60v headphones include:
• A lightweight adjustable cushioned headband for extended
listening periods.
• Screw-on 6.35mm stereo jack adaptor to use the Vocaster
HP60v headphones with all your devices.
• Wide, smooth frequency range to accurately monitor your
recordings.
• Closed-back design to isolate external noise and provide the
best conditions for monitoring.
The closed-back design stops your microphone picking up your mix
and the comfortable headband means you can tell your stories and
produce your show for as long as you like.
Dimensions
≈85 mm
User Guide
≈195 mm
≈156 mm

focusrite.com Tell the world 2
Setup
Using the 6.35mm Jack Adaptor
You can use your Vocaster HP60v headphones with most audio devices however not all
audio equipment uses the same size headphone connector.
To connect to your Vocaster, or most audio interfaces, you need to use the included
6.35mm jack adaptor. To connect to smaller devices like a laptop or phone you need to
remove the 6.35mm jack adaptor by unscrewing it from the headphone cable.
Screw on the 6.35mm jack adaptor clockwise to connect the headphones to your Vocaster
or audio interface:
Vocaster HP60v FAQs
The headphone jack is too big/small to t the headphone output on my device
The Vocaster HP60v headphones include a screw on 6.35mm jack adaptor. For smaller
devices like phones and computers you need to unscrew the adaptor (anti-clockwise) to
use your headphones.
Can I use the Vocaster HP60v headphones with any device?
Yes, you should be able to use the Vocaster HP60v headphones with almost any device,
other interfaces, phones, laptops, mixing consoles and more
Are the Vocaster HP60v headphones on-ear or over-ear headphones?
The Vocaster HP60v headphones are closed-back over-ear headphones.
SpecificationsSpecifications
Technical Specications
Performance
Impedance 32Ω
Sensitivity 98dB ±3dB
Frequency Response 20Hz - 20kHz
Maximum Power 1.2W
Physical Characteristics
Loudspeaker Diameter 50mm
Cable Length 3m (approximately)
Connector 3.5mm Stereo Jack
6.35mm screw-on adaptor
Weight (including cable) 288g (10.15 oz)

focusrite.com Tell the world 3
Accessories and Spare Parts
Part Part Number
Gold screw-on 6.35mm stereo jack adaptor - HP60v MISC002200
Single ear cushion (left or right) - HP60v MISC002201
To get spares for your Vocaster HP60v headphones please either contact our Spares team
or speak to your local distributor:
Contact our Spares Team: support.focusrite.com
Contact your local distributor: stockists.focusrite.com